On the Smart Key remote, simultaneously press the red alarm button and the lock button for about 5 seconds until you hear it beep. Unlock the doors using the Smart Key remote and open one of the doors. Repeat these steps until you get to the desired mode.
What does a smart key unlock?
The smart key allows the driver to keep the key fob pocketed when unlocking, locking and starting the vehicle. The key is identified via one of several antennas in the car’s bodywork and a radio pulse generator in the key housing.
Why won’t my key unlock my car?
Lubrication. An old lock might just need some lubrication in order to turn properly. In this event, use some professional lubricant like W-D 40 to get the gears sliding better, then try the key again. If the problem was just debris or rust, lubricant will solve it.
What is a SmartKey lock?
SmartKey is an advanced security breakthrough which allows you to rekey the lock in seconds. To rekey your lock with an entirely new key, simply insert the functioning key, turn a quarter turn clockwise, insert the learning tool, remove the existing key, and insert a new key.You just easily rekeyed the lock.
Where is the smart key deactivation switch?
Located at the bottom of the instrument panel below the steering wheel, the Smart Key deactivation switch is a little known element that could cause you a headache. Just flip the switch and you will be back in action.
How do you unlock a door without a key with a bobby pin?
Open up a bobby pin and bend it at a 90-degree angle.
Spread the wavy and straight ends of the bobby pin apart so that it bends at the center and looks like an L. This bobby pin will serve as the pick that you’ll use to unlock the door.
What is lock/unlock feedback lights?
When the Remote Unlock Light Feedback feature is turned on, then the vehicle’s exterior lights will flash when the remote keyless entry (RKE) transmitter is used to unlock the doors. Turning the Remote Unlock Light Feedback feature on or off takes only a few seconds: 1.
What is auto relock timer?
This feature will automatically lock all of the doors after a preset time (ie you get home from work, head into the house without locking the doors, and then 30/60seconds later the doors will lock).
Is it OK to use WD40 on door locks?
The simple answer is you should not use WD40 to lubricate locks. WD-40 is one of the solvent-based lubricants and does not contain any lubricant and over time can make your lock even stickier by gumming the lock up.
How do I reset my Kwikset SmartKey lock without key?
What You Will Need to Follow this Tutorial
- Prepare Necessary Tools And Workspace.
- Remove The Locks From Your Door.
- Free The Cylinder From The Housing.
- Get The Plug Out Of The Cylinder.
- Pull The Plug Out Of The Core.
- Find The Reset Tab To Align The Wafers.
- Insert New Key.
- Reassemble The Lock.
Are Kwikset SmartKey locks safe?
Kwikset smartkey locks are certified Grade 1 security for residential use by the Builders Hardware Manufacturers Association and are advertised by Kwikset as being invulnerable to being hacked with wires, screwdrivers, or anything else inserted in the keyway.
How do I unlock my Kwikset Smartcode?
Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor. As the last number of a correct code is pressed on the keypad, the electric motor swings into action and retracts the deadbolt.
What is the master code for Kwikset lock?
0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Why is my Kwikset lock blinking red?
Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.
Contents