Attach a piece of wood the same thickness across the top back of the cabinet with screws and glue. Then screw inside the cabinet to the wall studs. This will keep the cabinet vertical and prevent things from falling between the wall and cabinet.
How do you make a wobbly bookcase sturdy?
A bookcase has more of a tendency to wobble when it’s top-heavy. Prevent this by concentrating weight on the lower shelves. If you have heavy carpeting, make the bookcase more stable by pulling back the carpeting and nailing a wooden shim to the floor at the position of each of the feet.
How do I keep my kitchen cabinets from tipping over?
Here is what I recommend to help prevent furniture tip-overs from happening:
- Secure furniture to the wall.
- Put cabinet locks on the drawers.
- Don’t place items on top of dressers, cabinets, and TVs.
- Keep furniture away from windows, where possible.
How do you stabilize a bookshelf without backing?
How to Fix a Wobbly Bookcase
- Option 1: Carpet shims. Pull back the carpet.
- Option 2: Adjustable feet. Drill holes and install adjustable feet on the bookcase corners to level it from front to back and side to side.
- Close-up of adjustable feet. Tap the adjustable foot into the drilled hole to fully seat the plastic sleeve.
How do you secure a freestanding bookcase?
Place silly putty, velcro, or surfboard wax under breakables, to keep them from falling off shelves. Add a thin strip of wood as an additional barrier.
Do cabinets need to be reinforced for granite?
No. Granite is heavy, typically weighing between 16 to 17 lbs. per square foot. But if you have standard manufactured cabinets (or custom cabinets of compatible strength), you do NOT need to add any reinforcement to your cabinets, assuming you are using 3cm (1 ¼”) thick granite..
How do you anchor a shelf to the wall?
Use a standard level to make sure it’s placed in a straight line, then lightly mark the wall with a pencil on both ends. Position the shelf brackets against the wall along the bottom of the shelf. Mark inside the holes so you know exactly where to insert the screws. Remove the shelf and the brackets from the wall.
How do you reinforce a bookcase?
For an existing bookcase, you can strengthen the shelves either by adding small panels to the interior sides of the bookcase to serve as dadoes or by securing narrow strips of wood, called cleats, below each shelving board.
Why do bookshelves lean forward?
This is because over time, buildings settle as the ground compacts, especially in older homes, inevitably leaving floors and walls warped or uneven. It’s why fridges and desks often have adjustable feet for leveling. Ladder-style and other leaning bookshelves frequently need old-school tweaking and some patience.
How do I reinforce an Ikea bookcase?
To correct and strengthen your BILLY, all you need is a few more nails (consider using double the nails as suggested in the original instructions) and some wood glue. Place the flimsy backing piece back on your bookcase as directed, but use more nails hammered more closely together.
Are Leaning bookcases safe?
If positioned properly, the leaning bookshelf should not move, and the weight of the items stored on the shelf will contribute to the stability of the unit. These bookcases are best used in out of the way places in a room, rather than in walkways or areas in which someone could easily bump into them.