Adjust the tension and length of the rod. Place one hand on either side of the spot where the rods connect and twist counterclockwise to lengthen the tension rod or clockwise to shorten it.
Can you cut an adjustable curtain rod?
Most hollow core metal drapery rods can be cut using a hacksaw with a fine cutting blade. Or, as long as you have a fine metal blade, you can use a powered miter saw.Make sure your hold the drapery pole firmly in place while you cut if you’re using a hand saw.
Can you change the ends of curtain rods?
Absolutely. If you feel like changing things up, finials are easily removable.
How do you disassemble a tension rod?
Turn your right hand away from you in a counter-clockwise direction. You may hear small popping sounds as the spring releases tension. Continue turning the rod. The rod will unscrew and release from the wall.
Can you shorten a shower curtain rod?
Place the coping saw blade directly on the marker line of the shower curtain rod. Keep the blade straight up and down to avoid making an angled cut. Place the blade end that is closest to your hand on the mark, and pull back on the saw to make your first cut. There will actually be a slight cut mark at this point.
How can I make my shower curtain rod shorter?
You adjust the length of a tension rod by twisting one section while holding the other steady. Twist the smaller diameter rod clockwise with respect to the other one to shorten the length and counterclockwise to lengthen it.
Can you cut a shower curtain rod?
Use a hacksaw with a metal-cutting blade. Use long, easy strokes and don’t force the cut; let the blade do the work. Remember that a hacksaw only cuts on the forward stroke. The backward stroke is to reposition the blade for the next forward cutting stroke.
How do you remove the end of a curtain pole?
Examine one of the finial ball ends of the curtain rod. Twist the ball counterclockwise while holding the rod steady. If the ball loosens, continue twisting until it is off the curtain rod. If it does not loosen, repeat the process with the other end.
What do you call the end of curtain rod?
Finials are the decorative end pieces that fit into the ends of the drapery rod to give it a finished, ornamental look. Finials are available in many styles and finishes to coordinate with the style of your room.
Can metal curtain poles be cut?
Metal curtain poles can be cut with a hacksaw, or for a totally square cut, use one of our special curtain pole cutters. Wooden curtain poles can be cut with a fine tooth wood saw. Helpful Hint: Always remember that when you are cutting a curtain pole that is in two pieces you must trim equal amounts from each side.
Do curtain rods tighten?
Look at the back of your curtain rod brackets. There may be a screw that you can tighten to secure your curtain rod in the bracket to prevent sliding. Ensure the screws are properly tightened.
Can you shorten a curved shower rod?
You have to cut the rod long enough to span the distance, but it needs to have clearance on both ends to fit on the hangers. The instructions that come with the rod should advise you of the proper clearance.