How Do You Set Up Ideal Touch?

Open the Ideal Touch app, tap on create an account and follow the in-app instructions. During app set up the gateway pin will be requested. Locate the 12 digit gateway pin on the base of the gateway, and record the PIN below. Check the batteries are inserted correctly.

https://www.youtube.com/watch?v=3Zt6vbXJsp8

How do I pair my ideal touch thermostat?

Hold the thermostat approx 2 metres away from boiler. Locate the gateway adjacent to the house wireless router and connect the supplied ethernet cable from the gateway to the wireless router as shown. Connect the Gateway power cable and 3 pin plug together, then connect the 3 pin plug to a convenient mains socket.

How do I connect a wireless thermostat to my boiler?

To connect a smart thermostat to your boiler, the thermostat will require a power source (battery or wired), as well as a receiver box if one is required. Use the screen and the buttons on the thermostat to navigate the system. In some cases, both devices will automatically connect when they are turned on.

How do I reset my ideal boiler?

REsET PROCEDURE
The boiler will repeat the ignition sequence. If the boiler still fails to light consult a Gas Safe Registered Engineer or in IE a Registered Gas Installer (RGII).

How do I connect my ideal touch to my boiler?

Connect the Touch transceiver electrical plug. Push fit the Touch transceiver into the boiler. Using a flat bladed screwdriver remove the back cover from the Touch thermostat and insert only 3 batteries. Immediately insert the fourth battery into the thermostat.

Why is my wireless thermostat not working?

Common issues you will find with a wireless thermostat are application bugs, signal interference, and a faulty wireless relay box. If resetting didn’t fix the communication problems, try addressing these issues first. When things don’t improve, you can narrow it down to faulty hardware.

Can I control my ideal boiler from my phone?

You’re in control. The Ideal Touch Connect heating app allows complete control of your heating system anytime and anywhere from your smart phone and web browser.With over 40 time and temperature periods per week, the Touch app can handle even the busiest of lifestyles with ease.

Why is my boiler not switching on?

There are a variety of reasons why your boiler may not be working; common examples include the boiler pressure being too low or too high, a power cut, gas supply issues, a faulty pilot light, a frozen condensate pipe, faulty internal components or a more complex issue.

What is the E setting on an ideal boiler?

The Logic Combi is a high efficiency combination boiler which is most efficient when operating in condensing mode. The boiler will operate in this mode if the CH temperature control (C) is set to the ‘e’ position (economy mode). This control should be set to maximum for very cold periods.

What temperature should my combi boiler be set at?

Modern boilers will have a digital dial where you can set the output temperature. For combi boilers it is recommended to set the output temperature for the radiators at 75 degrees and the water temperature at 60 degrees.

Do I need to press the reset button on my boiler?

Often, a boiler can be returned to normal working order by resetting it. This is done by pressing the button or turning one of the thermostats to reset for 3 seconds before turning the stat back up.If your heating isn’t coming on and you’ve checked the power supply and pressure you may need to reset the boiler.

How do I fix my touchscreen thermostat?

First, you should try replacing the batteries and factory resetting your touchscreen thermostat. Also, try removing the cover of your thermostat and checking the wiring to make sure everything is attached properly.

Why do I have to keep pressing the reset button on my boiler?

If you find that you keep having to reset your boiler, it’s likely that there could be a fault with your heating system. This fault could eventually lead to a more serious issue such as a boiler breakdown, so it’s best to seek out a solution as soon as possible.

Where is the reset button on an ideal combi boiler?

For the newer range of Ideal boilers, such as Logic+ and Vogue, this can be done by either pushing the reset button underneath the display, or going into the menu settings on the display.

How do you reignite a boiler?

How do you relight the pilot light on a boiler?

1. Turn the gas to ‘pilot. ‘
2. Press and hold the reset switch for one minute and hold a flame to the pilot light at the same time.
3. If all is working as expected, return any casing/doors and turn the gas from ‘pilot’ to ‘on.

Why won’t my ideal boiler fire up?

If the boiler is not igniting at all, faulty ignition leads are a likely cause. If the boiler is trying to ignite (so the ignition leads are working correctly), the sensors on the boiler may be the problem. Boilers have a flame and ignition sensor. Over the years, they can get carbon deposits and other debris on them.

What is a touch Connect gateway?

The gateway provides connection to the internet, via an Ethernet cable plugged into the home’s router, and communicates with the boiler and thermostat via an 868MHz RF signal.

Why is my ideal thermostat flashing?

If a battery symbol is blinking, the display is blinking or the display is blank then replace batteries. 1. During normal operation light (A) is on for Hot water Operation.If less than 4 lights are on either the room thermostat is too far from the boiler or the batteries in the room thermostat need replacing.

Why does my thermostat say no signal?

If the heating is on you will see an “ON” message on the thermostat display. When you can see that the ‘status’ and ‘central heating’ lights on the receiver have turned green you’re done! If your thermostat is still showing a ‘No Signal’ message, your heating devices should be manually reset and paired.

What do you do if your thermostat is not working?

If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover. If it looks dirty inside, use canned air or a soft artist brush to clean away accumulated grime that may be affecting its functionality. Then look for issues like loose wiring or terminal screws and tighten them up.

How do I change the battery in my thermostat?

Battery Replacement: Un-clip the thermostat from its cradle by sliding the thermostat upwards. Using a flat bladed screwdriver pop off the rear cover Replace batteries Refit battery cover Batteries should operate for approximately 18 to 24 months.