Sync Time in Wyze App
- Using the Wyze app, navigate to the Home tab and select any Wyze Cam or device.
- Click the Settings icon. on the top right.
- Tap the Advanced Settings.
- Press the Sync Time tab to cause your Wyze Cam to adjust its timestamp to the time on your phone or tablet.
How do I manually update my WYZE camera?
Power off your camera and insert your MicroSD card. Hold the setup button, plug in your USB cable, and keep holding the setup button for 12-15 seconds, then release the button. Wait for 3-4 minutes. The camera will reboot and change light status during this time.
How do I reset my WYZE camera?
With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.
How do I fix my WYZE camera?
Basic Troubleshooting
- Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name.
- Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network.
- Power cycle your Wyze Cam.
- Force close the Wyze app, then open it again.
How do I reconnect my Wyze camera?
Steps to Connect Wyze Cameras to New Wi-Fi
- Launch the Wyze app on your Android or iPhone.
- Log in if you haven’t set the app to remember you.
- Connect your Wyze camera to the USB port or a power outlet.
- Hold the Setup button on the back of the camera until you hear the automated message ready to connect.
How do I reset my Wyze bridge?
Remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, wait 5 seconds, and then plug the Bridge back in. If the Sensor is still not connected, try the setup process for the Sensor again. We also recommend setting up the Sensor near the Bridge.
Why is my Wyze camera blinking blue and yellow?
Flashing yellow, yellow and blue, or blue
Power cycle the camera by unplugging the power and plugging it back in. If the camera returns to flashing yellow but never reconnects, set the camera up as a new device. On the Home tab of the Wyze app, tap the + plus sign in the upper left, then select “Add Device”.
To set up your Wyze Cam or Wyze Cam Pan:
- In the Wyze app, tap Home, then tap + plus sign on the top left.
- Tap Add Device.
- Tap Cameras > Wyze Cam or Wyze Cam Pan.
- With your camera plugged into an outlet, tap Next in the app.
- Pull the base from your camera and single-press SETUP on the bottom of the camera.
Which WYZE camera is the best?
Wyze Cam
Hard to Beat
The Wyze Cam V3 is one of the most feature-rich home security cameras you can buy, even if you’re willing to spend more money. It not only delivers high-quality 1080p video, it also offers color night vision, local and cloud storage, intelligent motion and sound detection, and voice control.
What is the difference between Wyze Cam v1 and v2?
The Wyze Cam has two versions, v1 and v2.The Wyze Cam v2 has higher sound quality made possible by a Class-K audio power amplifier and a new audio chip that significantly reduces TDD interference and EMI. The Wyze Cam v2 has a matte finish instead of the glossy finish of the original Wyze Cam to reduce reflection.
How do I set the schedule on my WYZE plug?
To create a schedule to turn on your Wyze Plug every Sunday at 12:00 PM.
- Tap Home, then the + plus sign on the top left.
- Tap Add Rule, then select Schedule from the list.
- Tap the Wyze Plug you want to create a schedule for.
- Select Turn On, then Next.
- Tap the + plus sign next to Name (Optional).
- Tap Start Time.
Why does my WYZE camera keep going offline?
Troubleshooting: Try power cycling your camera by unplugging for about 30 seconds and plugging it back in. Reboot your router.
What do red lights mean on WYZE camera?
Status light state: What does the light mean? Solid red light. Camera is powered and starting up. Watching live stream.
What does error code 90 mean?
A 90 error code is a common code. In most cases it is either installation or environmentally related. Bad combustion means the unit is not burning properly; either you have an issue with air, gas, or venting. There is a test that can be done to determine if the issue is one of the above problems.
Does WYZE Cam need to be plugged in?
In addition to being powered through the Micro USB port, the Wyze Cam Outdoor has an internal battery that allows it to work without being plugged in.
The Bridge acts as a hub that allows your sensors to connect to your home’s WiFi via a Wyze Cam v1, v2, or Pan.
Does WYZE sense still work?
Insert the included bridge into the back of a Wyze Cam, add a sensor in your Wyze app, activate the sensor, and it’s ready to go. One Bridge can support up to 100 Wyze sensors and has a signal range that will work throughout most US homes.
Specs.
| Color | White |
|---|---|
| Finish | Matte |
What is error code 90 on WYZE camera?
Per Wyze’s support site, error code 90 is an internet connectivity issue that requires you to power cycle your cam. Power cycling really just means completely powering off an electronic device. Typically this requires you to disconnect it from its power source.
Does WYZE camera light up when someone is watching?
I have 3 Wyze cameras. One in the newer model with the blue light that turns red when someone is viewing the feed.
Someone viewing camera.
| Status light state: | What does the light mean? |
|---|---|
| Solid red light | Camera is powered and starting up, or Watching live stream or Recording alarm video |
How long does it take for a WYZE camera to charge?
It’s an easy process, as it relies on the Base Station for network communication. Fully charge your Wyze Cam Outdoor before setting it up the first time. This can take up to 4 hours. Once fully charged the light will switch from flashing red to solid red.
Why is the blue light blinking on my WYZE camera?
The blinking blue light indicates that your camera has already acquired the router information, but the network is poor.Reboot your router. 2. Check whether the router your camera connected can work normally.
Contents