How do you reset a Kwikset door knob?
A factory reset will delete all codes associated with the lock.
- Make sure the door is open and unlocked.
- Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
- Press and release the program button. You will hear one short beep.
How do I reset my Kwikset SmartKey lock without key?
What You Will Need to Follow this Tutorial
- Prepare Necessary Tools And Workspace.
- Remove The Locks From Your Door.
- Free The Cylinder From The Housing.
- Get The Plug Out Of The Cylinder.
- Pull The Plug Out Of The Core.
- Find The Reset Tab To Align The Wafers.
- Insert New Key.
- Reassemble The Lock.
How do you take apart a tumbler lock?
Pin tumbler locks are the most common type of keyed lock.
- Remove the two long screws holding the lock in place, using a Phillips-head screwdriver.
- Hold the key plate firmly in your hand, and separate the lock cylinder from it by pushing the cylinder inward until it is free of the key plate collar.
How do I reset my house key?
How to Rekey a Lock
- Step 1: Remove the Doorknob. The first step is to remove the doorknob from the door.
- Step 2: Remove the Cylinder.
- Step 3: Take Out the C-Clip.
- Step 4: Attach Key Plug.
- Step 5: Dump the Old Pins.
- Step 6: Insert New Pins.
- Step 7: Replace the Plug.
- Step 8: Reattach Knob to Door.
How do I factory reset my Kwikset?
1 Factory Reset
- Open your door.
- Extend the latch bolt.
- Slide up the cover to open the back of your lock, exposing the buttons beneath.
- Push and hold the reset button for 10 seconds, until the lock beeps.
- The light ring will flash red, then spin amber.
- The lock has now been restored and is ready to be set up again.
How do I reset my Kwikset master code?
It is recommended that you change it to a code of your own.
- Make sure the lock is unlocked and the door is open.
- Enter your Mastercode – for new install, default is 0-0-0-0.
- Press the lock button. You will hear one beep.
- Press 7.
- Press the lock button.
- Enter a new Mastercode.
- Press the lock button.
Can you put a Schlage cylinder in a Kwikset lock?
Basically, you cannot re-key the lock from Schlage to Kwikset, but you can change the lock cylinder from Schlage to Kwikset. A locksmith will be able to do it for you. Changing the lock cylinder will still cost less from changing the lock itself.
How do I change the lock on my Kwikset?
First, insert the functioning key and turn it ?-turn clockwise. Then, insert and remove the SmartKey learn tool. Follow by removing the functioning key, inserting a new key, and turning it ?-turn counter-clockwise. Your lock is then successfully re-keyed.
How do I program a Kwikset code?
How do I program my SmartCode 913 lock?
- Open the door.
- Remove battery cover.
- Press the program button once.
- Enter new user code.
- Press lock button.
- If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.
What is rekey service?
Rekeying is simply changing the inside parts of a lock to operate or work with a new key. Most locks have little pins inside of the lock that match the cuts of a specific key. To rekey a lock to a new key, a locksmith will just need to replace the pins inside the lock to match a new key.
What is the master code for Kwikset lock?
0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Contents