How Do You Reset A Tuya Door Lock?

Remove the battery cover, long press ‘Set’ for 3 seconds. The system restore to the factory default settings.

Reset The Lock

1. After the reset, all the information are removed (including administrator).
2. The password will retum to its default ‘1234567890’.
3. Please add a new administrator immediately.

How do I connect my Tuya smart to WIFI?

Download & register an account on the Smart Life or Tuya App. Open app then select “+”. Now follow the instructions on the app. Enter your WIFI credentials to connect to your home network.

How do I reconnect my Tuya smart light?

1. Connect your device to the power source and turn it on.
2. Open the App, select “+” on the top right of the home page to add device. At the net-pairing page, select the type of product.
3. Make sure the device is in net-pairing status: the Wi-Fi indicator light blinks quickly (twice a second)

Why is my Tuya camera not working?

Check whether the router is powered off or disconnected from the network. If so, the router will take some time to recover.Check whether the router has been replaced, or the Wi-Fi name or password has been changed. If so, remove your device and then add it to the network again.

How do I reset my Tuya smart socket?

Reset Your Device
To reset your Tuya smart plug, turn it on and then press and hold the Power button (for about 5 seconds) until you see a rapidly blinking light. The rapid blinking light indicates the device is reset. You can now start the connection process again.

How do I reset my Tuya smart camera?

How to reset device?

1. Long press reset button for 5 seconds until indicator light flashes, representing successful reset;
2. Indicator light quickly flashes (2 times per second), representing quick connect mode;
3. Indicator light slowly flashes (one time per 3 seconds), representing AP mode;

How do I reset my Tuya Smart LED strip?

press and hold the power button of wifi led controller for 5-6 seconds , then you can reset the light strip controller again.

How does Tuya smart work?

You can create a TuyaSmart account using your email address or mobile phone number. From our experience using mobile phone number is a better option as it helps later to quickly share any smart devices with your flatmates or family. enter your mobile phone number or email address and tap on “Get Verification Code”.

How do I setup my Tuya camera?

Device Connection

1. Open the tuya smart app.
2. Confirm indicator rapidly blink, Input you Wi-Fi Password and start Wi-Fi Configuration.
3. Account and device binding successful, you can start using your device.
4. The APP creates a QR code and make the camera scan the camera scan the QR code horizontally (20-30cm).

Why is my smart socket offline?

If your device is showing offline within the CE Smart App, it means it has lost network connection.When both 2.4 and 5GHz bands have the same SSID (network name), the router will steer between the bands causing the device to lose connection when the router jumps from the 2.4GHz to 5GHz (and thus, show offline).

How do you reset a curtain switch?

Pair and clear up the RF code
Press the switch button for 6 times,and hold on the 6th time,then release until the blue indicator on the switch flashes fast. Pair/Reset is successful.

How do I reset my Smart switch?

To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.

How do I get my smart camera back online?

Unplug the camera from the power source, and plug it back in. Wait up to 5 minutes for the camera to restart.

How do you reset a direct light Smart Strip?

Factory Reset Smart Light Strips (Bluetooth + Direct Connect) If you purchased a Bluetooth Light Strip in 2020 or a new Direct Connect Light Strip (released in 2020), you will have a factory reset button on the strip. Press and hold the button for 10+ seconds to reset.

How do you reset LED Strip Lights?

Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds. If done successfully, the light strip will flash five times then cycle through the colors blue, green and red.

How do you connect Tuya LED lights to Alexa?

Link Tuya Smart account to Alexa

1. Tap “Skills&Games” in the hamburger menu, then search “Tuya Smart”. Select “Tuya Smart” and tap “ENABLE” to enable the Skill.
2. You will be redirected to the account link page.
3. Link with Verification Code, open Tuya Smart App, click”Me–More Services–Alexa”.

How do I update my Tuya app?

Procedure

1. Log in to the Tuya IoT Platform.
2. In the left-side navigation bar, choose Product > Device >Firmware Update.
3. Select a product for update and its firmware.
4. Click New Update Deployment to set related update rules.
5. After completing the configuration, click OK.

How do you use the Tuya app?

Log in with the app account or third-party account
If an account of Tuya Smart has been registered, tap Log In to go to the login page. The State/Region field value is automatically specified and can also be manually changed. Enter the registered mobile phone number or email address and the password and tap Log In.

Is Tuya the same as smart life?

Tuya Smart App and Smart Life App are both official Tuya App. The only difference between the two is that the Tuya Smart App uses the Tuya logo and elements, while the Smart Life App removes all Tuya logo and elements.

Is Tuya a Chinese?

From rooftop to basement and the bedrooms in between, much of the technology making consumer products smart comes from a little-known Chinese firm, Tuya Inc. of Hangzhou.Global retailers Amazon, Target and Walmart sell consumer products that use Tuya’s technology.

Who owns Tuya Inc?

Tencent Holdings Ltd.
Tuya Inc., a Chinese software company backed by New Enterprise Associates and Tencent Holdings Ltd., raised $915 million in a U.S. initial public offering priced above its marketed range.