Turn the bolt or screw at the front edge of the center support bracket counterclockwise, if your rod has one. This releases the rod from the support. You may need a flat or Phillips screwdriver, or the bolt may turn by hand.
https://www.youtube.com/watch?v=w58j6x2VtFQ
Are curtain rod finials removable?
Are curtain rod finials interchangeable? Absolutely. If you feel like changing things up, finials are easily removable. Don’t forget to use our handy tips above to help you find another perfect set of finials for your curtains!
How do you disassemble a curtain rod?
How to Remove Mounted Drapery Rods
- Step 1 – Remove the Drapery. Remove the drapery before you attempt to remove the rod to save the rod from undue stress.
- Step 2 – Remove the Finials.
- Step 3 – Slide Out the Drapery Rod.
- Step 4 – Unscrew the Hardware.
- Step 5 – Patch.
How do you shorten a metal curtain rod?
Most hollow core metal drapery rods can be cut using a hacksaw with a fine cutting blade. Or, as long as you have a fine metal blade, you can use a powered miter saw. Make sure to buy metal curtain rods that are hollow core if you plan to cut them to size yourself.
What is the thing at the end of a curtain rod called?
Finials
Finials are the decorative end pieces that fit into the ends of the drapery rod to give it a finished, ornamental look. Finials are available in many styles and finishes to coordinate with the style of your room.
How do you remove a fixed shower curtain rod?
Insert a flat head screwdriver behind the exposed flat portion of the drywall anchors and pry outward to remove them. If they do not come loose, simply place the tip of the screwdriver into the center of the anchors and tap the screwdriver with a hammer to force the anchor inside the wall cavity.
Can metal curtain rods be cut?
Metal curtain poles can be cut with a hacksaw, or for a totally square cut, use one of our special curtain pole cutters. Wooden curtain poles can be cut with a fine tooth wood saw. Helpful Hint: Always remember that when you are cutting a curtain pole that is in two pieces you must trim equal amounts from each side.
Are finials a standard size?
Finial sizes vary greatly. A finial can have a length as small as 1.5 inches or as long as 9 inches.
How do you get a screw out of a pole?
Slice a deep groove into the screw head with a cutting wheel and rotary tool. Make it wide enough to accommodate your largest flat-blade screwdriver. If you’ve stripped out the head, cut a new slot with a straight-groove rotary tool (photo 3). Then crank it out with a flat-blade screwdriver.
Can you use knobs as finials?
The finials themselves are made from cabinet knobs. The beauty of using cabinet knobs is there are a million different styles available so you can choose the exact look you want to match your room.And it just so happens, it is perfect for turning cabinet knobs into curtain finials.
What is a finial on a lamp?
Lamp finials set on top of a lamp harp and hold a washer fitter shade to the top of a lamp. Any specialty lamp shops often offer a variety of unique lamp finials. It is an easy way to change the look of a lamp or give it a little more flair. They are often decorative or ornamental but can also be plain.
What size finials do I need?
The finial base should always be large enough to fully cover the end of the rod, but not so large as to look out of place. Typically, you’ll want to choose a finial with a base which is just a bit larger than the rod size it will be used with.
How do you cut a shower curtain rod?
Place the coping saw blade directly on the marker line of the shower curtain rod. Keep the blade straight up and down to avoid making an angled cut. Place the blade end that is closest to your hand on the mark, and pull back on the saw to make your first cut. There will actually be a slight cut mark at this point.
How do you open curtain eyelet rings?
Open the rings by inserting a small flat head screwdriver into the notch on the ring and carefully ease apart.
Can you remove grommets from curtains?
If the fabric is stretchy, you can “pull” it away from the grommet, but the hole will be slightly larger, and that grommet you removed is NOT reusable. You will have to have new grommets for replacements.Put the two panels right sides together, then meaure out from the second grommet from the edge and cut.
Can acrylic curtain rods be cut?
If this is all sounding like a little too much work for you to put an acrylic curtain rod together, you can take a short cut and get your rods and hardware all ready to go {here}. You’ll pay a little more but it’s quick and easy to pull together and is high quality stuff!