How to Remove a Schlage Interchangeable Core Lock
- Insert the master control key into the Schlage interchangeable core lock. Insert the key fully up to the shoulder of the key.
- Turn the key clockwise 15 degrees or until the key stops.
- Pull the key away from the Schlage lock bringing the interchangeable core with the key.
Are Schlage cores interchangeable?
Based on a plug diameter smaller than the standard 1?2″, SFIC cores are completely interchangeable with Best, Falcon and other SFIC installations.
How do I remove interchangeable core?
Interchangeable cores are normally removed by inserting the control key then turning the key clockwise about 15 degrees. When the rotation stops, the core is ready for removal by pulling it out of the cylinder, knob, lever, etc. Without a control key, the core is completely locked.
How do you remove a Schlage core?
How to Remove a Schlage Interchangeable Core Lock
- Insert the master control key into the Schlage interchangeable core lock. Insert the key fully up to the shoulder of the key.
- Turn the key clockwise 15 degrees or until the key stops.
- Pull the key away from the Schlage lock bringing the interchangeable core with the key.
What is a core key?
An interchangeable core or IC is an adaptable locking key cylinder.Interchangeable cores can be extracted from one lock type (bored cylindrical lock, mortise lock, padlock and so forth) and then installed into another without requiring the removal or disassembly of any single component.
What is a Primus core?
Primus interchangeable core cylinders allow the immediate rekeying of a lock without the time and expense of repinning cylinders. The replacement core is installed or replaced with the use of a control key. Available in Brushed Chrome or Brushed Brass. Available with C or E Keyways.
What is a rim cylinder?
Rim cylinders are part of a Rim nightlatch system (often referred to as a Yale type lock ) found on wooden and timber doors, they are the outer part that you interact with on the outside to open the door with a key.Popular brands of Rim Cylinder include Yale, ERA, Mul-T-Lock, Eurospec, Union etc..
How do you get all Schlage locks keyed the same?
To get your locks re-keyed, visit your local locksmith to have them do it for you. Or, just ask the store you’re purchasing the locks from to re-key the lock to one you may already own. It’s a process that should only take a few minutes.
Will Home Depot rekey locks to match?
Home Depot will rekey locks such as Schlage, Kwikset, doorknobs, deadbolts, single and double cylinders for $5 to $15 per lock. If your local store does not offer the service, you may purchase a rekey kit or visit Lowe’s or Ace Hardware. Home Depot does not rekey car locks as they often require specialized technology.
How do you remove Schlage?
How to Remove Schlage Locks
- Pull the interior handle away from the exterior handle, and set the two handles aside.
- Insert a screwdriver into one of the holes in the latch mechanism.
- Remove the screws from the strike plate in the door jamb, and pull the strike plate away.
How does an interchangeable core work?
The basic premise of the interchangeable core system is that the core is secured into the lock housing (I. E. mortise/rim cylinder, lever, padlock, etc.) by a sleeve-based lug. A control key is specially cut key whose function is to operate the control shear line that is between the sleeve and the housing.
How do you cut a control key?
Keyboard shortcuts
- Copy: Ctrl+C.
- Cut: Ctrl+X.
- Paste: Ctrl+V.
Contents