There is a button right below where the stand connects to the monitor. You have to press that button and it comes right off. I’m including a pictures, hopefully it helps. This helped me as well with a newer model.
How do you remove the foot from an Acer monitor?
3 Replies
- lay monitor face down on 2″ layer of bubble wrap as cushion, with base hanging over the table.
- Firm but gentle squeeze to Hinge cover while pulling downward, plastic tabs go onto monitor back bottom to top, so remove by pulling down and out from top to bottom.
How do I lower the stand on my Acer monitor?
To adjust the height you’ll need to unlock it using a switch on the back of the monitor.
- Stand the monitor upright. Video of the Day.
- Face the back of the monitor and look for a lock switch at the base of the stand.
- Slide the lock to the right to allow the height to be adjusted.
Can you mount an Acer Predator monitor?
It’s good to have a few hands holding up the monitor when you try to mount it on your desk/wall plate and then you can focus on screwing it in place with the thumb screws without worrying about dropping it.
Assistance by Acer.
| Drivers & Manuals | Acer Answers |
|---|---|
| Get Product Information ( only) | Acer Support Videos |
Does Acer Predator have VESA mount?
Yes, the XB271HU monitor has VESA wall mount screw holes, 100mm x 100mm.
What is VESA support?
The VESA Interface Standard defines the distance in millimeters between the four mounting holes on the back of a TV (distance horizontally x distance vertically). VESA is a standard used for TV wall mounts and wall mounting systems, adapted by most TV brands.
What does Acer Predator x34 weigh?
| Weight Weight without stand in different measurement units. | 6.76 kg (kilograms) 14.9 lbs (pounds) |
|---|---|
| Weight with stand Weight with stand in different measurement units. | 9.71 kg (kilograms) 21.41 lbs (pounds) |
| Colors Information about the colors, in which the specific model is offered to the market. | Black |
How do I change the height of my Acer monitor?
After pressing the top of the monitor, push the lock button towards right, then you can adjust the height of the monitor.
How do I adjust the height on my Acer Predator monitor?
In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor. After pressing the top of the monitor then you can adjust the height of the monitor.
How do I rotate my Acer monitor stand?
The screen will tilt forward 5 degrees and backwards 15 degrees. The best way to do this is have one hand on the upper bezel and one on the bottom. Push back on the top edge as you pull forward on the bottom, to tilt it back.
How do you remove a VESA plate?
Remove the VESA plate from the VESA mount by pressing down on the plastic tab to release the lock. Pull the plate upward to remove. Place the monitor face down on a flat surface. Align the VESA plate holes with the holes on the back of the monitor.
How do you take apart an Acer monitor?
- Step 1 — Preparation. Unplug your monitor.
- Step 2 — Remove screws in IO panel. There are 3 Phillips screws in IO panel.
- Step 3 — Remove stand base.
- Step 4 — Remove stand stem.
- Step 5 — Remove tilting mechanism.
- Step 6 — Remove the monitor’s back.
- Step 7 — Disconnect control panel.
- Step 8 — Remove monitor’s plastic frame.
How do I take the stand off my Acer Nitro?
To remove the stand assembly, gently pull the cover in the downward direction. Hit ‘Like’ if you find the answer helpful! Click on ‘Yes’ if the comment answers your question! Carefully place the monitor face-down on a stable surface, gently pull the cover in the downward direction.
What does VESA 100×100 mean?
You can find out the VESA screw size yourself, by measuring the distance between the holes on the back of your TV. The distance in millimetres represents the VESA size, in other words: 100×100 VESA means a distance of 100 mm between each hole.
What does a VESA mount look like?
A VESA pattern refers to the configuration of the four mounting holes on the back of a flat panel TV or computer monitor. For example, in a 100 x 100 mm VESA pattern, the screw holes are arranged in a square 100 mm apart. Before you select a display mount, check the back of your display for the VESA mounting holes.
How do I know if my monitor is VESA?
To determine if your computer monitor complies with VESA standards, simply check the back. If it does comply, you should see the standard four-hole screw pattern in the back of your monitor. The most common pattern for the screw holes is either 75 x 75 mm or 100 x 100 mm, while larger monitors will be 200 x 100 mm.
Is the Acer Predator X34 4K?
No. 4K resolution is 3840×2160. The Acer Predator x34/x34p is a 34″ 3440×1440 resolution monitor… which is an ultrawide display with a different aspect ratio than 4K. While it’s less pixels, you get the “widescreen” display which is nice for movies, productivity, and gaming.
Who makes the Predator monitor?
Acer Predator X38
Acer’s Predator X38 is perhaps the pinnacle of gaming monitors. It is a 38-inch ultrawide curved display that sports a 3840 x 1600 resolution, a 175Hz refresh rate, G-Sync compatibility, and a 0.3ms response time.
How do I fix my monitor height?
Sit back in your chair at an angle of around 100-110 degrees (i.e. slight recline) and hold your right arm out horizontally, your middle finger should almost touch the center of the screen. From that starting position you can then make minor changes to screen height and angle to suit.
Can you adjust monitor height?
Consult with the manual for your LCD monitor or contact the manufacturer directly to learn how you can adjust the monitor’s height. In most cases, you will either be required to toggle a lock or press a button that allows you to freely adjust the height of the monitor.
Contents