How Do You Remove A Kwikset Deadbolt Keypad?

How do you take apart a Kwikset deadbolt?

1. Position in a way that you are facing the deadbolt from the inside part of your house.
2. Remove the thumb-turner latch.
3. Pry the plate using a flat screwdriver.
4. Unscrew the mounting screws.
5. Open the door and remove the screws of the latch mechanism.

How do I uninstall Kwikset Smartcode?

1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
2. Press Checkmark symbol once.
3. Press Lock symbol once.
4. Enter Mastercode.
5. Press Lock symbol once.
6. Enter user code to be deleted.
7. Press Lock symbol once.
8. Re-enter user code to be deleted.

How do you remove a Kwikset deadbolt keyed on both sides?

Tip. Cut around the perimeter on both sides of the deadbolt using a sharp utility knife to avoid peeling or damaging the door’s finish during lock removal. Have on hand both a flat-head and Phillip’s screwdriver to remove the deadbolt. Some locksets incorporate both types of screws.

How do you remove a code from a Kwikset lock 909?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do you remove the code on a Kwikset lock 913?

While the door is open, test the user code to make sure it no longer unlocks the door. 2 Press Lock button once. 4 Press Lock button once. 3 Enter user code to be deleted.

What is a drive-in collar for a Kwikset door knob?

The Kwikset Plainlatch Drive-In Collar is designed to be used on plainlatch applications that require a drive-in type latch. This collar is designed to be used in conjunction with a 6-way plainlatch core. MANUFACTURER: Kwikset Corporation.

What is a latch faceplate?

Faceplate. A metal plate on the edge of the door, next to the latch or deadbolt, the faceplate protects the lock from wear and tear. It may have rounded corners or be a circular drive-in faceplate. The shape of the faceplate used during installation depends on your door’s preparation.

How do I remove a code from Kwikset SmartCode 910?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do I change the code on my Kwikset lock?

How do I reset a code on my Powerbolt?

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do you clear the code on a Kwikset lock 910?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

What is the master code for Kwikset lock?

0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.