What is an ETC Ion?
Ion Xe from ETC provides complete control of conventional and moving lights, LEDs and media servers. It supports multiple users with partitioned parameter control and full backup, multiple playback faders and cue lists in a tracking, move-fade environment.
What is a submaster?
Definition of submaster
: a subordinate or assistant master usually : an assistant or deputy principal of a school.
How many control channels does the ETC EOS TI have?
Eos Ti has a maximum of 16,000 control channels, each of which represents one complete device on the network. These may be assigned to any number from 1 to 99,999. Each user may have a discrete workspace.
How does a lighting console work?
Lighting consoles use low-voltage control signal to tell the dimmers, LED’s and moving lights what to do. Most lighting consoles use a control protocol called DMX512, or DMX for short.Because of the DMX512 standard, all of these consoles are putting out the same type of signal.
How many total faders are available on the Ion XE 20?
The Ion Xe 20 features an onboard fader bank that includes 20 pageable faders and a built-in display.
What is a submaster video?
Submaster/Generics: A final version of your spot of your with graphics/text/legals removed. often submitted with the along master for spots going out for broadcast. Will be used if the spot is ever going to be reused in the future/rebroadcast in a new market with updated legals/offers.
What are submasters in lighting?
Submasters: A submaster is one or more channels, recorded at proportional levels, which are controlled as a single unit. Submasters are usually controlled by physical sliders; some consoles also allow the user to control them via the numeric keypad.
How do I create a sub group in Pro Tools?
Creating a sub group in Pro Tools (or basically any DAW system) Once selected, hold down shift and option keys (key translation: apply to all selected), THEN change the output of one of them to an unused audio bus in the system.
What is a wall sconce light?
A sconce, by definition, is typically a wall lighting fixture that is installed using the wall for support. Such lights are usually directed upwards and owe their existence to the pre-modern age, when fixtures like these were used to hold candles and torches.
What are the 4 parts of a theatrical lighting control system?
While the type of events may be very different, the lighting systems actually have a lot in common A modern stage lighting system consists of a few main parts- consoles, fixtures, distribution/dimming, and cabling. Whether a small or large system, these basic pieces make every lighting rig function.
How do you shut down etc ions?
The usual method is to navigate to the browser menu and select ‘Power Off Device’. In either case, a dialogue box will open and ask you to confirm. If you tap the power button again or click ‘OK’, the console will power down.
What is complete editing?
Comprehensive editing is what I like to call an “everything job,” because it includes all levels of editing needed to get your book to read the way it should.Comprehensive editing is appropriate for completed manuscripts that need heavy editing in addition to grammar editing and proofreading.
Who edit video is called?
A video editor is involved in video production and the post-production of film making.Video editors usually use non-linear editing software to accomplish the task of editing. A video editor is a technically inclined individual that makes creative video editing decisions.
What are 5 key terms that are associated with video editing?
The Most Common Video Editing Terms You Should Know
- 1) Aspect Ratio. Aspect ratio relates how the width and height of your video relate to each other.
- 2) B-roll.
- 3) Bit Rate (Data Rate)
- 4) Close Up.
- 5) Color Temperature.
- 6) Compositing.
- 7) Compression.
- 8) Crop Factor.
What are the basic steps for recording a cue into the board?
Recording a cue in Blind
Keystrokes: | Action: |
---|---|
1. Press [Blind]. | Selects Blind display mode Prompt reads: Select cue number To select cue type, press TYPE |
2. Press [2]. | Selects cue 2 |
3. Press [Channel] [1][3] [And] [1][5]. | Selects channels 13 and 15 Prompt reads: Select channel numbers |
Contents