What are the basic steps for recording a cue into the board?
Recording a cue in Blind
| Keystrokes: | Action: |
|---|---|
| 1. Press [Blind]. | Selects Blind display mode Prompt reads: Select cue number To select cue type, press TYPE |
| 2. Press [2]. | Selects cue 2 |
| 3. Press [Channel] [1][3] [And] [1][5]. | Selects channels 13 and 15 Prompt reads: Select channel numbers |
What is a cue in stage lighting?
A theatrical cue is the trigger for an action to be carried out at a specific time. It is generally associated with theatre and the film industry. They can be necessary for a lighting change or effect, a sound effect, or some sort of stage or set movement/change.
What does a submaster do on a lighting board?
The SubMasters can control different groups of lighting channels while the Grand Master adjusts the intensity of every channels as it leaves the lighting desk.
How do you record a cue on an ETC Element?
Recording A Cue
Step 1: Set the channel levels that you want in your look using the channel faders and/or keypad. Step 2: Press [Record] [Cue] input the cue number [Enter]. – For example: [Record] [Cue] [1] [0] [Enter] records your channels as Cue 10.
What does a cue-to-cue look like?
All actors can assume that a cue-to-cue will mean a lot of starting their lines or a scene and stopping, starting over, jumping ahead and skipping lines, a lot of standing around, moving around and waiting until the director wants you to do something or needs you to do something else.
How do you write a lighting cue for dance?
Number the remainder of your cues, and note the place in the music that each cue should occur (for example, Cue 2 1:32). For each cue, write in plain terms what you want. Write your cues in clear, unambiguous language. Use stage directions (i.e. stage left, stage right, downstage, upstage).
What do you mean by cue?
Definition of cue
1a : a signal (such as a word, phrase, or bit of stage business) to a performer to begin a specific speech or action That last line is your cue to exit the stage. b : something serving a comparable purpose : hint I’ll take that yawn as my cue to leave.
Who uses a cue sheet?
Cue sheets are the primary means by which performing rights organizations track the use of music in films and TV. Without cue sheets, it would be nearly impossible for such composers and publishers to be compensated for their work. An accurately filled out cue sheet is a log of all the music used in a production.
How do you make a sound cue sheet?
Cue sheets details should include:
- names of producers, director, distributor, main actors.
- production year.
- country of origin.
- project title / for a TV series: episode title and number.
- total duration of the production.
- total duration of all the music used.
- titles of the songs and compositions.
- the length of music.
What is a cue stack?
Cue Stacks keep track of the order of the cues and the options for how they are played back. A Cue Stack may have only one Cue associated with it or may have a whole list of Cues. When you record a Cue onto a Playback, MagicQ automatically generates a Cue Stack.
How do I record a submaster?
Note: Use Solo to record specific channels into the submaster (rather than the full stage look).
Using Except to record a submaster.
| Keystrokes: | Action: |
|---|---|
| 1. Press [Stage]. | Selects Stage display mode |
| 2. Select desired channels and set channel levels. |
What does DMX stand for lighting?
Digital Multiplex
DMX is an acronym for Digital Multiplex. It is the standard digital communication protocol that is used to remotely control intelligent lighting fixtures.
What is a channel on a light board?
Channel: A control path that allows the console to vary the output level of one or more dimmers or other devices.
How do you record a cue in Onyx?
The first is to press Record and then press the selection button of the desired cuelist playback. This will either be the topmost physcial button above a fader, or the on-screen indicator at the bottom of the ONYX interface. When you do this, the cue will be added to the end of the cuelist as the next whole number.
What does Rem Dim do?
Abbrev. for “Remainder Dim.” Used during focus or when setting levels, [ch] (or [Grp]) # [@] [%] [Rem Dim] forces all other non-zero channels to a level of zero. Depending on the console, often another press of [Rem Dim] reverses the action.
What happens in a dry tech rehearsal?
The dry tech is essentially a rehearsal without the performers. It is a period, usually lasting multiple hours, where each designer and department head runs his or her segment of the production. It is also a chance for the tech crew who will operate the equipment to become familiar with the flow of the performance.
Who receives a copy of the rehearsal report?
After rehearsal, the stage manager should check in with the director and record all the production notes that the director makes on the report. Rehearsal reports should be given to the heads of all departments and posted in a designated area for the production team as soon as possible.
Which production role calls the cues for lights actors and props?
Light Board Operator
Light board ops are in charge of all lighting once the show opens. During tech the op will enter the cues into the light board as the lighting designer cues the show.
How does theatrical lighting enhance a theatrical play or dance concert?
The basic aims in dance lighting are the same as for any lighting – selective visibility, indication of time and place if necessary, enhancement of scenery and costumes, conveying the general message of the piece, and so on.It’s up to the lighting designer to create a visual composition on the stage.
Why is there a need to have appropriate lighting in any dance performance or production?
Light provides a theatrical feel to the dance that most choreographers desire. Technical Director, is in charge of all equipment, instruments backstage and technical aspects of the performance, including hanging lights and building any sets.
Contents