How Do You Read A Liberty 110 Electric Meter?

For 2 rate Liberty 110 meters:

1. Press 9 on your keypad. You’ll see ‘IMP R01’ followed by a reading. This is usually your day (or peak) reading.
2. Press 9 again until you see ‘IMP R02’ followed by a reading. This is usually your night (or off-peak) reading.

How do you read the meter on a Liberty 110?

To get the Night and Day reading on a ‘Liberty 110’ smart meter, press 9 on the meter’s keypad. It’s only with the standard ‘Liberty 100’ smart meter that you need to press 6 if it’s Economy 7 (for Day and Night readings) and 9 to get the single rate reading.

How do you read a Liberty meter?

Press 9 on the keypad. VOLUME will appear on your smart meter screen. You’ll see 6 digits (e.g. 00123.4) followed by an ‘m3’ symbol at the bottom right of the screen. This figure is your latest reading – if you’re giving a reading to your energy provider, they only need the first 5 digits.

What button do I press to read my electric meter?

To read the meter:

1. press the middle button.
2. write down the number below ‘IMP’ from left to right.
3. ignore any zeroes at the beginning and any numbers after the decimal point.

How do I read my electric meter reading?

To read an electric dial meter correctly:

1. Read the dials from left to right.
2. If the pointer is between the two numbers, always take the lower number.
3. If the pointer is directly over a number, write down that one.

How do you read a smart meter with A and B button?

If your meter has A and B buttons under the screen

1. press the A button.
2. press the A button again until you see ‘METER INDEX’ and numbers followed by ‘M3’
3. write down the number from left to right.
4. ignore any zeroes at the beginning and any numbers after the decimal point.

How do you read a digital electric meter UK?

To read the meter:

1. Read the first 5 dials from left to right – ignore any red dials or dials marked 1/10.
2. If the pointer is between two numbers, write down the lower number – if it’s between 9 and 0, write down 9.
3. If the pointer is directly over a number, write down that number and underline it.

Is a Liberty 100 a smart meter?

Smart, flexible and future proof
Secure Meters has developed Liberty 100 single phase smart electricity meter to meet UK smart metering requirements. Liberty 100 has modular architecture for both WAN/HAN enabling multiple communications options to be deployed.

What is a secure Liberty 100 meter?

By Secure Meters. The Liberty 100 is a single phase smart electricity meter with modular communication hub options, inclusive of an Energy Service Interface (ESI).

How do you read a meter on a smart meter?

To get a reading from these smart meters:

1. Press 9 on the keypad.
2. A series of letters will appear: IMP KWH.
3. Then you’ll see 8 digits (e.g. 0012565.3) followed by kWh at the bottom right of the screen.
4. This is your read, so in this case your reading would be 12565.

What is the unit of meter reading?

The most common unit of measurement on the electricity meter is the kilowatt hour [kWh], which is equal to the amount of energy used by a load of one kilowatt over a period of one hour, or 3,600,000 joules.

Why does my electric meter have 3 readings?

Your meter may show you 3 readings – one will be your day reading, one your night reading and the final reading is a total reading. We’ll only need to take the day and night readings.

Which smart meter do I have?

The easiest way to tell is to look at your electricity meter. If the serial number starts with 19P, this indicates it’s a SMETS1 meter. If it starts with 19M, then this means it’s SMETS2.

What do the numbers on my electricity meter mean?

Economy 7 Meters
This means that you will need to take two different meter readings. One of these readings will be for your daytime energy use, the other will be for your night time use. Normally an economy 7 meter will have two separate displays.

How do you read a Liberty 112 meter?

How do I read my Secure smart meter?

1. Press 6 on the keypad four times.
2. You’ll see the letters “IMP R01” appear on the screen.
3. Wait a moment – then eight digits will appear, followed by “kWh” towards the bottom right of the screen.
4. Take the first 7 digits – this is your reading.

How do you read a smart meter first utility?

To get a reading from these smart meters:

1. Press 9 on the keypad until you se ‘VOLUME’ on the display.
2. Then you’ll see a row of digits (e.g. 00063.5) followed by M3 at the bottom right of the screen. This is your reading.
3. Ignore any digits after a decimal point if you have one.
4. The read in this example is 00063.

How do I top up my prepaid electricity meter?

How do I top up for the first time?

1. Put your key or card into the meter for at least a minute to activate it.
2. Top up your key or card at a convenient Payzone or Post Office.
3. Put the key or card into your meter. Electricity credit will transfer automatically.

What is my vend code?

You will find your vend code on any receipt, whether you receive it on paper, via text message or email. It may be anything between 20-60 digits long. If you have ignored notifications that your credit is low or if you wish to activate Emergency Credit early; press the ‘E-Credit’ button on the Payment screen.

How do you enter a code on a prepaid meter?

Go to your prepaid meter and enter the 20 digit code through the UIU Keyboard correctly on the LCD screen. If you enter the token correctly, the screen will display ? ACCEPT? which means that you have successfully recharged your prepaid meter.