How Do You Put A Kwikset Lock In Pairing Mode?

Pairing Your Lock With the Xfinity Home App On the Overview screen, tap the More icon, then tap Add a Device. On the Add a Device screen, tap the Kwikset model number you purchased. Tap Continue. You will be presented with tasks to complete before you can move forward with device pairing.

How do I put my Kwikset lock into pairing mode?

More videos on YouTube

1. Enter exclusion mode. Put your system into its Z-Wave exclusion mode.
2. Clear the lock. Bring the Kwikset Lock close to your panel or the Z-Wave controller.
3. Enter inclusion mode. Now that the lock has been cleared, you can begin the pairing process.
4. Pair the lock.

How do I connect my Kwikset to Bluetooth?

Ensure that Bluetooth is on, as indicated by a small icon on the upper right corner of the smart device screen. 3. Press and hold the Program button again until Kevo beeps (if sound is turned on). The Bluetooth symbol in the top right corner of the screen should blink while Kevo and smart device are communicating.

How do you make a Kwikset discoverable?

Press the “A” button in the upper left corner for ~10 seconds (the clearing process will be signaled with a beep). This will clear any previous pairings from the lock. Restart the “Add Lock” process within the Premis App, and you should be able to “find” your lock and complete the pairing process.

How do I pair my Kwikset lock with my phone?

For Android, select (+) sign (bottom right) on the main page, select “Pair A Device”. For iOS, select (+) sign (upper right) on the main page, select “Pair a Device”. Press the “Pair a Device” on the following page. Select the brand, then the product.

Why is my Kwikset lock not pairing?

My Lock Won’t Pair
Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red. See the Installation and Programming Guides section for button locations for your Lock model.

How do I use Smart Lock on my phone?

What is Smart Lock and how do I use it?

1. 1 Open the Settings app.
2. 2 Tap Lock screen.
3. 3 Tap Smart Lock. You will be asked to confirm your screen lock. Please note: to use Smart Lock you need to have a screen lock set up.
4. 4 Tap on the Smart Lock type that you want to use.

How do you unlock Kwikset lock in Halo?

The Halo deadbolt can be unlocked using the Kwikset app. From the outside, Halo can be unlocked via an access code or with a key. From the inside, Halo can be locked using the sleek turnpiece.

How do you change the code on a Kwikset Halo?

For Aura and Halo Series of Locks Using App

1. Open the Kwikset app.
2. Tap the Menu icon.
3. Select Account Settings.
4. Select Account.
5. Select Change Password.
6. You will be prompted to enter your old password, then the New Password fields must be filled out.

Why is my Kwikset lock flashing yellow?

Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.

How do I pair my Kwikset lock with vivint?

To add a thermostat, door lock, or module to your system, complete the following steps:

1. Go to your touchscreen panel and touch the home button.
2. Tap Services.
3. Tap the wrench icon.
4. Enter your 4-digit PIN.
5. Tap Add Devices.
6. At this point, go to the device you want to add (door lock, thermostats, light module, etc.).

How do I connect my smart door lock to WiFi?

Android

1. Open the August App and select the associated Home from your Keychain.
2. Select the gear icon to navigate to Lock Settings.
3. Select the associated device to open Lock Settings.
4. Scroll to the Utilities section and select Connect to Wi-Fi Network.
5. Select BEGIN WI-FI SETUP.

Does my Kwikset lock have Bluetooth?

Aura is a Bluetooth lock so you will need to be within Bluetooth range to control and manage the lock from your smartphone. Some features, such as sharing an existing access code, is available even if you’re not in Bluetooth range.

How do I connect my Kwikset halo lock to ring?

Before you begin, use the Kwikset app to set up your Kwikset Halo Lock.

1. Go to Brilliant Home Screen.
2. Tap “Add Device” on bottom tray.
3. Tap “Kwikset”
4. Follow the instructions on the screen to log into your Kwikset account.
5. Tap the Kwikset lock you’d like to add to Brilliant and follow the remaining screen setup instructions.

How do I pair my Kwikset 916?

1. Make sure the door is open. Press the Program button once.
2. Press checkmark symbol once.
3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
4. Press lock symbol once.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.