How Do You Pick A Kwikset Lock With A Bobby Pin?

Use the lock to bend the tip of your pin into a pick. Stick the pin into your lock roughly one centimeter. The flat side should be facing up. Push the rest of the pin to the left, bending the end of the pin slightly. It only needs to curl up a few millimeters.

How do you pick a Kwikset door lock?

How to Pick a Kwikset Door Lock in a Few Easy Steps

1. Step 1: Place the tension tool to the bottom part of the keyhole while applying some pressure.
2. Step 2: Insert the pick and push the pistons by moving the pick up and down.
3. Step 3: Push the next pistons until you open the door.

Is Kwikset easy to pick?

Even one of Kwikset’s most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick. Other videos criticizing Kwikset point out that the lock can be easily compromised using a specialized bypass tool used by locksmiths.

How do you pick a lock with a bobby pin without breaking it?

Take a separate bobby pin and bend the top 1/3 of the pin so that it forms a hook. Do not spread both sides of the bobby pin apart as you did with the pick. Instead, bend both sides of the bobby pin in the same direction. You’ll use the tension lever to actually turn the lock once you’ve picked it.

How do you open a Kwikset lock with a dead battery and no key?

Use a Key To Enter Your House
If you forget your access code, cannot seem to enter the correct digits, or the battery on your Kwikset lock dies, use the key that works with your Kwikset front door lock. The Kwikset will open immediately, and then you can swap out the batteries to get the system working again.

Are all Kwikset keys the same?

A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks).

What is better Kwikset or Schlage?

Also in the non-forced entry category, there is no doubt Schlage is better. With a better, more precise manufacturing process and 2 additional security pins than the Kwikset deadbolt, Schlage locks are significantly harder to pick, bump or compromise in non-destructive ways.

Can Kwikset keys be copied?

there is no cutting of key unless you wish to duplicate the keys that come in the kit. each kit will be unique, the chances of getting 2 identical kits are the same as buying two locks with identical keys.If you have any old keys that will fit Kwikset brand, you can rekey to any key.

Can you pick a lock with a fork?

Stick the fork into the latch hole and mark the prongs with a marker so you know how deep it is. Then clamp the fork by its prongs in a vice and line it up to the mark.Once you can fit the handle into the slot your fork lock is ready to use.

Can you pick a lock with a safety pin?

Picking locks with a safety pin is a useful trick to learn, especially if you lose keys quite easily.Use the tweezers to bend the point on the second safety pin to less then a 45-degree angle. Insert the first safety pin into the bottom of the lock. It will act as the tension wrench.

What to do if battery dies?

The battery pack is inside the door and batteries can only be replaced with the safe open. To access the override lock, there is usually a removable panel to the side of the keypad. Undoing this will uncover the lock for the key to be inserted. If you have lost the override key then you cannot open the safe.

What is the master code for Kwikset?

0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How many Kwikset key combinations are there?

Kwikset’s SC1 Keyway works with all standard SmartKey door locks and allows up to 100,000 key combinations.

Can I use any key with Kwikset SmartKey?

The Smartkey locks are only compatible with Kwikset factory-cut keys or locksmith-generated keys carefully cut to factory specs. If you try to set the Smartkey lock to a non-spec key (or even a poorly-made duplicate Kwikset key) you risk messing up the lock.

Who owns Kwikset locks?

Spectrum Brands Hardware
Kwikset is an American lock and lockset manufacturer owned by Spectrum Brands Hardware and Home Improvement Group (HHI), a Division of Spectrum Brands. Originally Gateway Manufacturing Company, Kwikset was founded in California in 1946 by Adolf Schoepe, and Karl Rhinehart.

Is Kwikset better than defiant?

Defiant is definitely making significant improvements along the years. Just a few years ago, it would have never performed better than a standard Kwikset lock. Adding 3 security pins and a drill resistant plate shows that defiant is going in the right direction, while staying the most inexpensive lock you can buy.

Is Kwikset a good door handle?

Best Overall: Kwikset Juno Keyed Entry Door Knob
The Kwikset 991 Juno is a no-nonsense lock with the highest grade of residential lock security (ANSI Grade 1) and a simple way to rekey the locks for security reasons or convenience. This combo set includes both the entry doorknob and a single cylinder deadbolt.

How do I use Kwikset alternate keys?

Insert the new Kwikset key all the way into the lock. Rotate the key 90° counterclockwise until you hear a definite click. Make sure that the key and lock are straight up and down. To ensure that the Smart Key lock is re-keyed successfully, keep the key in the lock and rotate it back again 90° clockwise.

How many times can you rekey Kwikset SmartKey?

How many times can I re-key my lock? Unlimited amount of times. All you need is the Smarkey Security tool.

Can Kwikset locks be rekeyed to any key?

You can rekey all of your locks to match an existing key when the locks all have the same keyway.So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other.

What are lock picking tools called?

A traditional pick set. From left to right: torsion wrench, “twist-flex” torsion wrench, offset diamond pick, ball pick, half-diamond pick, short hook, medium hook, saw (or “L”) rake, snake (or “C”) rake.