Yes, you can transfer any Wyze Service between devices.
- Tap Account, then Services.
- On the Cam Plus tab, tap on the device Cam Plus is currently on.
- Tap on the device you want Cam Plus to be transferred to.
- The your subscription preference will update automatically.
Can I unplug and move my WYZE camera?
If you unplug your camera then plug it in again in the same WiFi environment your camera will automatically reconnect to the WiFi network. You do not need to re-enter the WiFi information again.
How do I rearrange my WYZE camera?
To reorder or resort cameras in the group:
- On the Home screen, tap your group’s name.
- Tap on the Settings gear on the top right.
- Tap Cameras in Group.
- Tap and drag the three-lines icon next to each device to slide it up and down the list.
- Tap Save to confirm your changes.
What happens if you unplug WYZE camera?
The camera goes OFF along with the power outage. When the power is back the camera reloads, reconnect to WiFi and the video is back. Unless you plug it to an UPS for temporary outages.
How do I reconnect my WYZE camera after moving?
Basic Troubleshooting
- Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name.
- Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network.
- Power cycle your Wyze Cam.
- Force close the Wyze app, then open it again.
Can I move my WYZE camera to another room?
You certainly can move the camera to another room. As long as there is adequate wifi signal from the same wifi network in that room, it will reconnect automatically as soon as it is plugged back in. The cameras do not have a battery and must be connect to power full time.
Do you have to keep WYZE cam plugged in?
In addition to being powered through the Micro USB port, the Wyze Cam Outdoor has an internal battery that allows it to work without being plugged in.
How do you watch multiple Wyze cameras at once?
To create a group of devices:
- Tap Home, then the + plus sign on the top left.
- Tap Add Device Group.
- Select the product type you would like to group.
- Enter a name for the group at the top of the screen.
- Add a checkmark next to every device you want in the group.
- Tap Done on the top right.
How do I remove the Wyze camera from my SD card?
Yes, the button is the card itself. Push the card further in until you hear a little click, the release. The card will eject. The end of a larger size paper clip works well for this.
Why is Wyze location?
The location permissions necessary for Wyze Bulb and Plug setup are because iOS 13 won’t allow the Wyze app to see the SSID of those products during setup without the permissions enabled. We are looking into possibilities for geofencing in the future, though. Have you fixed the problem with your app.
What happens if you unplug a camera?
When your house, the cameras won’t record. When you are away from the home, the cameras record. They’ll still be working but not recording.
Why did my WYZE Cam stop recording events?
Make sure your motion detection is turned on. Tap on your camera in the Wyze app. Tap on the Settings gear on the top right, then Event Recording. Tap the toggle next to Detects motion so that it’s set to on.
How do I get my WYZE cameras back online?
Reboot your Wyze Base Station to reestablish the connection.
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
To set up your Wyze Cam or Wyze Cam Pan:
- In the Wyze app, tap Home, then tap + plus sign on the top left.
- Tap Add Device.
- Tap Cameras > Wyze Cam or Wyze Cam Pan.
- With your camera plugged into an outlet, tap Next in the app.
- Pull the base from your camera and single-press SETUP on the bottom of the camera.
How do I reset my WYZE camera?
With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.
How many Wyze cameras are in a Base Station?
You can connect up to 4 Wyze outdoor cameras per Base Station, and a wired Ethernet connection is required for installation. After initial set up, however, you have the option of either keeping the wired connection, or switching to a wireless Wi-Fi connection via the Wyze app.
Does the WYZE base station have to stay connected to the router?
Unlike other Wyze devices, the Wyze Base Station requires a wired connection to your router during setup. You will not be able to set up the Base Station without a router.
Can I travel with Wyze camera?
Travel Mode gives you the freedom to use your Wyze Cam Outdoor anywhere, even when you’re away from home. This feature lets you use the camera without an internet connection, and it can be enabled on the camera or Base Station.
How do I hide my WYZE camera?
Turn Your Wyze Cam Into a Spy Cam
Improve your home surveillance by turning your Wyze Cam into a spy cam with the Dropcessories Hidden Clock Case. By looking like a simple digital clock, no one would suspect it for a security camera. Our clock case hides your Wyze Cam without hampering any of its functionalities.
How long does it take to charge a WYZE outdoor camera?
4 hours
It’s an easy process, as it relies on the Base Station for network communication. Fully charge your Wyze Cam Outdoor before setting it up the first time. This can take up to 4 hours. Once fully charged the light will switch from flashing red to solid red.
Can you plug in Wyze Cam Outdoor?
This outdoor power adapter works with Wyze Cam v3 so that you can power yours anywhere. Compatible with Wyze Cam v3. IP67 Weather Resistant. Easy installation – simply plug it in.
Contents