How Do You Move An Ecobee Thermostat?

To transfer your Ecobee to a new owner, you will have to log in to the Ecobee app, thermostat, or web portal. Depending on which method you choose to transfer with, you will either have to remove the old user from the account, unregister the thermostat, or reset the registration process.

How do I change my ecobee location?

Open your preferred web browser and navigate to https://www.ecobee.com/home.

1. Enter your ecobee account credentials, then click Sign In.
2. Select Settings.
3. Select Location.
4. Type in your new address.
5. Select Save.

How do I remove ecobee from home?

You can easily delete a home on the ecobee app by going to Manage Homes, select the home you would like to delete and tap on Delete home. If the home you are deleting still has devices under it, the app will ask you to move these devices to an existing home.

How do I remove ecobee from wall?

To remove the ecobee backplate, carefully remove your thermostat from the backplate by putting your thumb and index finger on the backplate. Then, pull against the ecobee3 lite. Remove the screws from the backplate to remove it from the wall.

How do I remove ecobee owner?

Each Ecobee is registered through the Ecobee app on your smartphone device and can be transferred to other users for ownership. To change the owner of the Ecobee, you will have to go into the settings on the Ecobee thermostat and select reset to link your new account to the device.

Where does ecobee get outside temperature?

The thermostat finds the closest weather stations and then uses an algorithm to interpolate the data based on geography to derive weather for your (very specific) location.

Does ecobee show outside temp?

Not only is having the weather info accessible on the Ecobee efficient for your heating and cooling, but you can also see how the outside temperature affects the usage of your HVAC system.Start by going to Ecobee’s website and clicking on “Login” at the top.

How do I remove my Ecobee thermostat?

How do I unregister a thermostat and remove it from my account?

1. Sign into the ecobee app.
2. Select your Home and then select the thermostat you wish to unregister.
3. Select the Main Menu icon in the bottom left and then select Device Settings.
4. Select Remove Device.
5. On the confirmation menu, select Remove Device again.

How do I unregister my Nexia thermostat?

Remove and Re-Add The Thermostat To Nexia

1. To remove the thermostat from your Nexia account, tap the following buttons on your Nexia climate page: Climate > Menu > Settings > Unenroll.
2. On your thermostat, tap: Menu > Nexia > Unenroll.
3. Reconnect to Nexia.

How do I unlock my Ecobee thermostat?

Scroll down and tap on “Settings”. Select “Access Control”. Tap on “Enable Security Code”. Enter in a four-digit passcode that you want to use with the thermostat in order to unlock it.

Does an Ecobee thermostat have a battery?

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.However, those with McMansions take note: The sensors have a range of only 45 feet.

Does ecobee come with wall plate?

Don’t waste your money. The ecobee comes with this same plate. This wall plate for the Ecobee 4 is very well built.

How do I transfer my Ecobee account to a new owner?

No, ownership cannot be transferred. Alternatively, you can unregister each device from one account, and register it to the other.

How do I change the name of my Ecobee thermostat?

Go to ecobee.com and log in with the email and password registered to your ecobee account. Then go to SETTINGS > PREFERENCES > THERMOSTAT NAME. From the drop-down menu, select CUSTOM NAME.

How do I factory reset an Ecobee thermostat?

1 Factory Reset

1. From the Home screen, press Menu.
2. Select Settings.
3. Go to Reset.
4. Choose Reset All Settings then confirm your selection by pressing Yes.
5. Choose the reset option that suits your needs:
6. The ecobee thermostat will be reset to factory defaults.

What weather station does ecobee use?

CustomWeather
As of 7/22/2014, Ecobee uses CustomWeather (www.myforecast.com). Depending on where you live, they can be accurate or way off. I also live in an area with microclimates, and CustomWeather uses a weather station at a local airport (15 miles away). The reported outdoor conditions are frequently way off from reality.

How do I calibrate my ecobee thermostat?

To Configure Temperature Correction

1. Press Menu on the main screen.
2. Go to Settings.
3. Then go to Installation Settings.
4. Select Thresholds.
5. Then select Temperature Correction.
6. Adjust the temperature reading to fit your needs.

How does ecobee geofencing work?

Geofencing, or location-based triggering, uses your phone to detect when you’ve crossed a set boundary, and sends a corresponding signal to the iCloud servers.

What is Beestat io?

Beestat connects with your thermostat and provides you with useful charts and analytics so that you can make informed decisions and see how changes you make lower your energy footprint.

Can’t connect to my ecobee?

My ecobee is not connecting to ecobee servers

1. Try power-cycling the ecobee by removing it from the wall and leaving it off for two minutes.
2. After two minutes, place the ecobee back on the wall.
3. To reconnect to Wi-Fi, go to MAIN MENU > SETTINGS > WI-FI > NETWORK > SELECT WI-FI NETWORK.

How do I unregister my t6 thermostat?

Information

1. Login into the Honeywell Home app.
2. Tap on the thermostat’s name.
3. Tap on the settings wheel (top right corner).
4. Select “Thermostat Configuration”.
5. Select “Delete Thermostat” at the bottom.
6. A pop-up window will be displayed asking to confirm the deletion, select yes.