The size of a Night Latch is measured from the centre of the keyhole to the edge of the door where the night latch should finish.
What height should a night latch be?
Typically, a night latch mounts on the door 48 inches from the floor. Mark the desired height at the lock side of the door with a pencil.
What is the difference between a 40mm and 60mm Nightlatch?
A nightlatch is fitted on the internal side of a door and will help give the door more sturdiness when in a locked position.60mm is commonly used for conventional doors, whereas those using glass panel doors will often choose a 40mm back set.
How do you measure a wheel lock?
Your rim should have a stamping on it such as: 21 x 1.60, 18 x 2.15, or 19 x 2.15. The first number refers to the rim diameter, the second number is the internal width of the rim where the bead of the tire seats, and this number must match the number on your rim lock.
How do I measure my backset for night latch?
The backset on a night latch is the distance from the centre of the keyhole to the edge of your door, you will find most night latches will have a 60mm backset.
What is a night latch on a saddle?
How to Rig a Night latch: A night latch is a safety strap attached to a saddle to help the rider hold on and stay on a contrary horse. This contraption was used as part of old-time traditional cowboy bronc gear and can still come in handy.
Why is a night latch called a night latch?
A night latch (or night-latch or nightlatch) is lock that is fitted on the surface of a door; it is operated from the exterior side of the door by a key and from the interior (i.e. “secure”) side of the door by a knob.Historically, such locks were intended for use at night-time, hence the name.
What is night latch function?
The night latch holds the door closed with a latch which can often be deadlocked into position. The latch’s screw prevents the cam on the mortise cylinder from turning far enough to allow the key to be released from the core (or plug) while the handle is locked.
How do you measure for a new door lock?
Measure from the outside edge of the door (including furniture) to the centre of your door. This is dimension A and is called the External Size to Centre. Next, measure from the inside edge of your door (including furniture) to the centre of your door to find dimension B, the Internal Size to Centre.
How tight should a wheel lock be?
Getting them off a journey when you have a flat could leave you stranded, so they should be nipped up a bit more than finger tight. If the locking nut comes loose, the other wheel nuts should be fully tightened and Torqued.
Is it easy to change a Yale lock?
The easiest lock to change is what is commonly called the Yale lock. This lock is actually called a night latch and the whole assembly does not need to be changed as the internal working latch, barrel or cylinder, can be changed independently of the rest of the mechanism.
How do you fix a deadbolt that is stuck in a locked position?
Take a small hammer to the body surrounding the keyhole. Twist the key back and forth as you tap on the lock with your hammer. This might take a while as it’ll take the parts time to fall back into place and work to open the lock.
What is backset size on a lock?
The backset is the horizontal distance from the edge of a door to the centre of a lockset; thus, the distance a lockset is ‘set back’ from the edge of a door is called its backset. It’s usually 1 inches or 2 inches (or 44mm and 57mm).
How do I measure my backset?
Backset: A backset is the distance from the center of the cross bore, to the edge of the door. To determine the correct backset measurement for your door, you need to measure the distance from the edge of the door to the center of your cross bore.
What does 60mm backset mean?
‘Backset’ is the distance from the front of the lock to the centre of the spindle as shown here.Almost ALL domestic mortice locks and tubular latches are supplied with either a 44mm or 57mm backset length. These equate to case sizes of 2.1/2″ or 3″ in imperial measurements. Commercial (DIN) lockcases are 60mm backset.
What is auto deadlocking?
Auto deadlocking Night Latches are deadlocked automatically when the door is closed. The anti-thrust bolt is triggered as the door closes, deadlocking the door and ensuring the latch bolt cannot be slipped by a plastic card, ensuring a high level of security.
What is the difference between mortise and cylindrical locks?
Mortise locks are more secure and durable than cylindrical locks due to their interior components and construction.In a mortise lock you can unlock both the latch and deadbolt locks by turning only one lever, but in cylindrical locks you have to lock and unlock the deadbolt and the latch separately.
Are all door locks the same size?
In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify. Dummy sets have no latch and are surface-mounted so you can install a dummy set wherever you choose on the door.
What size is a standard door knob hole?
2 1/8"
Most interior doors are prepped with a single boor hole. The Bore hole is the large diameter hole where the door knob is mounted. The standard sized bore hole is 2 1/8″ in diameter.
Are all mortise locks the same size?
There are two sizes of mortice locks: 21/2 and 3. If you are installing a mortice lock to a door with a narrow frame, or any door for that matter, it’s very important to know what size lock you need.
Contents