To determine the optimal width of your curtain rod, you’ll need to measure the width of your window including the frame or trim. Take this measurement three times: once at the top, once at the center, and once near the bottom of your window. These measurements will most likely vary slightly.
How much wider Should a curtain rod be than the window?
Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.
How much should curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
What are standard curtain rod sizes?
Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.
How far should curtain pole be either side of window?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).
How do I measure curtains?
Measuring Curtains
Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
How wide should curtains be for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do you measure a corner curtain rod?
Measure from the outside edge of the outermost curtain bracket to the corner-side edge of the corner bracket on one window. Add 2 inches to this measurement and cut a curtain rod to this length. Measure the remaining window in the same way, and cut the rod for it.
How far should curtain rod extend from wall?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
Do you need a wooden batten for a curtain pole?
Usually no need for battens if you have a skilled curtain fitter using the correct fittings and a quality pole, even with heavy weight fabric and interlining.
How do I know what width curtains to buy?
You should choose the width that most closely matches the size of your track or pole. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How many curtains do I need for a 72 inch window?
2 panels
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.
How wide should curtains be for 48 inch window?
Curtain Width Guide
If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
How do you measure the diameter of a rod?
Measure the length (L, in cm)of the rod and use the formula, V = (pi)r^2*L. Find out r (radius in cm) and double it to get the diameter, cm.
How do you measure a corner window?
Measure the width of each window from the corner on the mounting surface (molding or wall) to the point you would like to cover. Width of each window from the corner on the mounting surface to the point you would like to cover.
Do curtains need to touch the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
Will no more nails hold curtain rail?
The curtains are heavy. If it’s a light pole and you want to attach it with No More Nails, you should be able to, but anything heavier should be fixed directly into the wall.
What is a wave curtain track?
Wave curtains are fitted to a slim, discreet curtain track so they are suitable for all standard sized windows. Because they have a relaxed fold, they help to create a contemporary look in any home. They work particularly well in large open-plan living rooms and kitchen-diners, although they look great anywhere.
Contents