Start from the inner edge of the frame on one side and measure across to the inner edge of the frame on the other. Complete this measurement three times as explained above. Use the smallest measurement as your window’s width. This will also serve as the width of your curtain rod.
How do you determine the diameter of a curtain rod?
Selecting the Right Size. Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
What are standard curtain rod sizes?
Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.
How do you measure for hanging curtain rods?
To determine the length of the rod, measure the width of your window and add eight to twelve inches. Each curtain panel should be at least as wide as your window.
How wide can a curtain rod be without support?
Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
What is the diameter of a shower curtain rod?
1-1/4 inch
Shower Rod – 1-1/4 inch diameter, 72 inches long, 18 gauge.
How do I measure curtains?
Measuring Curtains
Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
How do I keep my curtain rod from sagging in the middle?
10 Clever Ways to Fix a Sagging Curtain Rod at Home
- Realign the Support Brackets.
- Provide Extra Support Brackets.
- Insert Another Support Rod.
- Change Your Fabric Material.
- Reduce the Cotton’s Length.
- Use a Barrier to Protect Your Curtain.
- Get a More Durable Curtain Rod.
- Replace Your Support Brackets.
How long can a curtain rod be without a middle support?
A center bracket is needed in almost any length greater than 5 to 6 feet, if you want to avoid any sagging. However there are “C” rings that will go over the bracket so that the drapes/curtains can be pulled to one side (either side, in fact).
How much should a curtain pole overhang?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.
How do you measure for curtain fabric?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How do you read curtain measurements?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long.
What are C rings for curtains?
C-rings allow one-way draw curtains to be used on longer rods requiring a center support bracket(s). These rings are a great choice for covering large windows or sliding glass doors.
Will no more nails hold up a curtain rail?
DA. No More Nails is not bad but there is no glue in the world that will stick up curtain poles because the substrate will give even if the glue doesn’t.
Do I need a stud finder to hang curtains?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first. You will know if there is wood!
How far should a curtain rod extend past window?
Curtain rods should extend at least 3 to 6 inches past the window frame. Just as hanging curtains above the window frame makes the window appear taller, Bob Vila writes that extending the curtain rod past the window frame makes the window appear wider.
How far should curtain rods stick out from wall?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
How do I support a curtain rod?
Screwing directly into a stud is the most secure way to support your curtain rod and brackets. Use a stud finder to locate a stud above your window before trying other methods. If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets.
How do you measure fabric for rod pocket curtains?
How to Measure: Rod Pocket Curtains
- MEASURE LENGTH. Measure from the top of the curtain rod down to where you want the curtain to fall.
- MEASURE WIDTH. The curtain should measure double the width of the window for fullness.
- STYLING TIP. The length of your curtain is a matter of personal preference.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula:
- Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number).
- Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
Contents