How Do You Measure A Roller Blind Width?

What are standard roller blind widths?

The maximum fabric width most roller blind fabrics come in is 3000mm. (3 metres), So something like a standard sliding door is no problem for a roller blind to fit along the top. There is a new range of roller blind fabric that now spans 3200mm wide.

How do I know what size my blinds are?

Fortunately, you can get measurements in three simple steps:

1. Measure the inside of the window frame in three places for width: across the top, middle and bottom.
2. Measure for height: at the left, middle and right side.
3. Measure the depth of the window so you know how deep the blinds can be.

Does roller blind width include brackets?

For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.

How much space do you need for a roller blind?

Recess Fit
A window frame depth of 60mm is required for the blind to sit neatly. A minimum depth of 30mm is required, however this will result in the blind projecting from the recess. A small gap either side of the blind fabric is standard to allow for the chain drive control and brackets.

What are standard blind sizes?

If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches. However, window sizes and shapes can vary greatly, especially in older homes or homes with custom windows.

Do blinds have to fit exactly?

Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening.If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.

Are blinds measured width by height?

One of the most important steps is to measure both the height and width in 3 places – top, middle, and bottom.For Roller Shades, Solar Shades, Sheer Shades, or Vertical Blinds use the measurement from the top of the window. For all other styles, use the narrowest width measurement of the top, middle and bottom.

How do I measure for recess blinds?

For a front of recess fitting you need to measure at the front of the recess. Measure the width at the top, middle and bottom. Next measure the drop on the right, in the centre and on the left. Write down the smallest measurements, these are the sizes you will use to place an order.

How do you measure roller blinds UK?

Here’s how to do it:

1. Starting at the top, measure across the width of the window.
2. Then measure across the middle and the bottom of the window, adding 120mm to each figure.
3. Once you have your width, measure from the top of where your fitting will sit, to where you want it to drop.

How wide can horizontal blinds be?

The width of these blinds can be anywhere between 70” and 96”. It is sufficient for most windows. however, if you have windows that are larger then it is recommended to install a set of 2 or 3 blinds per headrail for better coverage and fit.

Can IKEA Roller Blinds be cut to size?

The furniture store Ikea sells blackout roller blinds that you can cut to fit in your window. To get the proper width, you’ll need to trim both the roller and the fabric of the blinds themselves.Measure your window twice before cutting so your blinds don’t turn out too narrow or too large.

How much smaller should blinds be than the window?

Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?

How do you make a blind fit?

Cutting down the slats

1. Align the slats so that they are even.
2. Using a clamp or rubber bands, secure the slats together into position.
3. Wrap the slats with masking tape to prevent chipping.
4. Measure where you want to cut and mark a line with your pencil.
5. Lay them on the saw and line up the blade where you need to cut.

How wide should blinds be compared to the window?

To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.

How much space do you need on each side of blinds?

Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.

Should blinds be flush with wall?

1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.

How do you install blinds that are too narrow?

If you have ordered blinds that are too narrow sometimes you can still mount them by installing them as a ceiling mount to the top of the window sill. Installation will be similar to an outside mount.

Do roller blinds go inside or outside the window?

Vertical, Venetian and roller blinds are the ideal blind styles that should be inside the recess.