After joining an existing PowerView Shade Network or creating a new one and pressing Get Started, you’ll see this screen. Press Discover Shades as directed. The Hub will automatically discover the PowerView shades that are installed and powered up. You’ll first see a progress window (left).
How do I pair my Hunter Douglas remote?
Press and hold the STOP button on the remote module. for approximately three seconds. NOTE: The Group Numbers (16) will flash to indicate that the remote module has been paired to the PowerView Shade Network. A duplicate remote will operate the same set of window coverings and GROUPS as the original remote.
How do I connect my Hunter Douglas hub to WIFI?
Open Menu > Select your Hub > Select the info button > Select Hub Wi-Fi Set Up and follow the wizard. Connect the power cable of the Hub to a power outlet . Watch out for the colour of the LED. Open the app and select Connect to Hub .
How do I make PowerView shade discoverable?
After joining an existing PowerView Shade Network or creating a new one and pressing Get Started, you’ll see this screen. Press Discover Shades as directed. The Hub will automatically discover the PowerView shades that are installed and powered up.
On all Hunter Douglas PowerView window coverings there is a manual button. On most types of blinds or shades the manual button is attached to the headrail of the shade. The exception is where the manual button is attached to a satellite eye. This is a button and receiver that is at the end of a wire.
How do I reset my Hunter Douglas blinds remote?
Remove the battery cover from the duplicate remote. 3. With a paperclip, press and hold the MASTER RESET button on the backup remote for approximately 10 seconds. The Indicator Light on the front of the remote starts flashing red.
Why is my Hunter Douglas remote not working?
Press and hold the STOP button on the remote for about six seconds or until the remote stops blinking. Perform a six-second calibration reset again, and allow the product to move through its limits and then stop.
How do I connect my PowerView shades to my hub?
Open the app and select Connect to Hub . The app will start looking for an available Hub. Make sure your mobile device and the PowerView® Hub are connected to the same home network. When your Hub has been discovered, select Set Up to start configuring the Hub.
How do I add shades to PowerView hub?
Start by pressing one of the shade icons. In this case, we’ll press Shade 1 under Designer Roller & Screen Shades. When you press a shade icon, you’ll come to this screen, where you can edit the shade name and assign it to a Room. You cannot operate shades using the PowerView App until they are assigned to a Room.
What is a Power View Hub?
The PowerView Hub connects to a Wi-Fi router, and communicates with Hunter Douglas window coverings that feature PowerView Automation. It stores user-defined data, such as Scene and Automation information, and provides control of window coverings from anywhere in the world using the RemoteConnect feature.
Why are my electric blinds beeping?
The motor beeping indicates that the battery is flat and needs to be charged, charge the blinds for 4/5 hours for a full charge.
How do you reset Hunter Douglas Silhouette blinds?
Unplug battery wand. Press the manual button for a few seconds, then plug the wand back in, then press and release the manual button. If the shade responds, no further action is needed. If shade does NOT respond, reset motor with a 6-second reset.
Contents