To enable this system mode, go to Main Menu > Settings > Installation Settings > Thresholds > Auto Heat/Cool and select Enable.
How do you set ecobee to cool?
1 Enable Auto Mode
- Press Menu on the main screen.
- Go to Settings.
- Then go to Installation Settings.
- Select Thresholds.
- Select Auto Heat/Cool.
- And choose Enable.
Why is my Ecobee thermostat not cooling?
Your ecobee thermostat is powered off or is frequently rebooting. Water leakages, puddles of water, or signs of moisture around the air conditioning unit. An overflowing or full condensate drain pan. Signs of water damage around the drain pan or condensate drain line.
What is ecobee cooling?
Heating/Cooling Ranges
You can configure your ecobee thermostat to only display a specific heat and/or cool set point range. This prevents users from selecting values outside the displayed range. On the thermostat:Select Heating range or Cooling range. Adjust the allowed upper and lower values.
How do I change the temperature on my ecobee?
From the Thermostat
- Select the Main Menu.
- Select Settings.
- Select Preferences.
- Select Heating Range or Cooling Range.
- Select the desired Heating range and Cooling range, then tap Save.
How do I cool Ecobee?
The cooling set point is blue while the heating set point is orange. To enable this system mode, go to Main Menu > Settings > Installation Settings > Thresholds > Auto Heat/Cool and select Enable.
What is 2 stages of cooling?
Two-stage cooling means the air conditioner or heat pump has a compressor with two levels of operation: high for hot summer days and low for milder days. Since the low setting is adequate to meet household-cooling demands 80% of the time, a two-stage unit runs for longer periods and produces more even temperatures.
Why is my ecobee not cooling my house?
The most common causes of the Ecobee not turning on you’re A/C are the Ecobee not being set to trigger it, an overfilled drain pan, or a clogged A/C drain line. Each of these has a DIY solution to resolve it.
Why is the ac not cooling?
Your Air Conditioner Won’t Turn On
If your air conditioner isn’t turning on, first check your unit outside to determine if the condenser is running. Make sure that the unit is plugged in and your thermostat is set properly.
What do I do if my AC isnt blowing cold air?
Try cleaning your air conditioner’s filter and the coils to see if improving the airflow fixes the problem. If there is ice buildup, you’ll need to run the unit with just the fan in order to melt it off. If that doesn’t get the unit blowing cold air again, it could be refrigerant levels are low (see below).
What is Stage 1 cooling?
A single stage heating or cooling system means your furnace or air conditioner has only one level of heat or cold output. Single stage thermostats are used to control single stage HVAC systemsthus, if you have a single stage heating and cooling system, your home needs a single stage thermostat.
How do you hold the temperature on Ecobee?
You can change your hold preference to hold for 2 hours, 4 hours, Until the Next Scheduled Activity, Until I Change It or Decide at the Time of Change. To do this, just tap MAIN MENU > SETTINGS > PREFERENCES > HOLD ACTION and make the changes you like.
How do I set the temperature on my Ecobee smart thermostat?
How to Access & Adjust Comfort Settings
- Wake up your ecobee Smart Thermostat, then tap Menu.
- Tap Comfort Settings.
- Select the Comfort Setting you wish to customize.
- Tap the temperature controls to open them.
- Adjust to the desired temperature, then tap Save.
What is AUX heat?
Auxiliary heat on your thermostat refers to your backup heating system within your heat pump, otherwise known as electric resistance heating. Your thermostat inside your house is actually what determines when the auxiliary heat gets turned on.Aux heat will turn off once your home reaches the thermostat set point.
What does AUX mean on Ecobee?
Aux Outdoor Temp Alert: This alert notifies you if the auxiliary heat is triggered on when the outdoor temperature exceeds the selected alert temperature setting. Low Temp Alert: To prevent home damage due to freezing, you can set a Low Temperature Alert. The low temperature range can be from 35 to 68°F (1.5 to 20°C).
What is AUX heat Ecobee?
The aux heat can be a natural gas furnace, electric resistance system, or heating unit based on oil. If the aux heat runs for a long time, your Ecobee thermostat is programmed to alert you since it can cost you a lot of extra money if your aux heat is expensive.
Is a 2 stage air conditioner worth it?
For those who are looking for something more efficient, two-stage and variable speed systems are worth considering. These units have fewer instances of cycling on and off, which allow you to enjoy: Lower energy bills. More effective humidity control.
What is 2 stage air conditioner?
Two-stage cooling refers to the type of compressor that’s in the outside condensing unit. This feature allows for two levels of operation depending on your cooling needs full capacity on hot summer days or part capacity for milder days.
Why does my ecobee keep blowing cold air?
Check Your ecobee Wiring
As smart as your ecobee is, if you’ve got the wrong wiring, your hot air settings could blow cold air instead. The best way to ensure that your ecobee is wired properly is to make sure a professional handles the job.
How do I turn on the fan on my ecobee?
3. Quick Changes
- Tap the Quick Changes menu icon (the gear icon with 3 lines on the bottom of the thermostat screen)
- Tap the Fan Hold button.
- Using the horizontal dial, select a preferred time duration for the fan to run in ON mode.
- Tap the < in the top left to leave the menu.
- Exit the Quick Changes menu.
Why will my air conditioner not turn on?
If your AC unit won’t turn on, the first thing you should check is if there was a blown fuse or a tripped breaker. There’s a good chance that the problem is a tripped breaker if the circuit was overloaded.However, it is also possible that a power surge caused your air conditioner to blow a fuse or trip a breaker.
Contents