Proper care and maintenance of your microscope can extend its life by many years.
- Tip 1: Handle with care.
- Tip 2: Keep lenses clear of slides.
- Tip3: Clean after using immersion oil.
- Tip 4: Cover when not in use.
- Tip 5: Look after the bulb.
- Tip 6: Store in a clean, dry place.
What is maintenance and care of microscope?
Maintenance tips
When cleaning the microscope, use distilled water or lens cleaner. Avoid using other chemicals or solvents, as they may be corrosive to the rubber or lens mounts. After using immersion oil, clean off any residue immediately. Avoid rotating the 40× objective through immersion oil.
Why do we need to care and maintain a microscope?
Lens and Objective Care – Microscope lenses are very fragile and need to be handled with care to prevent scratches. Never let your lens touch the microscope slide and never touch any of the lens with your fingers. Microscope lenses are difficult to clean and proper care is very important.
How do you clean and service a microscope?
Microscope maintenance summary
It is better to cover the microscope when not in use. General cleaning: Remove dust from the eyepieces using lens tissues, paint brush or air. Remove dust from the microscope body using a duster and always cover when not in use.
How do you clean a microscope?
Put a small amount of lens cleaning fluid or cleaning mixture on the tip of the lens paper. We recommend 70% ethanol because it can effectively and safely clean and disinfect the surface. Larger surfaces, such as a glass plate, may be too large to wipe using this technique.
How do you maintain a compound microscope?
Storage
- Always cover the microscope with the supplied dust cover when not in use.
- Store in a dry place.
- In humid or moist environments, it is advisable to store the microscope in a waterproof container with a drying agent.
- Do not touch the optical lens with bare fingers.
- Do not store the microscope in direct sunlight.
How do you clean microscope slides?
When slides get soiled, you can clean them with soapy water or isopropyl alcohol. Do not immerse slides in water or soak them in it. This loosens the cover glass adhesive, causing the cover glass to come off and possibly ruin the slide.
What are the cleaning materials that are needed for proper care of the microscope?
Keep area clean
Keep the stage clean with lens paper to remove dust and particles, you can use a little alcohol to remove oil and other dirt if needed. A small soft brush or canned air can be used to dust off the microscope – use carefully. Do not prepare or stain samples next to the microscope.
When maintaining the microscope what is used to clean the lenses?
Dampen a cotton swab with 1 to 2 drops of lens cleaning solution. A cotton swab will help you clean the surface of a concave lens, which curves inward. Be sure to use a lens cleaning solution, or a solvent like acetone or xylol. If you’re using a solvent like acetone, take care not to get it on any plastic parts.
Why should you keep water away from the microscope?
Keep the stage dry at all times. Fluids can damage metal parts and also make it difficult to move a slide around on the stage. 3. The light source is housed in the base of the microscope.
How do you clean and dry slides on a microscope?
Most recent answer
- degrease and clean slides in Windex by placing n coplin jars.
- transfer to 95% isoporpanol (or ethanol) in coplin jars and then wipe clean. in some instances I add a third step.
- rinse in white vinegar – the acid etches the glass surface slightly – wipe dry.
- store slides in a dust free slide box.
Do you reuse microscope slides?
Do not re-use or recycle glass slides. Discard chipped or scratched slides. When using cleaned slides, use those that were cleaned the earliest and not those that were cleaned most recently.
When maintaining the microscope what is used to clean the lens oil or water or alcohol or detergent?
Explanation: It can be removed with lens paper dipped in a weak ammonia solution (one dropper full of household ammonia in 1/2 cup water).
How do you clean the lenses of your microscope quizlet?
Terms in this set (13)
- turn the light control all the way down.
- turn the microscope off.
- rotate the nosepiece to the 4x objective.
- drop the stage all the way down using the coarse focus knob.
- remove your microscope slide from the stage.
- using a dry piece of lens paper, wipe the 40x objective first in a circular motion.
Do microscopes require maintenance?
Clean the parts of the microscope with a clean cloth. Clean the objectives after each day’s work. Ensure that immersion oil residues are removed. Do not clean any part of the microscope with xylene, which will damage the microscope and is toxic.
Why do you clean and dry the slide and cover slip?
It is a good idea to clean twice the amount of coverslips as slides because they are easily broken. 3. Fill both slide and coverslip holders with 2% micro90 solution so that slides are covered. 4.
Contents