If you have a gas furnace, here are the steps on how to light a pilot light.
- First, locate the pilot valve on the furnace.
- Find the gas valve and turn it to the “off” position.
- Turn the valve to the pilot position.
- Press and hold the reset button.
- If the reset button fails, ignite the lighter.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How do you light a pilot light on a furnace?
How Can I Restart My Pilot Light?
- Step 1: Turn off your furnace.
- Step 2: Locate your gas valve.
- Step 3: Hold down the red button.
- Step 4: Light the pilot light.
- Step 5: Let go of the button.
- Step 6: Turn your gas back on.
- Step 7: Turn your furnace back on.
What do you do when your pilot light goes out?
If possible, shut off the main gas supply valve by turning it clockwise (to the right). Once at a safe distance, report the potential gas leak to your propane dealer or 911. Do not return to the building until a qualified service technician or EMT says that the building and gas system are safe.
How do you reignite a pilot light on a gas fireplace?
Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it. The pilot should stay lit, but if it doesn’t, relight it and hold the button a little longer. Turn the button to the On position, then replace the fixed glass assembly and the decorative cover. You’re done!
How much does it cost to relight a pilot light?
The Cost of Relighting the Pilot Light
A plumber can help reignite the pilot light. They will charge you an hourly fee of $40 to $150. This is usually a fairly brief project, and may just take an hour.
Does gas still flow when pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
Do you smell gas when pilot light goes?
Pilot light safety is important to prevent fire or poisoning from natural gas the pilot burns.If you smell the rotten egg odor of escaping gas, check to see if the pilot light is extinguished. If it is not, turn the gas valve to the off position and call your gas company.
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
Why won’t the pilot light come on?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Why is my pilot light not staying lit on my furnace?
Some common causes include issues with the thermocouple and pilot tube. The thermocouple detects the pilot light via sensors.A dirty pilot tube can also prevent the pilot from staying lit. If the pilot tube is dirty, let the furnace cool down and turn off the gas.
How do I know if my pilot light is out?
How to Tell If the Pilot Light Is Out
- Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
- If your pilot light is on, it should be easy to see your eyes will be drawn to the little flame.
- If you don’t see a flame, your pilot light is out.
- If there is a flame, check the color.
How do you fix a gas fire that keeps going out?
Easy DIY Fix: Gas Fireplace Won’t Stay Lit
- Before You Begin: Is Your Pilot Light Lit Inside Fireplace?
- The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit.
- Check Your Thermopile Output with the TH/TP Contacts.
- Don’t Replace Your Thermopile or Thermocouple Right Away.
- Cleaning the Thermopile.
- Re-test the Cleaned Thermopile.
Why won’t my pilot light stay lit on my gas fireplace?
If the pilot light on your gas fireplace won’t stay lit, a very likely culprit is a component called a thermocouple. A thermocouple is a safety device and is a component of the ignition system.The thermocouple is a metal rod that sticks out right in front of the pilot itself. It senses if flame is present or not.
Where is the pilot switch in my fireplace?
Locate the black knob on the left side (marked on/off/pilot). Push this button in and rotate counter-clockwise until the word Pilot lines up with the corresponding arrow.
Can you manually light a gas fireplace with electronic ignition?
Re-lighting pilot lights is straightforward on today’s modern gas fireplaces. If you have an electronic ignition unit, using your remote control simply press the ‘on’ button and the pilot will re-ignite within a few seconds, followed by the fireplace a few seconds after that.
Will gas company relight pilot?
Absolutely! We can send a gas service technician to light your pilot, and conduct a gas safety check of your gas fireplace or any other gas appliance to ensure your safety.
Who do you call to relight a pilot light?
Keep reading for the steps to follow in relighting pilot lights in a gas furnace, water heater, oven, or stove. One caveat, however: If you detect the strong smell of natural gas, do not attempt to light the pilot. Instead, leave the house and call your local gas company or 911.
Should I turn off pilot light in summer?
A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.
What Colour should a pilot light flame be?
blue
The color of the pilot light should be blue because that means that only natural gaswithout any other condensatesis reaching the pilot light through the gas main. The principal chemical compound found in natural gas is methane, and methane burns blue.
What should you not do if you smell gas in the kitchen?
What Not to Do if You Smell Gas
- DO NOT enter the premises if you notice a strong gas odor or if there is other evidence of a natural gas leak.
- DO NOT smoke, or make a spark or flame.
- DO NOT turn on any electrical switches, appliances or lights as an electrical charge could create a spark.
Contents