Locate your water meter and check the leak indicator to see if it is moving. Depending on the brand of your meter, the leak indicator could be a small triangular shaped dial or a small silver wheel that rotates when water is flowing through the meter. If the dial is moving, chances are, you have a leak.
How do I find a water leak in my house meter?
How To Check For Leaks?
- Shut off the main water valve to your house.
- Locate your water meter and lift the cover to see the meter dial.
- Use a piece of tape or a grease pencil to mark the location of the sweep hand.
- Wait 20-30 minutes and check the sweep hand location again.
Can a water meter leak?
This depends on where the leak is located. Look at the water meter on your property. If the leak is located anywhere between the plumbers elbow and your property then it is your responsibility. If the leak is located anywhere between the plumbers elbow and the roadside it is our responsibility.
What should water meter look like?
Most residential water meters are located near the curb or sidewalk at the front of the property in a concrete “box.” The water meter box will have a metal or plastic lid and may be marked, “Water Meter.”
How do I know if my water meter is bad?
The best way to check is to find a multi-galloned receptacle that you can fill up with an exact measurement. If you check the measurement of water with your water meter and the numbers don’t add up, you have yourself a faulty meter and that needs to be replaced as soon as possible.
How can I tell if I have a water leak in my digital meter?
On almost every meter, there is a “LEAK INDICATOR” it will be a small dial that moves with even the smallest of water flow. It is sometimes in the center of the sweep hand, or it may be off to the side. On electronic registers, it may be a flashing dot, animated icon, or something else that moves or blinks.
How do I know if my water meter is broken?
Check Flow Indicator: open the cover on the water meter at the street to see if it has a flow indicator. This is a small rotating wheel on the meter that can detect even small amounts of water flow. If the flow indicator is moving, you have a leak somewhere in your house or yard.
What is the red triangle on my water meter?
The small red triangle shaped piece on the dial is a low flow indicator that will rotate if there is any flow through the meter. It is useful when checking for leaks. To check for leaks, shut off all water flow in the house such as faucets, washing machines, etc.After the 2 hours read the water meter again.
What are the red digits on a water meter?
The numbers in the red boxes record tenths and hundredths of a cubic metre. Try to read the meter at the same day and time every week. This will allow you to accurately calculate how much water you are using.
How sensitive is a water meter?
Ultrasonic water meters are typically very accurate, with residential meters capable of measuring down to 0.01 gallons or 0.001 cubic feet.
Should there be water around my water meter?
If you open your meter box lid and you see standing water don’t be alarmed. It is not unusual to see standing water inside of a meter box. The cause for water inside a meter box can be due to several conditions. The most common cause of water to appear inside of the meter box is rain.
Does your water meter always move?
It should not move if you are not using any water inside or outside the home. Some meters also have a small pointer or dial known as the flow indicator. If the flow indicator is moving, you may have a leak.
What is the white triangle on a water meter?
Near or at the center of the meter display is a colored triangle or asterisk. This triangle or asterisk is sensitive to water flowing through the meter and can be used to detect leaks.
Can water meters give false readings?
Again, this is a common concern with water consumers when they get a high water bill. But the simple truth is that water meters never read inaccurately high. As mechanical meters wear out, they sometimes read low, and undercharge you; but they simply don’t read high.
How are water meters read?
The display alternates between the meter read and the flow rate. The meter read equals the gallons (or cubic feet) used while the flow rate equals the number of gallons (or cubic feet) per minute flowing through the water meter.
What are the black numbers on a water meter?
The numbers in black measure in units smaller than hundred cubic feet. The two black numbers on the dial are not used for billing purposes but are helpful in measuring smaller water usage or leaks.