How do I remove WYZE lock?
In the Wyze app, tap on the related Wyze Lock. Tap the gear icon to open your Settings.
On the Access Codes screen, you can:
- Change the Name and Access Time (Always, Recurring, Temporary, One Time).
- Reset the code.
- Revoke access by tapping Delete Guest.
How do you change the battery in a WYZE lock?
To replace the battery:
- Locate the Pin included in your Starter kit, or a similar thin, flat-edged tool.
- With the flat side of the tool, open the battery cover.
- Remove the old battery.
- Wait 20 seconds.
- Insert the new battery with the positive side ( + ) up and visible.
- Wait for the sensor status light to flash once.
How do you open a WYZE lock?
Auto-Unlock Set Up
Tap your Wyze Lock from the Home screen. Tap the gear-shaped icon to open Lock Settings. Tap Auto-Unlock. Tap on the Auto-Unlock toggle.
How difficult is it to install a smart lock?
When you’re setting up a new smarthome, one of the easiest gadgets you can add to your arsenal is a smart lock. It’s not much harder than changing a standard lock on your home.
What is a WYZE lock Gateway?
Wyze Lock Gateway is the communication hub for your Wyze Lock, and is necessary for it to talk to your network. If you run into any trouble with the setup process outlined on this page, check out Gateway setup troubleshooting for tips to get it working.
How long does WYZE Lock battery last?
The store page lists a 5-6 month battery life but after 6 months, I’ve already replaced them twice.
How do I set a pin on my WYZE keypad?
Keypad Setup Guide
- In the Wyze app, tap the Wyze Lock you’re setting up a Keypad for.
- Go to Settings by tapping the.
- Tap Keypad Settings > Add Keypad.
- Press and hold the Lock button on the Keypad until the light is flashing green.
- Tap Next in the Wyze app.
What batteries does WYZE lock take?
What’s in the box?
- 1x Wyze Lock.
- 1x Mounting Plate.
- 4x Lock Adapters.
- 4x AA Batteries.
- 1x Adhesive Strip.
What locks does the WYZE lock work with?
Works with most single cylinder deadbolts. We made Wyze Lock to work with most single cylinder deadboltsdeadbolts with a keyhole on only one side. Find out if your deadbolt works with Wyze Lock.
Is the WYZE lock waterproof?
Weatherproof. Wyze Lock Keypad is IPX5 weather-rated, which means it’s built to withstand the elements.
How do you calibrate a WYZE lock?
To calibrate your Wyze Lock:
- Open the Wyze app and tap Wyze Lock.
- Tap the gear.
- Scroll to the bottom of settings screen and tap Calibrate.
- Close your door and manually lock the deadbolt.
- Tap Next, and wait for your Wyze Lock to chime.
- Manually unlock the deadbolt and open the door as wide as possible.
Does the WYZE lock work with Google?
Wyze Lock now allows you to control your Wyze Lock via Google Home. Lock, unlock, and check on its status hands-free. Anyone speaking to a Google Home device will be able to unlock the Wyze Lock by voice, using the Google Home PIN* created in the Wyze Lock settings.
How many WYZE locks does a gateway have?
10 Wyze Locks
Mentioned in this article
The included Wyze Lock Gateway supports up to 10 Wyze Locks, and you can plug the wall wart-sized device plugs directly into a nearby AC outlet.
Can I replace my door knob with a deadbolt?
Yes, you can install a deadbolt in the doorknob location. If there is too much room between the door and jamb shimming can help but may require you to pull or cut the nails holding the jamb/door frame in place so you can shim it out further. You can also stack up several strike plates.
How much does it cost to install smart lock?
Cost to Install a Smart Lock
Smart Lock Costs | |
---|---|
National average cost | $200 |
Average range | $150 – $400 |
Minimum cost | $100 |
Maximum cost | $1,200 |
Are smart door locks worth it?
But even those still leave the homeowner vulnerable while on the threshold of their own home. For eliminating that moment, plus enhancing security in other ways, smart locks are worth the expense, no matter who you are.
How do you unlock a WYZE lock with Alexa?
To lock or unlock your Wyze Lock:
To enable unlock, go to the Amazon Alexa App > Device Settings > [Your Wyze Lock] > Settings. Once enabled, Amazon will ask you to confirm the change by having you to log into your Amazon account. Alexa will then require you to set up a 4-digit code.
How do I add a WYZE lock to Alexa?
Open the Alexa app on your phone or tablet and go to Skills to enable the Wyze skill. Follow the instructions on the screen to link your Wyze account to Alexa. You will need to enter your Wyze username and password, so have them handy. Select Add Device and your Wyze Lock will be added in your Alexa app.
How do I use WYZE lock with Google home?
Pair with Google Home
- Open the Google Home app.
- Tap the + icon in the top left corner of the home page.
- Tap Set up device > New devices > Search or scroll down to Wyze Home.
- Sign in to your Wyze account.
- The Choose device tab will appear, and your Wyze Lock icon and name will display.
Do I have to keep my Wyze camera plugged in?
In addition to being powered through the Micro USB port, the Wyze Cam Outdoor has an internal battery that allows it to work without being plugged in.
Contents