How does a tubular door latch work?
The tubular latch is usually a rectangular steel tube, which at its most simple contains a spring-loaded follower** and latchbolt or ‘tongue’ of triangular metal at the end, which retracts to open the door, and springs back to close or ‘latch’ the door and keep it closed.
How is a tubular latch measured?
An easy way to choose which latch you need is to measure from the edge of your door to the centre of your door Stile. Choose the Backset which is closest to this measurement, and the handle will be as central as possible to the Stile on your door.
Are tubular latches reversible?
Installing the Tubular Latch The Right Way Up
Arhictectural Tubular Latches have a reversible latch/catch to allow for fitting in both left and right hand opening doors.When installing your latch, keep it the right way up.
How do you rebate a pair of doors?
Simply slip the door pair maker between the gap where your two doors meet. The pair maker needs to be attached to the edge of one of the two doors. This then adds a lip to your door, creating a stop for the other door to close up to thus creating a rebated door pair.
How do you mark a door on a strike plate?
If you’ve ever installed a lockset or deadbolt on a door, you know how hard it is to accurately mark where the strike plate goes on the door jamb. The solution is to use a little lipstick. First, open the door and rub the lipstick onto the latch or deadbolt. Any color will do, but bright red works best.
What size do door latches come in?
Choosing Latches For Your Door Handles or Knobs
The most common size has a casing which is 63mm in depth and the distance to the middle of the square operating spindle is 44mm. This size of latch is used for the majority of lever handles on back plates, where the width of the back plate is about 40-45mm.
What is a flat latch?
A Flat Pattern latch allows a door to be kept closed and easily opened with the handle. Mortice latches are found on the majority of internal doors and have no locking mechanism. Our range includes flat latches in a variety of forend finishes.
What are the different types of door latches?
What Are The Different Types Of Door Locks And Door Latches?
- Tubular Latches. A tubular latch sometimes referred to as a mortice latch is used in conjunction with either a lever latch door handle, a lever on rose or a privacy door handle.
- Rollerbolt Latches.
- Sash Locks.
- Bathroom Locks.
- Dead Locks.
- Rim Locks and Rim Latches.
Are all door latches the same?
In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify.
What is the difference between a mortise lock and a tubular lock?
A tubular lock has its latch bolt and dead bolt in two separate holes. In a mortise lock, both bolts are encased in a steel box that fits in one hole.
What is a door latch?
Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.
Do door handles come with latches?
Are your handles supplied with locks / latches? No, all handles are supplied without locks / latches.
What is a door knob latch?
Latch. The latch is the mechanism that slides into the enge of the door and retracts or protrudes with the turn of the door knob. The latch keeps the door closed and when the knob is turned allows the door to open.
Can you use 2 single doors as double doors?
Door pair makers allow you to turn two single doors into a double door.
Should there be a gap between double doors?
Mind The Gap
Most door installers look for a gap in the middle of double doors between 3mm and 5mm that’s less than ? inch. This means the doors will swing correctly and there’s no risk of them hitting one another. Any gap between doors bigger than 5mm is too much and will look out of place.
Contents