How to Install
- Screw Double Brackets to the wall at required height.
- Loosen the screws underneath the brackets slightly.
- Insert the back track into the back section of each bracket and snap into place. Tighten the screws as you go.
- Repeat step 3 to fit the front track into front section of the bracket.
Can you join curtain tracks together?
Curtain tracks are fairly basic, available in plastic and metal, with corded and uncorded options. Some metal tracks are also available as extendable options, therefore if your window is on the larger size, you won’t need to buy two separate tracks and join them together.
Can you get double curtain rails?
Double curtain tracks allow you to hang two sets of curtains at the same window, one pair of main curtains on the front track and a second pair of curtains or a light weight sheer or voile on the rear curtain track.
How do you hang curtain rails without drilling?
5 Easy Ways to Hang Curtains Without Drilling
- Use 3M Command Hooks.
- Try Kwik-Hang Curtain Rod Brackets.
- Use Tension Rods.
- Get Creative With Coat Hooks.
- Try Magnetic Rods on Metal Doors.
Can you join 2 Curtain Poles together?
Some curtain rod manufacturers sell a curtain rod connector designed to fit inside the rod, allowing you to join two or more matching rods together to create one long piece. These inner tubes screw into place, requiring holes drilled at the ends of the curtain rod pieces to secure the entire structure together.
What do you call curtains that go on a track?
Pencil Pleat
They are widely used in all sectors and homes.Pencil pleat heading suits all types of pole or track and is often the most common type of heading used when hanging curtains under a pelmet.
How do you install layered curtains?
How to Layer Drapery Panels
- Install the curtain rod brackets into studs with the 2 included screws.
- Feed the sheer panel onto the smaller drapery rod.
- Place rod and sheers onto the back notch of the brackets.
- Unscrew the finial (decorative end piece) from one end of the rod.
What is a double track curtain rail?
Double curtain track systems are tracks that can hang multiple layers or pairs of curtains.Nowadays, they are increasingly being used to fit blackout curtains behind a layer of voile curtains.
What are double curtain poles for?
The double rod enables you to hang a sheer veil behind your standard curtain, helping to filter light and provide privacy. Extendable for an easy fit, the poles feature traditional finials.Includes brackets, finials, fittings and fixtures.
What is a wave curtain?
What is a wave curtain?Wave curtains use a modern alternative to a curtain heading, guiding the curtains along special wave curtain tracks to create a uniform, ripple effect. When pulled back, wave curtains avoid the bunched look that you get with regular curtain poles or tracks.
How do you hang curtains from ceiling tracks?
How To Hang Curtains From A Ceiling [5 Steps]
- Measure and mark your ceiling.
- Purchase curtains at the correct length for your project.
- Drill holes in the ceiling for anchor insertion.
- Install brackets or ceiling track.
- Hang the curtains with a curtain rod or hooks if using a ceiling track.
How do you hang curtains with track hooks?
For curtain tracks you will need to insert the hooks into the low or middle row of pockets so that the heading hides the track. For poles insert the hooks into the top row of pockets so that the curtain hangs below the pole. Just make sure you insert the hooks into the pockets rather than onto the cords!
How can I hang curtains without curtain rods?
For stationary curtains, it’s easy to hang them without a rod using upholstery tacks.
5 Creative Ways to Hang Curtains Without Rods
- upholstery tacks.
- tension cables.
- hook-eye screws and drapery pins.
- staples and furring strips.
- cabinet knobs.
What can I use in place of a curtain rod?
copper pipes
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
Can you hang curtains with Command hooks?
Be sure to wait the required hour to allow the adhesive to bond before hanging your curtains. You can see how wonderful hanging curtains with command hooks worked out! We lived in this home for two years and the command hooks held the curtains the entire time with no issue!
Can you connect tension rods?
Locate the point where the two sections of the tension rod fit together. Tension rods have two interlocking shafts with a strong spring inside. Place one hand on either side of the spot where the rods connect and twist counterclockwise to lengthen the tension rod or clockwise to shorten it.
How should curtains be hung?
How High to Hang Curtains. A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
When should you use a double curtain rod?
Although very similar in design to single curtain rods, a double curtain rod allows you to layer more than one drapery panel or curtain for a more enhanced and dramatic look. Most typically, people layer a sheer curtain first and then a regular curtain on top to block out light.
Can you layer curtains on one rod?
A single rod can be used to layer curtains with the help of curtain rings with clips. You can alternate, clipping one ring to the solid curtain and the next ring to a sheer panel behind it. Alternatively, you can align the solid and sheer panels and clip them together.
How do you use multiple curtain panels?
When making your choice, hold panels next to each other until you get the look you want.
- Layer Them. Install a double curtain rod, and hang the lightest-colored panel against the window and the darker one in front of it.
- Create a Pattern.
- Working With Two Panels.
- Different Colors on Windows in the Same Room.
Contents