How Do You Hang Curtains With Nails?

How do you hang curtains with tacks?

Simply add thumbtacks at the fold and overlap of the pleats at the top of the window. Use thumbtacks in the same color as your curtains to make them disappear. Space the thumbtacks evenly across the top of the curtain to avoid making them look haphazardly installed.

Can you hang curtain rods without drilling holes?

Dowels and Sticky Hooks
A slim wooden dowel is a beautifully understated way to hang curtains.And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.

How do you hang curtains without a rod?

For stationary curtains, it’s easy to hang them without a rod using upholstery tacks.
5 Creative Ways to Hang Curtains Without Rods

1. upholstery tacks.
2. tension cables.
3. hook-eye screws and drapery pins.
4. staples and furring strips.
5. cabinet knobs.

What are the different ways to hang curtains?

Rod pocket, eyelet and tab top are amongst the most popular ways to hang curtains.

1. Rod Pocket. The most basic heading is the rod pocket (also known as pole pocket) style.
2. Curtain rings. Using curtain rings is a popular choice.
3. Eyelet.
4. Tab Top.
5. Tie Top.
6. Pencil pleat.
7. Goblet pleat.
8. Pinch pleat.

How do you hang a curtain swag?

Start by hanging one end of the swag over one end of the rod. Then, hang the other end of the swag over the other end of the rod. Let the fabric in the middle drape down. When you’re finished, the draped fabric in the center should look like a regular curtain swag.

How can I hang my curtains in my apartment without drilling?

Renter-Friendly Window Treatments That Don’t Damage Walls

1. Use Temporary Command Hooks.
2. Hang Curtains With Tension Rods.
3. Order Custom Compression Shades.
4. Make a Faux Roman Shade.
5. Buy Twist & Fit Curtain Rods.
6. Suspend Curtain Rods from the Ceiling.

How can I hang curtains without studs?

If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets. Without a drywall anchor, a screw won’t be able to hold the weight of your curtain rod. You risk pulling the brackets out of the wall and causing further wall damage.

Can you install curtains with a screwdriver?

A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you’re ready to hang your curtain rod! It’s easiest to thread your curtains on the rod beforehand.

What is the easiest way to hang curtains?

5 Easy Ways to Hang Curtains Without Drilling

1. Use 3M Command Hooks.
2. Try Kwik-Hang Curtain Rod Brackets.
3. Use Tension Rods.
4. Get Creative With Coat Hooks.
5. Try Magnetic Rods on Metal Doors.

How do you cover a whole wall with curtains?

How to Use Curtains to Cover a Wall

1. Measure the length and width of the wall space you wish to cover, using a tape measure.
2. Choose your curtains.
3. Clear away the clutter against the wall you wish to cover.
4. Join 10-foot lengths of conduit with set-screw conduit couplings until your rod is the desired length.

What is the most popular way to hang curtains?

The most classic and common of all methods of hanging drapery, a rod pocket is a sewn-in pocket, or casing, at the top of a drapery panel that easily slips over a rod and conceals it. Drapery panels hung this way bunch nicely and have a simple, casual look.

How do I make my curtains look professional?

Rest easy — we’ve got you covered with our fool-proof curtain-hanging tips and information.

1. Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible.
2. Hang them wide.
3. Hang them in the right length.
4. Hang the right amount of panels.
5. Hang the right style of panel.

What type of curtains are in style for 2021?

The following curtain design trends take both form and function into consideration.

• Neutral Colours. When it comes to colour, neutrals reign supreme in 2021.
• Curtain Patterns.
• Airy Curtains.
• Linen Curtains.
• Silk Curtains.
• Blackout Curtains.
• Layered Curtains.
• Pom Tasselled Curtains.

How do you do the fishtail swag?

Lay your pressed fishtail swag on a flat work surface with the lining side up. Then fold accordion style. Each fold should be about 4 inches wide (as shown). You should end up with the patterned side down on the bottom fold and the patterned side up on the top fold.

How long should swag curtains be?

A general rule of thumb is that a swag 45-inches across the top edge requires about 2 yards of fabric. Online fabric calculators, or pattern envelopes, provide the exact amount of fabric required based on fabric type and pattern, mounting method, fabric width and swag measurements.

How do you hang a curtain and valance with one rod?

How to Hang a Swag Valance & a Curtain on a Single Rod

1. Shirr the curtain on the rod.
2. Create temporary folds in the swag valance, lengthwise, as if you were creating a paper fan.
3. Drape the swag valance over your arm, folding it in two.
4. Place the swag valance over the top of the rod and your curtain.

Do I need wall anchors for curtain rods?

You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver.Hang the curtains and double-check to make sure your brackets are still secure. Open and close to check that they’re functioning properly before finishing.

How do you hang curtains to make a room look bigger?

Hang the Curtains as High as Possible
In order to make your window and the whole wall seem higher, put the curtain rod as high above the window as possible. Attaching the rail close to the ceiling tricks the eye into believing the wall is bigger. Thus, it visually expands the whole room.

Should curtains cover the whole wall?

The drapes should cover as much of the wall as possible to create the illusion of space, so aim to position the rod a few inches from the ceiling.We used cream linen drapes, which were a similar color to the walls, to create a cohesive look.

What screws to hang curtains?

Insert a No. 8 plastic screw anchor into each hole. Each one should fit snugly enough to require a hammer to tap it flush to the wall. Replace the bracket and drive a 1 1/4-inch wood screw into each anchor with a screwdriver.