What is the difference between a spool and a reel?
Reel, as a verb, can be used to describe movement such as walking which is not in one’s control while spool, as a verb, in computer science, can be used to describe transfer of data from one device to a temporary storage for intention of sending it to peripheral device, such as printer.
What are dive reels used for?
Reels are essential tools for divers. They can be used to keep you in contact with surface support, guide you back to a known starting point, or to position you during search and retrieve operations.
How do I install surface marker buoy?
Open the bottom of the surface marker buoy and hold it above your regulator exhaust valve (where the bubbles come out when you exhale). Breathe out a few times until the buoy partially inflates and tugs upwards on your hands, but avoid adding so much air that you cannot maintain buoyancy.
What does diving marker look like?
Permanent surface markers are typically red and white to stand out against the water and to match the diver-down flag color. The marker can be round or torpedo-shaped, often with a ballast section that can hold some water to maintain stability.
How do fishing marker buoys work?
Using a marker buoy is as simple as its design. If you come across a structure on your depth finder, like a stump, ledge or area of dense cover, simply toss your marker buoy overboard to identify the spot. The anchor weight will drop to the bottom, holding the location as your buoy floats above the water.
What is diving buoy?
A surface marker buoy, SMB, dive float or simply a blob is a buoy used by scuba divers, at the end of a line from the diver, intended to indicate the diver’s position to people at the surface while the diver is underwater.
How do you store a samba reel?
To secure the spool use one end of the double ender through the loop of the string and then clip that to one of the holes on the side of the spool. This secures the spool and stops it from un winding. Clip the other end of the double ender to the SMB to keep them together.
Where do I put SMB on BCD?
Prepare Your SMB
Take out your SMB from where you stored it. Many people like to store their SMB and reel in a BC pocket. We prefer to have the reel clipped to a D-ring on the BCD, while attached to the BCD which is held on the side of the BCD in a bungee cord loop. It’s ready to go.
What is the hole in a spool called?
When the spool is sitting on it’s base, the overall width of the widest point (the base) is called the flange. The barrel is the name for the piece that the wire is wound around. Within the barrel is a hollow hole, which is called the arbor.
How big is a cable spool?
Spool Type
| Spool Type | A | Wire Diameter Range |
|---|---|---|
| DIN 500 | 36mm 1.400″ | 1.2 – 3.0mm .047″ – .118″ |
| SK 460 | 305mm 12.000″ | 0.25 – 1.8mm .010″ – .072″ |
| SK 255 | 216mm 8.500″ | 0.25 – 1.0mm .010″ – .040″ |
| Locking Reel | 16mm .630″ | 0.25 – 1.0mm .010″ – .040″ |
What kind of wood are wire spools made of?
Often made of birch or poplar ply, they are both strong and light-weight. In normal situations, plywood reels are used only once and then destroyed.
What is an SMB reel?
Diving reels are usually used for a secure connection between you (the diver) and a surface marker buoy (SMB). Other uses include exploration of wreck and cave dive spots, search and recovery safety lines and for general diver training.
What is a safety sausage diving?
A safety sausage is a buoy used when the diver is at the surface to indicate the diver’s position to the dive boat, reducing the risk of losing contact when air, light or sea conditions decrease the visibility of the divers from the boat.
What is a dive line?
A distance line, penetration line, cave line or guide line is an item of diving equipment used by scuba divers as a means of returning to a safe starting point in conditions of low visibility, water currents or where pilotage is difficult.
Where do you put SPG?
zip tie a clip to it on the neck of the gauge just below the head. “You must be the change you want to see in the world.”
What does diver down flag look like?
Divers Flag
This flag is red with a white diagonal stripe running from the top left to the bottom right corners. It is often used to alert other boaters to scuba diving and snorkelling in the ocean.
What’s the difference between SMB and Dsmb?
SMB = Surface Marker Buoy; DSMB = Delayed Surface Marker Buoy. Have a look at this picture. The difference is that a DSMB is always tied to a line, and deployed from depth, while an SMB may be deployed from the surface only. Basically, add some line to an SMB and it becomes a DSMB, so there is no basic difference.
What color is Dsmb?
SMB Specs
| Length | 1.0m (3.3′) |
|---|---|
| Colors Available | Orange, Hot Pink, Neon Yellow |
| Bottom Design | Closed Bottom |
| Inflation Method | LP Hose from tank, or oral |
| Deflation Method | Integrated over-pressure valve (OPV) |
What is the ABC pre dive check?
The pre-dive safety check ensures that your equipment is working, and also familiarizes you with your buddy’s equipment should you need to assist or receive assistance from him. It even lets you check if your buddy’s gear is working correctly, and if you’ve turned on your air supply.
Do I need an SMB?
In cases where divers do go missing, having more than one SMB to blow up and wave around on the surface of the water will greatly increase their chances of being found. This is why every diver should have an SMB in his BCD pocket when he dives — to use in case of an emergency.
Contents