Reverse Charging You can set a minimum input voltage on the charger, 15V for 4S and 23V for 6S, so it stops discharging automatically (at roughly 3.8V per cell). This is my go-to way to discharge full LiPo that I don’t fly on the day, it’s fast and hassle free, and no electricity is wasted.
How do you discharge lithium batteries?
The first and most reliable way to kill a lithium battery is simply to charge it too much. Charge it above 14.6V and rapid cell damage will occur. Resulting in a short circuit in the weakest cell, which then rapidly increases voltage across the other cells.
What rate should I discharge LiPo?
You don’t want to ever fully discharge a lipo (unlike a nimh), but it is recommended to discharge to ~ 3.7 to 3.9 Volts per cell for storage if they are fully charged and not ran. Or as mentioned charge them up to that level if you’ve ran them lower. Roughly 50% of capacity.
How do you fully discharge a LiPo battery?
LiPo Battery Disposal
- Discharge the LiPo battery as far down as you safely can. You can do this a number of ways.
- Place the LiPo in a salt water bath. Mix table salt into some warm (not hot) water.
- Check the voltage of the LiPo. If the voltage of the battery is 0.0V, great!
- Dispose of the battery in the trash.
What is the fastest way to discharge a lithium battery?
As SgtWookie noted, an incandescent bulb is a good way to discharge a battery since their resistance reduces as the voltage drops, tending to maintain the discharge current. Just use more lamps or a larger lamp to obtain a faster discharge.
How do you discharge A LiPo battery disposal?
# Salt Water
- Get a plastic container which you can afford to throw away, fill it with cold water.
- Mix it with salt and make sure it’s dissolved completely.
- Put the battery in the salty water, and leave it somewhere fire proof for two weeks.
- Finally, wrap the battery with paper and it’s ready to be thrown away.
Do you need to discharge LiPo batteries?
LiPo batteries also don’t develop memory or voltage depression characteristics like NiCd/NiHm batteries, and do not need to be discharged before being charged. But they’re not without their downside. Mishandling of these batteries can lead to fire, explosions and toxic smoke inhalation.
How fast does LiPo discharge?
At 150W, it can discharge most FPV drone batteries in a matter of minutes. With this discharger, you can either discharge the battery completely, or set a voltage to stop the discharge (e.g. 3.80-3.85V per cell for storage).
How far can you discharge a LiPo battery?
9. Never discharge a LiPo battery below 3.0v per cell. Ideally you never want to go below 3.2v per cell to maintain a healthy battery. 2.9v per cell and lower is causing permanent damage.
What is C rating on LiPo?
The C rating for a LiPo battery, quite simply, refers to the capacity of energy the battery can safely discharge, represented as a multiple of its overall capacity. A battery that has a higher C rating delivers more energy, and that means higher performance.
How do you discharge a LiPo to 0?
Plug your battery’s XT60/ XT30 Connector into discharger’s connector. Then LED will keep lighting until finishing discharge. 0V LED Light goes off, which points at battery discharge to 0V.
How do you discharge a battery pack?
The fastest way is shorting the battery, the best way is to not short the battery, but have a controlled discharge, like you are doing with the lamp. While I will suggest this, with the preface of exercising caution, you could connect a couple lamps together in parallel to reduce the resistance of the circuit.
How do you know if LiPo is damaged?
They include;
- Damaged plastic cell envelope or visible deformities on the package of the cell.
- The smell of leaking electrolyte.
- Unusually high internal resistance (IR).
- Dented corners.
- Puffing or swelling shows that the battery is damaged, and therefore you should discontinue discharging or charging immediately.
How do I keep my LiPo battery from swelling?
If you want to make your LiPo battery last and delay the onset of battery swelling, then here are our best tips:
- Use quality chargers.
- Don’t over-charge or over-discharge.
- Replace old batteries.
- Avoid mechanical damage.
- Don’t store in a hot location.
How many amps is a 6S LiPo?
For a 6S LiPo (22.2V), the same 100-watt charger will deliver 4.5 amps. This means that a 6S 4500mAh pack would have a 1C charging rate.
What voltage is a fully charged 3S LiPo?
Because the battery shown has a 3S arrangement, it is marked with its nominal voltage of 11.1V (3.70V*3 cells). A fully charged 3S pack is 12.60V and a fully discharged 3S pack is 9.00V.
Is it OK to use a puffed LiPo?
As long as it is very minor LiPo puffing & goes away after the pack cools down, it has been my experience that you can usually still safely use the pack and keep the swelling in check; likely not to its full discharge potential however.
How low can a 3S LiPo go?
For example for a 3S Lipo, the max voltage is 12.6V, and you should land when the voltage reaches 10.5V (at 3.5V per cell).
What is the difference between a 25C and 35C LiPo?
The 25C batteries will only be able to supply ~70% of the current as the original 35C. This means less power available and also less time before voltage sag is to great to fly. It has nothing to do with capacity but even still, expect reduced effective flight times.
What is discharge rate?
The discharge rate is defined as the steady current in amperes (A) that can be taken from a battery of defined capacity (Ah) over a defined period (h).
What does 30C LiPo mean?
20C is 60/20 or 3.0 minutes. 30C is 60/30 or 2.0 minutes. If your flights at 100% throttle are always longer than 3 minutes than a 20C battery is plenty. This is just another way to see what battery you really need.
Contents