How Do You Close Curtain Strings?

How to Close the Blinds With String

1. Gather both of the strings from the blinds in one hand.
2. Pull the strings diagonally to the left until the blinds rise slightly.
3. Loosen your grip on the string so that the blinds slide downward, making sure to hold the left-diagonal angle of the string the entire time.

How do you close a blind string?

To close the blinds, slightly loosen your grip on the string and allow it to rise back up toward the trigger motor. This motion will lower the slats, bringing them toward the bottom of the windowsill. Keep this motion slow, smooth, and steady to avoid entangling the slats or locking them.

How do you close blinds without a wand?

Gently pull the panels with your hand if they do not have a wand. If your panels do not come with a wand to pull them open and closed, you can gently slide them along the track with your hand. The slide should be smooth and involve little physical exertion.

Why do blinds have two strings?

If you have a top-down, bottom-up lift mechanism, your blinds probably have cords on either side. These blinds are different from the other types in that they allow you to adjust the height of both the top and the bottom of the blinds.Pulling on the right string will allow you to control the bottom of the shades.

How do you make blinds stay up?

The trick to remember is not to pull these straight down. If you wish to RAISE the blinds, move the bottom of the strings along the wall away from the window first (6-12 inches should work) and a ratchet mechansism will work keeping the blinds up as the they are pulled.

How do you close shutters?

Since each shutter panel is hinged into the shutter frame, each can swing open completely by just pulling on the panel, which allows it to swing open. Closing them is as simple as swinging each shutter panel back toward the window.

How do you close blinds with a pole?

Rotate the rod on the other side of the window to adjust the slats. If your set of blinds has adjustable slats, you can open and close these by twisting the rod hanging down from the top of the window. Just twist the rod to the right or left to move them.

How do you close blinds without strings?

Adding the cordless option removes the lift cords from the shades and makes the window shade operate without pulling a cord. Simply grasp the bottom rail of the blinds and lift to raise the window shades. To lower them from the top down grasp the top of the window shades and pull down.

How can I make my blinds close tighter?

Flip horizontal blinds upwards. Instead of closing blinds the traditional way, which would be pulling the front cord to make the blinds slant downward, turn the blinds up with the ridges facing the ceiling by pulling on the back cord. This will provide a tighter fit for the blinds and let in less light.

Why wont my blinds stay up?

The blind won’t stay up when locked in place. This is usually caused by a failed cord lock or crushed cord. To determine if the problem lies with the lock or the cord, do this: Try to raise your blind up just a few inches and lock it in place. If it locks, the problem lies with the cord.

Why do my horizontal blinds keep falling?

If your blind keeps falling down, the fault may lie in an incorrect installation. If the brackets are set too wide apart, the blind might be loose and can come down. You can easily correct the problem with a hammer.