It is recommended that you change it to a code of your own.
- Make sure the lock is unlocked and the door is open.
- Enter your Mastercode – for new install, default is 0-0-0-0.
- Press the lock button. You will hear one beep.
- Press 7.
- Press the lock button.
- Enter a new Mastercode.
- Press the lock button.
How do I change the access code on Kwikset Halo?
For Aura and Halo Series of Locks Using App
- Open the Kwikset app.
- Tap the Menu icon.
- Select Account Settings.
- Select Account.
- Select Change Password.
- You will be prompted to enter your old password, then the New Password fields must be filled out.
How do you reset the master code on a door lock?
Resetting your Combination Lock
- Open the lock using the previous combination.
- Insert the reset tool in the hole on the side of the lock.
- Push the reset tool in and turn 90° in either direction.
- Set wheels to your new combination.
- Turn and remove the reset tool.
- Record your combination in a safe place.
What is Kwikset default master code?
0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
How do you change the code on a SmartCode Kwikset?
To set a code for the second user, press the SmartCode Program button twice to program a security code for the second user, such as a relative. Enter a four to eight digit security code on the outside electronic lock keypad and press the Lock button again.
How do I reset my Kwikset SmartCode master code?
How to restore default settings on my SmartCode lever? Perform a factory reset
- Remove battery pack.
- Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
- Press the Program button once more.
How do I change the code on my Kwikset touch screen?
How to add a user code on my Smartcode touchscreen?
- Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
- Press Checkmark symbol once.
- Enter Mastercode.
How do you reset a Kwikset lock?
1 Factory Reset
- Open your door.
- Extend the latch bolt.
- Slide up the cover to open the back of your lock, exposing the buttons beneath.
- Push and hold the reset button for 10 seconds, until the lock beeps.
- The light ring will flash red, then spin amber.
- The lock has now been restored and is ready to be set up again.
Where is the Kwikset master code?
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.
How do you change the master code on a Kwikset 909?
Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.
- Keep door open.
- Press Lock button once.
- Enter Mastercode.
- Press Lock button once.
- Re-enter Mastercode.
- Press Lock button once.
How do you master key a Kwikset smart key?
First, insert the functioning key and turn it ?-turn clockwise. Then, insert and remove the SmartKey learn tool. Follow by removing the functioning key, inserting a new key, and turning it ?-turn counter-clockwise. Your lock is then successfully re-keyed.
How do I change the code on my Kwikset 955?
How to enable/disable programming code on my SmartCode 955?
- A programming code enables you to make changes without needing to access the programming button.
- Make sure the door is open.
- Press 3.
- Press Kwikset button.
- Enter a programming code.
- Press Kwikset button.
- Re-enter programming code.
How do I change the code on my Kwikset 910 lock?
How to add a user code on my Smartcode touchscreen?
- Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
- Press Checkmark symbol once.
- Enter Mastercode.
How do I change the code on my Kwikset lock 264?
How do I add/delete a user code on my 264 Deadbolt?
- Enter your Programming Code.
- Press “”Kwikset”” then “”1″” then “”Kwikset””
- Enter a new User Code. It must be between 4 and 10 digits.
- Press “”Kwikset””
- Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.
Contents