Open the battery compartment cover by unscrewing the screw on the top and slide up.
Changing the Battery
- Make sure the batteries are oriented correctly.
- Replacing the batteries does not reset stored Access Codes.
- You will need to use the app to connect to your Lockly to re-establish syncing for the app history log.
What batteries does Lockly use?
And as you can imagine, powering a lock and a camera requires a lot of energy: You’ll need a eight AA batteries. (Lockly claims a roughly 6-month battery life, but a 9-volt emergency adapter is available on the bottom of the device in case the batteries die while you’re out and about.)
How long do Lockly batteries last?
Under normal to heavy use, LOCKLY smart lock battery will last up to 9 months to a year on average. If your battery drains faster than average, check on the installation of the deadbolt.
Why does my Lockly lock keep beeping?
When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen.Low Battery: Battery Icon on the display keypad will light up to indicate low battery. Solution: Replace batteries immediately to avoid battery failure.
How do I remove Lockly lock?
How to Delete in App:
- Open the Lockly app and choose your lock.
- Go to Access Management.
- Swipe over to the Fingerprint tab and select.
- Select the fingerprint you wish to delete.
- Select Delete User and then Confirm.
How do you unlock a Schlage keypad lock with a dead battery?
How do you unlock a Schlage Control lock that has a dead battery?
- Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw.
- Wait for 1 red light and then 3 green lights with 3 beeps.
- Present a valid credential.
- Rotate the bolt throw away from the door edge.
- Replace the batteries.
Is Lockly waterproof?
Is Lockly waterproof/weatherproof? The outside portion panel of Lockly is weatherproof. Our smart lock is rated for around -4 degrees Fahrenheit (beyond the freezing point) and up to 140 degrees Fahrenheit.
Can you use lithium batteries in Schlage lock?
Ensure You’re Using the Right Batteries
All Schlage electronic/smart locks are powered by alkaline batteries (non-rechargeable), and that’s what Schlage recommends. While lithium or other types of rechargeable batteries may work, you may experience undesirable operationjust like what you are probably experiencing.
Does Smartlock drain battery?
Yes, the battery in smart lock will drain faster if you connect it to the Wi-Fi Bridge. It’s because the smart lock needs to be connected to the Wi-Fi Bridge at all times. The connection between these two devices will consume the battery of the smart lock.
Where is Lockly made?
Hong Kong
Hong Kong, 24 January, 2019 Lockly, an award-winning Silicon Valley-based technology company, today unveiled its newest innovation in Hong Kong: the all-in-one Lockly Secure Smart Lock series, including Secure LUX, Secure, Secure PLUS, and Secure PRO, powered by PIN Genie technology, offering six different door
How do you change auto-lock on Lockly?
Answer: Our auto-lock timer will automatically lock the door after a certain amount of time after being unlocked. To change or disable the settings of Auto-Lock Timer, please go in your Lockly App > Click on Settings at the bottom toolbar > Click on Auto-Lock Timer and adjust the setting to your preference.
How do I change the code on a Lockly deadbolt?
How do I set up Access Codes on my LOCKLY®?
- Press the program button located at the back of the lock.
- Press 1 on the screen to enter Add Passcode Mode.
- Input your new door code between 6-8 digits.
- Press OK.
- Re-enter the door code to confirm.
Why is my Lockly not working?
Make sure that you and your WiFi hub are connected within 10 feet of the Lockly. Make sure you are using the Lockly App and not Pin Genie. Make sure that your WiFi hub is in a spot with strong WiFi signal. You can try moving your router closer to the WiFi hub to see if it resolves the issue.
What is Lockly access portal?
LOCKLY Access Portal allows you to view and control where, when, and by whom your LOCKLY smart locks are being used from anywhere in the world.
Why is my Lockly not locking?
Make sure you have the latest version of everything on your phone Check your OS and Lockly App to make sure everything is fully updated. Also go into your Lockly Settings to make sure that your firmware is completely up to date. After everything is up to date, reboot your lock to see if it resolves the issue.
What is Lockly access portal sync?
PROPERTY MANAGEMENT READY: Lockly Access Portall is a property management system for Lockly smart lock owners that is designed for easy management of multiple properties, Lockly Access Portal provides door access monitoring, timed updates, sub-admin controls, and more.
How do you change the battery in a Schlage lock?
The Schlage Connect Smart Deadbolt requires four new AA alkaline batteries, installed on the interior side of the lock. Remove the black battery cover on the interior side of the lock by sliding it up. Unsnap the battery connector (a short wire), remove the battery tray and replace the batteries.
What happens if Schlage lock battery dies?
All Schlage electronic locks are battery operated, so they will continue to work during a power outage.If the battery is dead and you need to unlock the door, you can perform an emergency battery jump start.
How do you activate Lockly?
Lock your Lockly Secure by pressing the OK Button anytime when the door is closed. Lockly Secure will also auto-lock after five (5) seconds after unlocking and opening. Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button.
How do I connect Bluetooth to Lockly?
How to Pair Lockly with the App?
- After completing installation of your lock, download the Lockly app from your app store.
- Open the App and create an account or log into your existing account.
- Select Set up a New Device.
- Stand within Bluetooth range of your Lockly and choose the type of the Lockly you wish to pair.
What is Lockly family mode?
Family Mode is an app feature that allows Admin accounts to sync and monitor all locks at-a-glance via LOCKLY App. This is highly recommended for those with multiple LOCKLY door locks installed in their homes, rentals, and properties.No need to reprogram users for each new lock.
Contents