Add 1 to your number of spaces to get the number of battens on the wall. Now multiply your batten width by the number of battens. Subtract that number from your total wall length. Divide that number by the number of spaces you calculated earlier, and THAT number will be your exact spacing between each batten.
How far apart should batten boards be?
Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that’s just a personal preference. Our wall is 164” wide, so we used 8 batten (for a total of 7 spaces) with a distance of 19.42 inches between each batten.
What is the spacing on board and batten siding?
Board-and-Batten is a vertical pattern created using cedar boards and battens of various widths for a wide range of appearances. For nominal 6 inch boards spaced ½ inch apart, battens should overlap by a least 1/2 inch. With wider boards, increase batten overlap proportionately.
How far are battens apart?
Each product has different requirements, for example, batten spacing for (0.42BMT) corrugated metal roofing needs to be no more than 1100 mm apart, but batten spacing for 0.48BMT metal roofing can be up to 1600 mm apart.
What is the average width of board and batten?
Board and batten siding is a vertical design created using wide clear or knotty cedar boards spaced apart with narrower boards (battens) covering the joins. There are no set board or batten widths with this cedar siding, but a common combination is 1″x2″ or 1″x3″ battens laid over 1″x10″ or 1″x12″ boards.
How wide are boards for board and batten?
Traditional board and batten uses wide boards and overlying narrow battens. For this style, the vertical boards will range in width from 6″ to 12″ with a 1/2″ to 1″ gap between the boards. The narrower battens that overlay the boards will range between 2″ and 4″.
How thick should board and batten be?
Bottom boards: 4-1/2” Top Boards: 3-1/2” Battens: 2-1/2”
How thick should wood be for board and batten?
The boards should be roughly 1 inch thick and between 6 and 10 inches wide (Figure 2). I typically use post oak because it’s a common wood where I live in the Missouri Ozarks and is durable, though most hardwood and many softwoods, such as cedar, would be fine.
How high should board and batten be 8 foot ceilings?
A general rule of thumb for your baseboards is the 7 percent rule — they should equal 7 percent of the overall height of your room. So, if you have 8-foot ceilings, your baseboards will look best at around 7 inches high.
What do you put behind board and batten?
Attach Underlayment to Wall
To get started we did complete our plaster repairs behind where the board and batten would go. And because the walls aren’t in the best shape, we decided to use sheets of underlayment behind the battens vs how a lot of other people do it and just paint the wall to match the trim.
Does board and batten need to be caulked?
For cement board and batten siding, installation requires the battens to be caulked.
What size should battens be?
A true batten is 2-inches in width or smaller, but you can use larger widths by installing trim in place of a batten if you want a thicker appearance. They’re installed directly over the vertical panels to get the traditional look.
Do you caulk board batten?
When installing a board and batten treatment on walls – you are bound to find plenty of joint gaps after you add one coat of paint. Caulk is your best friend. It seals all the gaps.
How high should board and batten be 9 foot ceilings?
On 9-ft walls, I would go with an 8-inch baseboard. This is what we have throughout our house.
How tall should I make my board and batten wall?
The traditional rule of thumb is that wainscoting height should be a third of the wall’s height, including the cap or any moldings. So if you have 9-foot walls, then 3-foot (or 36-inch) wainscoting will look great. Scale down to about 32 inches for rooms with 8-foot walls.
Does board and batten add value?
Having a sound exterior is a crucial investment that should be tended to before cosmetic repairs! Crown moulding, board and batten, plank walls, beadboard, and trim all add character and charm to a home and give it a custom, “high-end” look.
Do you need plywood under board and batten?
Board-and-batten can be installed onto solid plywood or OSB sheathing. If your sheathing is not solid, you will need to first attach horizontal furring strips. With a helper, expect to spend a day installing 800 square feet of siding.
Is board and batten out of style?
Today, board and batten has been largely removed from it’s practical origins. Exterior board and batten still exists, but the most popular use of this design is interior. Entire walls or ceilings can be covered in board and batten, or it can be used as wainscoting.
How do you do board and batten without removing baseboards?
Use very thin battens or bead board paneling that fits on top of the existing baseboard. The top edge of most baseboards is no more than 1/4″ thick. This option results in a pretty flat wall treatment without a lot of dimension. Keep the existing baseboards and create an optical illusion of sorts.
Contents