How do I measure it? To measure linear footage, start by measuring the length in inches. Then divide the total inches by 12. The length is the linear footage, so no fancy linear foot calculator is required.
How is railing length calculated?
Overall length is determined by measuring the horizontal distance from the edge of the nosing on the first tread at the bottom of the staircase to the edge of the nosing on the floor/landing at the top of the staircase. The final measurement to acquire is the distance along the nosing.
How much is deck railing per linear foot?
Deck railings cost on average $93 per linear foot, installed. This will vary from about $42 to $648 per foot. Labor charges will be about $30 per foot. Materials can run anywhere from $15 to $600 per foot.
How do you measure stair railings?
Before you go shopping for your handrails for stairs, measure from the nosing of the top landing to the floor at the bottom of the stairs and add 2 ft. This is the length of stair railing material you’ll need. You’ll find code-approved handrail and the other materials you’ll need at lumberyards and home centers.
How is railing height measured?
Handrail height on the stairs should be no less than 34 inches and no greater than 38 inches. The way this is measured is to begin at the leading edge of the stair nosing and run an imaginary vertical line upward until it reaches the top of the railing.
How much does TimberTech railing cost?
TimberTech/Azek Railing Costs
The cost of TimberTech railing products is as variable as the items they offer. The general cost of composite deck railing is about $55 per linear foot, including installation. If you are willing to take the railing on as a DIY project, composite generally costs around $30 per linear foot.
What is the most cost effective deck railing?
Per Foot Material Cost of Deck Railing. As with all things deck, wood is the most economical choice. One of the easiest railing materials to work with and buy. Maintenance costs will come into play later, but with the initial cost, wood is your entry-level price for a basic railing design.
How much do wooden railings cost?
Average wood railing cost installed by a deck contractor or handyman is $30.00 per linear foot. DIY homeowners incur an average cost of about $14.00 per linear foot when good-quality treated lumber is used.
How do you calculate railing spindles?
To determine the correct number of spindles for the guard, measure the length of the railing. Then, count the number of vertical guards and the measure the thickness of each. Next, multiply the number of spindles by the thickness, and then subtract this number from the length of the railing.
How do you calculate railing spacing?
Measure the length of the space between the end supports of the balustrade. For this example, assume it’s 13 feet 5 ½ inches, or 161 ½ inches. Divide that length by four to determine the number of spaces you will need while having a minimum of 4 inches distance between balusters.
How do I calculate how many spindles I need?
It is as simple as that. To calculate the number of stair spindles required, count the number of treads (steps) on the single flight, making sure not include the landing area, multiply by two, and then subtract two (as you will only require one spindle on the top and bottom steps to make room for the newel posts).
What is the formula for calculating stairs?
How to Calculate Stairs – Example 1
- 450mm / 150mm = 3. This tells us that with a riser of 150mm we will need 3 risers/steps.
- 450mm / 2 = 225mm.
- Twice the Rise plus the Going (2R + G) should be between 550mm and 700mm.
- 2 x 150mm + 275mm = 575mm.
How many balusters do I need calculator?
In order to comply with building regulations and codes, balusters must be spaced no more than 4 inches apart on center. The general rule is that your railing must have three balusters per foot (every 12 inches), although you can place them closer together if you’d like.
What is the standard width of a handrail?
Handrails must be between 1¼ and 2 inches in diameter. section shall have a perimeter dimension of 4 inches (100 millimeters) minimum and 6¼ inches maximum, and a cross section dimension of 2¼ inches (57 millimeters) maximum. construction tended to be larger than this.
How many brackets do I need for a handrail?
Although there are no official guidelines for how far apart handrail brackets need to be, when you’re installing a handrail it’s a good idea to fit the brackets no more than one metre apart. Fitting enough brackets will ensure your handrail is safe and secure. For a standard 3.6m handrail you’ll need four brackets.
How long is a standard handrail?
1. Height Requirements Chart
| IRC | OSHA | |
|---|---|---|
| Residential | Stair Rail System | |
| Handrail Height | 34″ to 38″ | 36″ to 38″ may also serve as Guard |
| Railing Height | 36″ min | 36″ to 38″ |
What is OSHA standard for handrail?
The top rail must be at least 42 inches in height (§1910.29(f)(1)(ii)(B)) and the handrail must be 30 to 38 inches in height (§1910.29(f)(1)(i)) (as measured at the leading edge of the stair tread to the top surface of the rail).
What is the height of a railing on a deck?
36 inches
The International Residential Council (IRC) requires guardrails to be at least 36 inches high, measured from the deck surface to the top of the rail. Commercial decks attached to multifamily buildings need 42 inch high guardrails.
How high should guard rails be?
(a) A standard guardrail shall consist of top rail, midrail or equivalent protection, and posts, and shall have a vertical height within the range of 42 inches to 45 inches from the upper surface of the top rail to the floor, platform, runway, or ramp level.
How much is TimberTech per linear foot?
TimberTech Pro and Edge Pricing Table
| TimberTech Decking Prices | Cost/linear ft. | Cost/square ft. |
|---|---|---|
| Edge Premier | $3.10 – $3.25 | $6.85 – $7.50 |
| Pro Terrain | $3.35 – $4.05 | $8.75 – $9.35 |
| Pro Tropical | $4.90 – $5.35 | $11.15 – $12.00 |
| Pro Legacy | $5.80 – $6.35 | $12.35 – $13.50 |
How much does AZEK railing cost?
Decking Board Prices
| Decking | Cost/linear ft. | Cost/square ft. |
|---|---|---|
| Azek Arbor | $5.80 – $6.35 | $11.00 – $13.00 |
| Azek Vintage | $6.50 – $7.00 | $11.40 – $14.00 |
| Railing Kits | $30 – $45 per foot | N/A |
| Top Rail Only | $16 – $20 per foot | N/A |
Contents