Select the comfort control that you want to set by pressing the button under the SYSTEM display on the lower right of the thermostat. Select either cooling, heating or auto. Use your finger to press the button below the set/clock/day/schedule on the lower left of the thermostat.
How do I reset my Trane thermostat?
Here are the steps you need to take to reset your AC thermostat.
- Shut Down Your AC at the Thermostat.
- Find Your Circuit Breaker Box.
- Reset the Circuit Breaker for Your AC Unit.
- Wait 30 Seconds.
- Turn the AC Thermostat Back On.
- Call Vredevoogd Heating & Cooling for all your Furnace & AC needs.
What is permanent hold on Trane thermostat?
Permanent Hold changes the temperature setting until Permanent Hold is cancelled. 1. Press Hold key.
What is hold on Trane thermostat?
By pressing Hold, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the Run button and return to your typical programming.
The compartment usually sits at the very bottom of the appliance. If you look inside the blower motor fan, you should find the reset button. Look for a small red or yellow button on the side of the blower motor.
Why is my Trane thermostat not working?
Your thermostat/control may be off or set incorrectly.Check temperature setting on thermostat/control. If no change, contact your local Trane Dealer. In the meantime, try turning off your thermostat/control for 1 to 3 hours to see if it will reset itself.
How do I reset my Trane 724 thermostat?
Locate the breaker switch for the thermostat. Flip the switch to the OFF position for 20-30 seconds. Return the switch to the ON position and allow the thermostat to reboot.
How do you turn off the schedule on a Trane thermostat?
Press HOLD next to the directional buttons to clear all schedules in the thermostat. This will allow you to operate the thermostat in a manual mode for longer periods. The temperature will remain at the desired temperature you set. You can go back to schedule mode by pressing the button under the RUN SCHEDULE display.
What is ESM on Trane thermostat?
“normal” and “esm” put the thermostat into home and away mode. Normal mode is for when you are home, ESM (energy savings mode) is for when you are away.”auto” tells the thermostat to heat or cool depending on the temperature. “off” turns both heating and cooling off.
Where is the model number on a Trane thermostat?
Finding the model number of a thermostat is easy. It should be printed on the back of the face-plate.
How do I turn off the hold on my thermostat?
To cancel the temporary adjustment at any time, press CANCEL. Press HOLD to permanently adjust the temperature. The Hold function disables the program and allows you to adjust the thermostat manually, if necessary.
How do I set my thermostat to permanent hold?
A hold can be set by increasing or decreasing the temperature on your thermostat while it’s running on its normal schedule. Once adjusted, a “Hold Until” message will appear, indicating a temporary hold. To set a permanent hold, click on the “Hold Until” message and choose “Permanent Hold”.
Should I turn my thermostat down at night?
At night and when you are away, it is recommended to just turn your thermostat down 7-10 degrees lower than what you would typically have the heat set at. By doing this, the U.S. Department of Energy states you can save as much as 10% a year on heating. Take caution to turning your thermostat down dramatically.
Why does my thermostat not reach set temperature?
Loose wiring is another common culprit to a thermostat not reaching set temperature.Corrosion could also be happening with your wiring, or there could be a buildup of dust, which could also lead to system issues. Once an HVAC expert opens up your thermostat, they’ll be able to determine the problem.
What is the difference between auto and on on my thermostat?
AUTO means that the fan turns on automatically only when your system is heating or cooling air. Once the thermostat reaches the desired temperature, the entire system shuts off until the next cycle. ON means that the fan is constantly on and blowing air when your HVAC system is not heating or cooling air.
Why is my Trane AC running but not cooling?
Your filters may be clogged or dirty Clean or replace the filters. Consult your local Trane Comfort Specialist if you are unsure where the filters are located. Your thermostat controls may be set incorrectly Try turning the thermostat off and then on again. Reset to the desired temperature and see if that helps.
How do I know if my Trane thermostat is bad?
Your Thermostat Has No Power or Is Unresponsive
The most obvious sign that your thermostat might be bad is if it has no power or is unresponsive. If there’s no change in your home’s temperature when you adjust the temperature, or the display is unlit or unresponsive, you might have a broken thermostat on your hands.
How do I reset my thermostat?
Here are the step-by-step reset instructions:
- Turn your thermostat off by switching it to the off position.
- Find the breaker that powers your HVAC system and turn it off.
- Wait 30 seconds and turn the breaker back on.
- Turn your thermostat back on.
Pressing hold will keep your thermostat at its current temperature until you change it. Press the “Run” button when you are ready to return to your normal schedule.
Contents