How Do You Activate Lutron Shades?

Plug the plug-in power supply into an outlet. Your shade is now powered! Grasp the headrail with both hands and tilt it back into the brackets, pressing gently until you hear a click. Hold “Close” button for about 5 seconds, until the shade button blinks and turns off.

How do I add shades to Lutron app?

Plug in and connect the Smart Bridge to your router. Download and install the Caseta Wireless app to your smartphone. After the system setup is complete, go to the Settings menu and click Add Device to associate your shades. Select the appropriate shade in the app, and follow app instructions to complete the process.

How do you set limits on Lutron QS shades?

Press and hold either arrow button to move the Window trea- ment to desired Open Limit. Press and hold the Open Limit button until the Green LED flashes. Open Limit is stored. Tap the Close Limit button.

What type of wire is used for Lutron shades?

Lutron has a spec for cable. Basically it is (2) 18 gauge (larger for long runs) and (2) 22 gauge for communication. The smaller the cable the better. It gets crowded inside the shade.

How do I program my Lutron 4 Group remote?

The 4 Group Shade Remote is added and programmed in the same way as a Pico Remote. To do this, go to Settings > Add Device and select the Shade Remote. The app will then tell you which button to push and hold to pair. Once paired, you can name the remote and add it to a room.

See also  Are Copper Water Tanks Safe?

How do I connect my Lutron to a new WIFI?

  1. Make sure your Smart Bridge is connected to the new router.
  2. Connect the ethernet cable from the bridge directly to a LAN port on the new router.
  3. Re-set your router by cycling power off for 10 seconds and then turn it back on.
  4. Re-set your Smart Bridge by cycling power off for 10 seconds and then turn it back on.

How do I find my Lutron IP address?

The Lutron App will walk you through the initial system setup and adding devices. The integration report and IP address settings are found in the Settings ->Advanced menu of the app. Tap the icon in upper left corner to access the Settings menu.

How do I set up my Lutron Pico remote?

Press and hold the “Off” button on the dimmer/switch you wish to pair the Pico remote to for 6 seconds until the green indicator lights on the unit begin to flash, then release. This will place the device in pairing mode.

How do you reset a Pico?

Pico Wireless Controller – 3rd Generation (PJ2-)
Step 1: Quickly triple tap and hold the bottom button on the Pico control. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for six seconds. The Pico control has now been returned to Factory Default Settings.

How do I connect my Lutron?

Tap on the Lutron Connect app in the search results. Tap on the Install button and then choose to Accept the access request. The Lutron Connect app will then begin to download onto the device. Make sure that the mobile device is connected to the local Wi-Fi network that the Lutron Connect Bridge resides on.

See also  Does Ensuite Increase House Value?

Why is my Lutron app not working?

All Users: If you are still unable to connect, we recommend that you reset your router by disconnecting the power for 10 seconds. This will restart the bridge. If the Lutron App is still unable to find the bridge, this is most likely because the Bridge and your smart device are not connected to the same network.

Contents

This entry was posted in Smart Home by Ruben Horton. Bookmark the permalink.
Avatar photo

About Ruben Horton

Ruben Horton is a lover of smart devices. He always has the latest and greatest technology, and he loves to try out new gadgets. Whether it's a new phone or a new piece of software, Ruben is always on the forefront of the latest trends. He loves to stay up-to-date on the latest news and developments in the tech world, and he's always looking for ways to improve his own knowledge and skills.