Wake up your ecobee Smart Thermostat, then tap Menu. Tap Comfort Settings. Select the Comfort Setting you wish to customize. Tap the temperature controls to open them.
How do you restart ecobee?
You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.
Why is my ecobee completely dead?
One of the most common causes for loss of power to the ecobee during cooling season is due to safety features such as a float switch or condensate pump cutting power to the thermostat to prevent flooding. Condensation is a natural part of the air conditioning process.
How do I get ecobee back online?
If it’s not showing as connected to ecobee.com, follow the steps below:
- Try power-cycling the ecobee by removing it from the wall and leaving it off for two minutes.
- After two minutes, place the ecobee back on the wall.
- To reconnect to Wi-Fi, go to MAIN MENU > SETTINGS > WI-FI > NETWORK > SELECT WI-FI NETWORK.
What is ecobee Sleep mode?
So what happens during Sleep mode w/ “Follow Me” on is Ecobee uses all of the sensors in the “Sleep” profile if there is no motion detected anywhere. However, if motion is detected, Ecobee switches to use those sensors that have detected motion.
If you find yourself needing to reset your ecobee Switch+, simply follow these steps: Press and hold the main button for 5 seconds. Wait for the voice prompt to say “Reset to factory settings.” Press the main button again.
Why is my ecobee not turning on my AC?
The most common cause of your air conditioner not turning on is an excessive build-up of water from condensation within your HVAC system. Your HVAC system has a drain pan or drain line.Some signs that you have a backed-up drain pan or drain line are: Your ecobee thermostat is powered off or is frequently rebooting.
How do I restart ecobee after power outage?
Flip the breaker back on. Wait at your breaker box for 30 seconds, to make sure it does not flip back quickly. Allow your thermostat an additional minute to finish starting back up. Try adjusting the temperature to ensure it’s functioning properly.
What happens to ecobee when power goes out?
Generally, your home is still safe
In event of server outage, your Nest, Ecobee, or other smart thermostat remembers the schedule that it was going to run and continues to run it. It doesn’t need to check in with the mothership to keep your HVAC running. (Note that this is in event of a server outage.
How do I reconnect my ecobee thermostat to WIFI?
Double-check your router configuration
After a recent update in our security protocol, ecobee thermostats no longer supports TKIP encryption types. Ensure that your router encryption type is set to either WPA-AES or WPA2-AES.
How do I turn on my ecobee fan?
3. Quick Changes
- Tap the Quick Changes menu icon (the gear icon with 3 lines on the bottom of the thermostat screen)
- Tap the Fan Hold button.
- Using the horizontal dial, select a preferred time duration for the fan to run in ON mode.
- Tap the < in the top left to leave the menu.
- Exit the Quick Changes menu.
Does my ecobee have a battery?
The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.
How do I get my ecobee off hold?
How do I adjust the hold setting? You can change your hold preference to hold for 2 hours, 4 hours, Until the Next Scheduled Activity, Until I Change It or Decide at the Time of Change. To do this, just tap MAIN MENU > SETTINGS > PREFERENCES > HOLD ACTION and make the changes you like.
How do I turn on my ecobee schedule?
2 Set Your Schedule
- Wake up your ecobee Smart Thermostat, then tap Menu.
- Tap Schedule.
- Tap the day you want to adjust.
- Tap on the activity you wish to adjust.
- Select the desired start time, then tap Save.
- If you wish to add a new activity, select the +.
- Select the Comfort Setting and then tap Save.
How do you manually reset ecobee?
How to Factory Reset an ecobee Smart Thermostat
- From the Home screen, press Menu.
- Select Settings.
- Go to Reset.
- Choose Reset All Settings then confirm your selection by pressing Yes.
- Choose the reset option that suits your needs:
- The ecobee thermostat will be reset to factory defaults.
What do I do if my AC isnt blowing cold air?
Try cleaning your air conditioner’s filter and the coils to see if improving the airflow fixes the problem. If there is ice buildup, you’ll need to run the unit with just the fan in order to melt it off. If that doesn’t get the unit blowing cold air again, it could be refrigerant levels are low (see below).
Why will my air conditioner not turn on?
If your AC unit won’t turn on, the first thing you should check is if there was a blown fuse or a tripped breaker. There’s a good chance that the problem is a tripped breaker if the circuit was overloaded.However, it is also possible that a power surge caused your air conditioner to blow a fuse or trip a breaker.
How do I know if my ecobee thermostat is working?
To access the Test Equipment setting on your ecobee thermostat, tap on Menu > Settings > Installation Settings > Test Equipment. Tap on Test Equipment, then tap OK to confirm.
Why won’t my furnace turn on after power outage?
If the thermostat is on, reset it. Check the breakers since they may have tripped during the outage. If so, flip them off and then back on.In most cases, the safest course of action is to contact your go-to HVAC company if your furnace doesn’t work after a power outage.
Why isn’t my AC working after power outage?
Usually, the 3 main reasons your AC won’t blow cold air after a power outage include: A tripped circuit breaker. A bad capacitor. Compressor failure.
Why am I not getting power to my thermostat?
A quick fix to restore your thermostat’s power is a tripped circuit breaker or blown fuse, depending what you have in your home. Sometimes a surge can cause this issue. If you check your electrical box and a circuit breaker is tripped, just flip it back. If you have fuses, replace the fuse.
Contents