How Do I Use Vivint Keypad?

How do you enter a vivint door code?

SkyControl 3.0 – Change Door Lock Code

1. At the home screen, tap the menu icon in the lower right.
2. Tap Users.
3. Enter your 4-digit PIN.
4. Select the user you want to edit.
5. Make sure their Separate lock PIN option is toggled on.
6. Select Lock PIN to add or edit their door lock code.

How do I set up my vivint keyboard?

Install keypad and mounting plate
Place the keypad on the exterior side of the door by sliding the rod through the D shaped hole and passing the cable under the deadbolt. While holding the keypad in place, pass the cable through the center hole in the mounting plate then push cable into bottom hole.

How does vivint door lock work?

Smart locks are keyless door locks that allow you to open your door without a physical key.Many models feature a numeric keypad on the lock for entering a unique access code. A smart lock connects to your home’s Wi-Fi network, which allows it to receive the code or smartphone command to lock or unlock.

Why is my keypad door lock not working?

If the keypad buzzes twice after a code is entered and the door fails to unlock, this means the keypad is not communicating with the lock. A reset should fix this issue.To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again.

How do I reset my Vivint door code?

Factory Reset:

1. Remove the battery pack.
2. Press and HOLD the Program button.
3. Re-insert the battery pack (keep holding the Program button for 30 seconds). The lock should beep and the LED will flash red.
4. Release and press the Program button once more.
5. The lock will re-initiate the handing process (extend/retract the bolt).

Can I use Vivint door lock without service?

Can I use Vivint without a subscription? You can use Vivint equipment without a subscription, but you wouldn’t have the benefit of professional monitoring, couldn’t access the mobile application, and won’t be able to use the 24/7 technical support service.

How do I access my Vivint installer toolbox?

All controller functions are accessed through the installer toolbox, which is hidden in the user interface. It can be accessed by touching a text area on the settings screen and then entering the installer PIN code (see Figure 2 and Figure 3). The SmartHub can be used to replicate Z-Wave network information.

What Smart Lock does Vivint use?

Kwikset smart locks
Vivint works with the 888 SmartCode Electronic Deadbolt with Z-Wave Technology. Technically, the Vivint smart home system is compatible with all Kwikset smart locks, since they run on the Z-Wave protocol.

How do keypad door locks work?

How Keypad Locks Work. Instead of a key, this type of lock system requires a numerical code to grant entry to a facility or property. The code is punched in by users via a numerical pad, similar to those on a basic calculator. If the correct code is entered, the door lock or deadbolt should release.

What is my door code?

Your door code is a numeric code stored on the locks of the units you have access to. If you enter this code on the keypad of a lock that belongs to a unit you have access to, the lock will unlock. Your door code is unique to you and should NOT be shared with anybody.

How do I unlock my vivint lock?

Locking and unlocking doors is simple from the Vivint Smart Home app. Door locks are displayed under the House icon on the home screen. Simply toggle the switch to lock or unlock doors. If you have multiple locks, you may need to scroll down.

How do you use Smart Lock?

Smart Lock can be easily activated through the Android device settings panel:

1. Select the Security & Location option.
2. Tap on Smart Lock.
3. Enter your PIN, pattern, or password.
4. A new screen with choices for Smart Lock options will appear.

Why is my electronic lock not working?

Battery failure is the most common reason the electronic lock on your gun safe isn’t working properly. Typically this is because the battery is dead. But, your electronic lock might also not be working properly if the battery doesn’t have enough amperage.

What is Vivint installer code?

2203 is the default installer code on the Vivint security system.

How do I silence my Vivint alarm without the code?

To disarm your alarm, Touch the Shield icon on your home screen and drag it down to disarm. 4. Press the alarm icon in the middle to disarm the system and cancel the alarm if there is an alarm in the process.

How do I change my PIN on my Vivint panel?

To change user PINs, watch the video or follow the steps below:

1. From the home screen of your Go! Control, tap Security.
2. Tap Menu.
3. Tap Toolbox.
4. Tap User Codes.
5. Enter your 4-Digit PIN.
6. Choose the user you would like to edit.
7. Enter the new PIN in the field provided.

Do I own my Vivint equipment?

Do I Own or Lease Vivint’s Home Security System? You own the equipment. You can either pay for all the equipment up front or pay for it over the course of a few years. If you decide to pay for it over time, Vivint offers 0% APR so there’s no added interest.

How do I use my Vivint camera without service?

Can I Still Use a Vivint Camera Without Service?

1. Vivint cameras cannot be used without service. They require the purchase of the Smart Home Video Monitoring monthly subscription plan.
2. You will have to pay your contract in full to cancel it early.
3. Those on a month-to-month contract can cancel anytime without penalty.

How do I turn my Vivint panel off?

On the back of the panel, pull the tab on the left side to remove the battery. This will power the panel down.

How do I add Z-wave to Vivint?

At the Vivint panel, press the Home button, then select the three dots in the bottom right-hand corner of the panel. Select Software Version and enter the 4-digit code that appeared in Site Manager after unlocking the Installer Toolbox. Select Smart Home Devices > Z-wave > Add Node. Turn on the physical light switch.