How Do I Use Mi Light?

Posted on by

Install the downloaded app onto your phone. Go to the WI-FI (WLAN) Settings on your mobile phone or tablet and choose to connect to ‘Milight‘. The link indicator on your wifi controller box will indicate when the connection is made. Go to the Milight App you downloaded and installed to your device.

How do I control my MI light?

How to control Mi-Light products? Synchronising the lights

  1. From the bottom tabs choose “Colors”
  2. Choose zone e.g. Zone1.
  3. Tap on the link icon.
  4. Connect the RGB LED strip to the FUT037 controller.
  5. Connect the power supply (in this case power supplies with DC jacks come handy)

How do I connect my MI light to WiFi?

To connect you’ll need to switch ON and OFF the smart bulb five times. — The smart bulb will then start blinking in multi-colour and then emit a constant white light after 5 sec. — Go back to the Mi Home app and check “Operation Confirmed” and then “Next” option to connect the Mi Smart LED Bulb to WiFi router.

How do I pair my MI light app?

Go to your smart device Wi-Fi settings, you will see a new Wi-Fi network available called “milight” (this is the default network name of the Wi-Fi LED Controller Hub). Select “milight” and connect to it. Run the “milight” app on your smart device when it has finished installing.

How do I connect my MI light remote?

Turn ON the power by switching ON your main wall switch and quickly press one of the “I” zone buttons 3 times within 3 seconds after turning the main switch ON. If the synchronisation went smoothly the FUT105 light bulbs will flash 3 times and you are good to go with remote controlled light.

See also  What Are The Benefits Of Two Routers?

How do I set up my MiBoxer?

The configuration is very straight forward.

  1. Download and install the MiBoxer app from the App Store or Play Store.
  2. Open the MiBoxer app and register your account.
  3. In the Device List screen touch the + button.
  4. Choose the 2.4GHz Gateway (WL-Box1)
  5. Take the WL-Box1 out of the packaging.

How do I reset my MI light remote?

1. Remove power from the controller for 5 seconds 2. Restore power and within 3 seconds, choosing the desired remote, press the ON button once and the light should flash white 2 times.

How do I connect my MI smart bulb without WiFi?

To control your smart bulb without WiFi, you simply turn on the light switch, open the Bluetooth app of the bulb, and the bulb automatically “found.” You then press ‘add device,‘ ‘connect’ or ‘pair’ on the app. Then you control the bulb’s basic functions through the app as normal.

How can I use Mi smart bulb without router?

So to accomplish this, follow these steps exactly in this order:

  1. Create a WiFi hotspot on the second Android device or mobile pocket WiFi, and give it an SSID / password you won’t mind using from now on.
  2. Open your WiFi on the first Android device, and connect to the hotspot you just created on the other.

What is Miboxer?

This is an App for Bluetooth Mi-light bulb. Easily you can control the Mi-light Bluetooth series products with your smartphone via bluetooth. You can control the color, brightness, saturation and color temperature and music control light discoloration function of the lights through the APP. Android apk V2.6.

See also  What Can Go Wrong With An Immersion Heater?

How do I reset my MI ceiling light?

Restoring Factory Settings
Use the wall switch to turn the ceiling light on and off seven times consecutively (turn off the ceiling light and wait for two seconds, then turn it on and wait for two seconds, this counts as one time).

How do I program my RF wireless remote?

To pair the remote, remove power from the controller for 5 seconds. Re-apply power to controller and within 5 seconds, press and hold 100% and 25% buttons for 5 seconds. Up to three remotes can be paired to a controller.

How does RGBW controller work?

Z-Wave network

  1. Disconnect power supply from the device.
  2. Place the RGBW Controller within the direct range of your Z-Wave controller.
  3. Set the main controller in add mode (see the controller’s manual)
  4. Connect power supply to the device to start auto-inclusion.
  5. Wait for the adding process to end.

How do I connect my MiBoxer to WIFI?

Simply plug the Wi-Fi hub into a computer with the included USB cord or into an outlet by using a USB wall adapter, and download the free MiBoxer app on your Apple or Android device. Connect to the Wi-Fi Hub using your device’s Wi-Fi settings, and use the app to sync your LED lights (see PDF instructions for details).

How do I turn on my Xiaomi lamp?

Remove the lamp from packaging, connect a power cable to power supply. 2. Press a control button. Click on light control button to turn on / off the lamp.

Can I connect the Mi smart bulb to an iPhone?

Can I connect the bulb to an iPhone? Yes, the bulb can be controlled remotely using the Mi Home App which is available on both Android and iOS.

This entry was posted in Smart Home by Ruben Horton. Bookmark the permalink.
Avatar photo

About Ruben Horton

Ruben Horton is a lover of smart devices. He always has the latest and greatest technology, and he loves to try out new gadgets. Whether it's a new phone or a new piece of software, Ruben is always on the forefront of the latest trends. He loves to stay up-to-date on the latest news and developments in the tech world, and he's always looking for ways to improve his own knowledge and skills.