How Do I Use Amcrest?

How do I use my Amcrest camera?

Connect the camera to a power supply using the included power adapter. Wait 30 seconds for the camera to start-up and initialize. Connect the camera to the internet, either through a wired or WiFi connection. Either by using the App Setup method or Desktop Access Setup method.

How can I watch my Amcrest camera online?

Most Amcrest IP cameras feature the latest in JS technology which allows you to access your camera via a wide variety of web browsers including, Google Chrome, Firefox, Safari, and other mainstream web browsers via your PC or Mac computer.

How do you set up an Amcrest?

How To Setup Amcrest View

1. Amcrest View Web Access P2P Gateway.
2. Connect the camera to a power supply using the included power adapter.
3. Connect the camera to the internet, either through a wired or WiFi connection.
4. Using Internet Explorer, Firefox, or Safari, go to www.AmcrestView.com and register for an account.

How do I access my DVR on Amcrest?

How to Access the Web User Interface (AI DVR)

1. Verify the time zone and the system time are correct, press Next to continue.
2. Enter a username and password for the DVR.
3. Enter a valid email address.
4. Enter the login credentials for your device.
5. Once logging in you will be taken to the main menu interface.

What is Amcrest smart home?

Amcrest SmartHome AI Human Detection WiFi Camera, Indoor Pan/Tilt Wireless IP Camera, Baby Monitor Mode, Auto-Tracking, Home Security Camera with Night Vision, Two-Way Audio, Nanny Cam ASH21-W (White) In stock. ASH21-W-V2. $49.99 $44.99. 4.3 star rating 15 Reviews.

How do I add a user to my Amcrest camera?

Step 1: Log into your camera via the Amcrest Smart Home app. ) icon in the upper right hand corner. Step 3: In the settings menu, please click on “Device Sharing”. Step 4: In the device sharing menu, tap on, “Add a Shared User“.

Why won’t my Amcrest camera connect?

1. Power Cycle – To power cycle the device, please remove the device from its power source and allow the device to shut down.Once complete, plug the camera back in with its power supply and allow the device to boot back up. When the device is ready, try to connect to the device again.

How do I find the IP address of my Amcrest camera?

Then, go to your mobile device and connect to the SSID of the router that the camera is on. Note: The SSID will show no internet is available for your router since it is not connected to the internet. Step 2: Open the Amcrest View Pro app and tap on the (+) symbol in the middle of the screen. Then, click on Add Device.

How do I use Amcrest Ddns?

How to Setup DDNS Using AmcrestDDNS

1. Step 1: To set up DDNS service you will need to port forward the HTTP port on your camera.
2. Step 2: After your device is port forwarded, navigate to the web UI and click on Setup>>Network>>DDNS and enable DDNS service by clicking on the Type check box.
3. Step 3: Enter a Domain Name.

How do I watch Amcrest NVR on my PC?

To enable PC-NVR, navigate to the Home Page and in the Settings menu, click on the PC-NVR icon. Once the PC-NVR tab opens, you will find your PC-NVR details, select Remote Device. Click on the Plus button to add a camera from the cameras you have connected to Amcrest Surveillance Pro.

Why is my Amcrest camera flashing green?

Note: A flashing green indicator LED means that the device was once connected successfully but has recently lost connectivity.

Where is the reset button on my Amcrest camera?

The has an external factory reset button lit by a LED located on the backside of the camera. Press and hold the factory reset button for approximately 20 seconds, or until the green light changes to red.

How do I enable P2P on Amcrest?

In the settings menu, click on Network>>TCP/IP>>P2P. In the P2P menu, click on the check box in the Enable field to enable or disable your P2P connection. The status of the P2P connection will be listed in the Status field below. To save any changes to your device, click on Save.

Can I view Amcrest camera on my computer?

Most Amcrest IP cameras feature the latest in JS technology which allows you to access your camera via a wide variety of web browsers including, Google Chrome, Firefox, Safari, and other mainstream web browsers via your PC or Mac computer. Press enter to access the web user interface.

Is Amcrest a Chinese company?

No, Amcrest is not a Chinese company. It is US-based.

What apps work with Amcrest?

Amcrest Apps

• Amcrest View Pro. Works with HDCVI/NVR/Eco HDCVI/IPC.
• Amcrest Cloud App. Works with our IP Cameras.
• Amcrest Link. Works with 960H/650TVL DVRs.
• Amcrest Connect. Works with the SmartPlug.
• Amcrest Sight. Works with the WLD Wireless Camera & Monitor.

What apps work with Amcrest cameras?

Amcrest and Foscam brand cameras can be viewed simultaneously using third party software, apps and NAS including, but not limited to Blue Iris, Security Spy, Digital Watchdog, Zoneminder, zmNinja, Live Cams Pro, Tiny Cam, Synology, and QNAP.

Does Amcrest work with Google home?

Amcrest Team see less None of our cameras are compatible with Google Home at this time.Our cameras are compatible with the Amazon Echo Show.

Does Amcrest require subscription?

Do Amcrest cameras require a subscription? No. Amcrest offers micro SD support in many cameras, so you can store your video history internally without paying any monthly monitoring fees. If you are interested in using Amcrest Cloud, however, you can use it for a relatively low cost – starting at $6 per month.