How Do I Uninstall Ecobee Thermostat?

How do I unregister a thermostat and remove it from my account?

1. Sign into the ecobee app.
2. Select your Home and then select the thermostat you wish to unregister.
3. Select the Main Menu icon in the bottom left and then select Device Settings.
4. Select Remove Device.
5. On the confirmation menu, select Remove Device again.

How do I uninstall ecobee4?

Turn off the power to your furnace / AC unit.

1. Remove ecobee from baseplate (pop it off the wall)
2. TAKE A PICTURE of the wiring, so you know what color wires go where.
3. Remove ecobee baseplate from wall and disconnect wires – LABEL the wires as you go with pieces of tape and a marker.

How do I transfer ownership of my ecobee thermostat?

To transfer your Ecobee to a new owner, you will have to log in to the Ecobee app, thermostat, or web portal. Depending on which method you choose to transfer with, you will either have to remove the old user from the account, unregister the thermostat, or reset the registration process.

How do you reset ecobee for new owner?

To reset your Ecobee:

1. Make sure the Ecobee is turned on and properly connected to power.
2. On your thermostat, navigate to the icon for the Main Menu.
3. From the Main Menu, select the option for Settings.
4. Under settings, there will be a choice for Reset.
5. When you get here, select Reset Registration.

Does my Ecobee thermostat have a battery?

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.

Can I use ecobee without C wire?

Even though it comes with an adapter for missing c-wires, ecobee is what we’d pick even for systems with a c-wire. If you’ve got a 24v HVAC system but no C-wire, check out the ecobee product line. Every ecobee ships with an adapter that you can install yourself at your furnace to make up for a missing C-wire.

What is RC and RH on ecobee?

The c in Rc stands for cool, the h in Rh stands for heat. The red wire connects to both by way of a jumper bridge. If you look closely at the image, you will see it. The Ecobee3 connects the Rc and Rh terminals automatically which means you can choose either Rc or Rh to plug the wire into.

What is the B wire on a thermostat?

O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating.

What happens if I reset my ecobee?

If you choose to “Reset All,” your ecobee will be wiped clean and returned to factory settings. Your ecobee account will be deleted, as will your schedule, preferences, and equipment configuration. You will need to set up your ecobee from scratch once again.

How do I rename my ecobee thermostat?

Through the Web Portal:
Go to ecobee.com and log in with the email and password registered to your ecobee account. Then go to SETTINGS > PREFERENCES > THERMOSTAT NAME. From the drop-down menu, select CUSTOM NAME.

How do I reset my ecobee thermostat?

You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.

How do I reset my Ecobee thermostat without password?

How do I reset my ecobee password?

1. Navigate to the login page on your mobile device, or web browser.
2. Select “Forgot password?” and enter the email address associated with your ecobee account.
3. You should receive an email with a link to reset your password.
4. Once you complete, you will receive a final confirmation email.

How do I remove the battery from my ecobee sensor?

Change the Battery

1. Place your thumb and index finger on the narrow part of the sensor stand, and your other hand on the front of the sensor.
2. Gently pull upwards to release the sensor.
3. Remove the battery by gently prying it out of the battery compartment with a thin tool such as a pen, plastic card, or screwdriver.

How long does ecobee battery last?

five years
CR2032 are the little silver coin shaped batteries used in the old ecobee Room sensors. The sensor will run for at least 18 months. The CR2477 used in the new Smart Sensors should last for five years.

What color is C wire on thermostat?

blue wire
The blue wire on the thermostat is the Common or “C” wire.

How do you know if you have C wire?

It is easy to see if you already have a c-wire connected to your system. Simply remove your current thermostat face from its baseplate and look for the terminal labeled with the letter “c.” If this terminal has a wire attached to it, you have an active “c-wire.”

What’s the difference between W1 and W2?

In a conventional system, W/W1 controls your heating system and, where applicable, W2 controls your heating system’s second stage, which helps warm the home faster.In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster.

Why is there a jumper between RC and RH?

Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.

What is white wire on thermostat?

The white wire underneath your thermostat connects to your heating system. It terminates at your air handler or furnace. The white wire connects to terminal W in industry-standard thermostats.

Are B and C wires the same?

The common wire, usually labeled C, should go in the C Terminal of the Zen Thermostat. A wire labeled O, B, or O/B is used to control whether a heat pump is in heating or cooling mode. However, on some thermostats, a wire labeled B is the common wire C. In most cases, the common wire is labeled C.

What’s the difference between O and B on a thermostat?

The O/B terminal is for heat pump systems and is used for the reversing valve. When the “O” option/position is selected the reversing valve defaults to the heating mode. If the “B” option/position is selected the reversing valve defaults to the cooling mode.