There is no direct power control button to power on/off the Reolink Go. But there is a PIR button on the Reolink app, you can enable/disable the PIR button to make the camera in working mode or standby mode. Note: Standby mode is also called sleep mode, which is a low power mode for electronic devices.
How do I get my Reolink camera back online?
Method 3: Reset Reolink Cameras by using Reolink App
- Launch Reolink App and login into your camera.
- Open Device Settings->More interface.
- Roll down the page, find and click the Restore button to reset the camera, wait for a moment until it finished.
Why is my Reolink camera offline?
Offline: the camera might be powered off or disconnect from the network. Invalid password: the password of the camera might be changed into another one.We need to reset the NVR and camera to see whether the status becomes into Previewing after that. Please try to reset the NVR and camera to check.
Why wont my Reolink connect?
Make sure that you choose the same Register Mode as Reolink App. Check whether your computer has been connected to Internet successfully. Check if the computer’s firewall has been configured properly. If you haven’t set the VPN, please also close the VPN on your computer.
How do I reconnect my camera?
Steps to reconnect your camera to an existing internet connection
- Hold down the WPS button on the back of the camera and release when the LED begins to flash white (about 6 seconds)
- Join the Alarm (XX:XX:XX) Wi-Fi network from your mobile phone or on your computer.
- Select language.
- Select Scan for Wi-Fi Networks.
How do I reset a Reolink?
Press the Reset button and hold on, then power on the camera while pressing the Reset button. Step 3. Hold for about 10 seconds then release the Reset button. After reset, your camera will return to factory default settings, then you can log in with the default username and password.
Why is my security camera not working?
Reboot the security camera
Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.
How do I connect my Reolink camera to my phone?
How to Do Initial Setup for Reolink Go via Reolink App
- Tap on the icon in the top right corner to start configuration.
- Scan the QR code on the back of the camera.
- Create the login password and click Next to continue.
- Name the camera, then click the button Next to enter the next page.
How do I log into my Reolink camera?
If you want to log in to your Reolink account, please click the humanoid icon at the upper right corner of the website, and choose “Log in”. Then it will turn to the login page. Please enter the email address that you use to sign up for the Reolink account before and the password.
How do I reset my Reolink camera?
You may follow the steps below to reboot your camera or NVR via Reolink App.
- Launch your Reolink App, go to Device Settings-> Advance page.
- Find the Reboot button and click it, and then click OK to reboot it.
How do I connect to Reolink app?
Launch Reolink App, click “+” on the top right of the Devices page to add a new device. Step 2. For local access, we recommend you to add device by scanning the QR code. Note: You may tap Light to enable flash light when setting up in a dark environment.
Why is my camera not connecting to WiFi?
Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.
How do I reconnect my camera to WiFi?
Digital Camera WiFi Connection
- Press the Home or Menu button on your camera.
- Open Settings, then WiFi Setup or WiFi Options, if applicable.
- Make sure your camera’s WiFi connection is turned on.
- Your camera may automatically connect to your WiFi network.
- Enter your WiFi network’s password.
Why does my security camera go offline?
Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera’s components (broken parts or wires).
How do I reset my Argus Reolink?
How to Reset Argus PT
- Turn ON the power button to power the camera.
- Rotate the lens to find the reset hole. And then insert the reset needle into the reset hole of your camera.
- Press and hold for several seconds until you hear the prompt Factory reset succeeded.
Why does my security camera Say no signal?
One of the most common problems when a camera is not displaying video is a bad cable or BNC connection.If you do not get a video signal, disconnect the power cable from your camera. If you have a test monitor that can supply power to your camera, connect the power output of the monitor to your camera.
How do you reboot security cameras?
After the power cable plugged keep holding the reset button . The red PowerLED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another second and turn off again. This procedure takes around 20seconds and camera will power up. Release the reset button.
How do I restart NVR Reolink?
Reboot via Reolink Client
- Launch your Reolink Client, go to the Device settings -> System -> Maintenance.
- Click Reboot to reboot the NVR.
Contents