How Do I Turn On My Vivint Camera?

Tap the camera icon in the menu bar of your Vivint Smart Home app. Tap the settings gear icon in the upper right corner. Select the camera you want to enable Playback for.

Why is my Vivint camera not working?

Make sure the camera has power
Make sure the camera is plugged into a working outlet and the cord is securely plugged into the back of the camera. To test the outlet, unplug the camera and plug a different device into the same outlet. If it also doesn’t receive power, try restoring power to the outlet.

Why is my Vivint camera offline?

Your Vivint cameras are also dependent on your home wifi speeds.If your internet is inconsistent or drops off, your cameras may also drop off as a result. To learn how to check your panel connection to wifi, see SkyControl 3.0 – Connect to WiFi.

How do I test my Vivint camera?

From the home screen of the Vivint Smart Home app, tap the Cameras icon from the middle of the bottom navigation bar. To view a live feed, tap the thumbnail of the desired camera. Tap Done to go back to the main camera screen. To view recorded clips, tap All clips at the bottom of the camera screen.

Can Vivint cameras be turned off?

SkyControl 3.0 – Toggle Privacy Mode. Privacy mode allows you to temporarily disable your Vivint fixed camera’s remote viewing and recording capabilities. While in Privacy mode, your fixed camera will display a blue screen on your online account.

Where is my vivint camera plugged in?

The outdoor camera will have a power source that is wired through the wall and into your home near an outlet.

How do I reset my vivint camera?

2 How to factory reset the Ping camera
Grip the camera and unplug power from the rear. Press and hold the top button. While holding the top button, plug the power back into the camera. Continue to hold the button for another 20-45 seconds.

How do I get my cameras back online?

Disconnect the Camera from the Power Source and Power Cycle it. The very first thing to try in order to get your camera back online is to disconnect it from the power source. Unplug the camera and let it sit for a few minutes and after a few minutes have passed, plug the camera back in.

What does red light on Vivint camera mean?

The Vivint Indoor Camera was previously known as the Ping Camera. White: Connected/normal operation No Light: Privacy mode enabled or no power Green: Ready to connect Yellow: Rebooting Red: Not connected to the panel Breathing White: Connected to the panel, but not connected to the internet.

How do I get my video cameras back online on Vivint security system?

Restart your camera
Unplug your camera for 30 seconds, then plug it back in. If your camera is connected to a WiFi bridge, unplug the camera’s Ethernet cord from the bridge (usually located in an outlet near the camera) for 30 seconds then plug it back in.

Can you tell if someone is watching you on vivint?

Vivint monitoring center agents monitor Vivint security systems 24/7 to respond to alarms, but the agents do not access anyone’s camera streams or video recordings.If you use Vivint or are considering it, you will want to know how to keep your security system safe from potential hackers.

How do I access my vivint camera online?

Vivint Classic App – View Live Camera Feed

1. Login using the email address and password you set up during installation.
2. Press the video icon from the bottom of the screen.
3. Select the camera you wish to see from the pop out menu.
4. To view live Video, select the Live tab and press play on the camera you would like to view.

How do you play vivint again?

On the home screen, tap on the Cameras icon in the lower toolbar. Press the play button on the desired camera. Press the rewind button.

How do I turn off my Vivint panel?

Remove the panel cover
Remove the screw at the top of your panel with a screwdriver. To remove the panel cover, push the two tabs on top and pull the cover out and down. Hang the panel cover on the back plate using the white safety strip. Don’t be alarmed if you hear beeping.

Do Vivint cameras work without wifi?

Because Vivint is a totally wireless system, your Vivint cameras will continue to record even if you aren’t connected to the internet, but you won’t be able to receive live video monitoring or security alerts via the app.

How do I turn off the light on my Vivint?

Vivint Smart Hub – Adjust Brightness

1. From the home screen of the Smart Hub display, tap the Menu icon in the bottom right corner.
2. Tap Devices.
3. Enter 4-digit PIN.
4. Tap Smart Hub and then tap Display.
5. In the display menu, use the slider to adjust the brightness of the screen.

What happens if I reboot my Vivint camera?

The light will change from yellow to white during the reboot. After the light turns white, be sure to wait 5 minutes while your doorbell tries to re-establish a Wi-Fi connection.

How do I connect my Vivint camera to my phone?

Add Camera Using the WPS Button

1. Go to your router then locate and press the WPS button.
2. Go to your camera then locate and press the WPS button.
3. Go to www.alarm.com, and click Login.
4. Click Video then Settings.
5. Click Add Video Device.
6. The camera will be displayed on the screen to select from.

How do I use my Vivint camera without service?

Can I Still Use a Vivint Camera Without Service?

1. Vivint cameras cannot be used without service. They require the purchase of the Smart Home Video Monitoring monthly subscription plan.
2. You will have to pay your contract in full to cancel it early.
3. Those on a month-to-month contract can cancel anytime without penalty.

What does blue light on Vivint camera mean?

Solid Blue: Your device is powered on, and booting up. This is a normal file system check and could take a few minutes but up to several hours depending on how big the file system is. If it persists overnight, contact support. Slow Blinking Blue: Normal operation. Fast Blinking Blue: Installing updates.

What does reboot mean on a camera?

Reboot, restart, power cycle, and soft reset all mean the same thing.In more technical words, to reboot or restart something means to cycle the power state. When you turn the device off, it’s not receiving power. When it’s turned back on, it is getting power.