How Do I Turn On My Gas Supply On My Smart Meter Sse?

Press and hold the ( OK ) button on the main Prepay screen. Press the ( OK ) button to scroll through the menu until you reach Info—Supply. Then press and hold the ( OK ) button to enter. Press and hold the ( OK ) button to re-enable supply.

https://www.youtube.com/watch?v=oxOtG_oT-DE

How do I wake up my gas smart meter?

Taking readings on your smart meter
To take the reading from your gas meter, you’ll need to press a button to wake up the meter. Depending on your meter, it’ll be either an OK button, a red “A” button or a round button between two arrowed buttons. The reading will appear on the screen.

Why is my gas not showing on my smart meter?

No Electricity or Gas After Smart Meter Installation
If your electric smart meter is on but the display is blank, try to restart it by pressing B on the keyboard.If your gas supply is off, and you have a gas boiler, you need to double check if all your gas appliances are without gas or just the boiler.

What is the B button for on my gas meter?

This is your electricity reading. If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display.

How do I turn my gas back on with a smart meter?

Manually Reconnecting your 2nd Generation Smart Meter using your IHD

  1. Press the menu icon (it’s in the bottom right of your screen).
  2. Press TOP UP.
  3. Choose the fuel you want to reconnect.
  4. Press OK.
  5. Enter the 20-digit code you’ve got via email or text (you’ll get separate codes for electricity and gas).
See also  What Is A Water Heater Alarm?

How do I reconnect my British Gas smart meter?

Restore my electricity supply using my meter

  1. Look at the meter reading screen on your electricity meter.
  2. Press A twice.
  3. Press B to restore the electricity supply.

How do I re enable my gas supply SSE?

Press and hold the ( OK ) button on the main Prepay screen. Press the ( OK ) button to scroll through the menu until you reach Info—Supply. Then press and hold the ( OK ) button to enter. Press and hold the ( OK ) button to re-enable supply.

How do you read a smart meter with A and B button?

If your meter has A and B buttons under the screen

  1. press the A button.
  2. press the A button again until you see ‘METER INDEX’ and numbers followed by ‘M3’
  3. write down the number from left to right.
  4. ignore any zeroes at the beginning and any numbers after the decimal point.

How do I take a smart meter reading?

To get a reading from these smart meters:

  1. Press 9 on the keypad.
  2. A series of letters will appear: IMP KWH.
  3. Then you’ll see 8 digits (e.g. 0012565.3) followed by kWh at the bottom right of the screen.
  4. This is your read, so in this case your reading would be 12565.

How does a gas smart meter work?

Smart meters are the new generation of gas and electricity meters.Smart meters record your energy use in the same way as a traditional meter but then send the readings automatically to your energy supplier at least monthly, allowing them to prepare an accurate bill.

How do I get a gas reading?

To read correctly:

  1. Read the dials from left to right.
  2. If the pointer is between two numbers, always take the lower number.
  3. If the pointer falls between 9 and 0, write down 9.
  4. Ignore red dials, ones marked ‘100 per rev’ and the largest dial.
See also  Why Is My Iphone Getting Hot And Battery Draining?

Do smart gas meters have batteries?

While electric smart meters are wired into the National Grid, the gas ones are powered by batteries designed to last for at least a decade.Once the gadget dies, the gas supply in some cases is automatically turned off and an engineer has to replace the battery unit before the supply is reconnected.

How do I activate my gas meter?

To activate your gas supply:

  1. Press any button on your PAYG gas meter to wake it up.
  2. Press the black button (‘B’) on your meter – you’ll see ‘For gas’ appear in the bottom half of the screen.
  3. Now press and hold the black button until told to release.

How do I turn my gas back on after disconnecting?

You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.

How do I reconnect my smart meter?

To restore the lost connection to your smart meter, you’ll need to:

  1. Take your In-Home Display to where your electricity meter is located.
  2. Once you’re close to the meter, hold down the “OK button” until the In-Home Display turns off and then on again.
  3. You should then see the message: “your smart meter is now paired”.

What do I do if my smart meter is not working?

Try moving your In-Home Display closer to your electricity smart meter. Once you’re there, turn it off using the round, flat button at the back. Wait a minute and then press the button again to switch the IHD back on. Sometimes, this gives it the boost it needs to get going again.

See also  How Do You Prime A Pump With A Check Valve?

Why is my British gas Card not working?

Your meter or card could be broken – wipe the gold chip on the card and try again. Check your meter for error messages too. If there is one, check Understanding messages on your meter. If there’s no error message on your meter and your card isn’t working at your local Payzone then you need a new card.

How do you read a gas smart meter with A and B button EDF?

If your meter has A and B buttons under the screen

  1. press the A button.
  2. press the A button again until you see ‘TOTAL ACT IMPORT’ and numbers followed by ‘KWH’
  3. write down the number from left to right.
  4. ignore any zeroes at the beginning and any numbers after the decimal point.

Can you read a smart meter yourself?

If you prefer to take electricity and gas readings for yourself, here’s how you can check how much energy you’re using by reading your smart meter. You can read your smart meter by taking a look at your in-house smart meter display unit.

Does a smart meter read gas and electric?

Smart meters measure how much gas and electricity you’re using, as well as what it’s costing you and display this on a handy in-home display.

How do you read a gas and electric meter?

To read the meter:

  1. Read the first 4 dials from left to right – ignore the large dials or red dials.
  2. If the pointer is between two numbers, write down the lower number – if it’s between 9 and 0, write down 9.
  3. If the pointer is directly over a number, write down that number.

Contents

This entry was posted in Smart Home by Silvia Barton. Bookmark the permalink.
Avatar photo

About Silvia Barton

Silvia Barton is someone who really enjoys smart devices. She thinks they make life a lot easier and more fun. Silvia loves to try out new gadgets and she's always on the lookout for the latest and greatest thing in the world of technology.