How Do I Turn On My Ecobee Bluetooth?

Pairing your Bluetooth speaker: Open up your Amazon Alexa app and select the icon in the bottom right corner named “Devices.” Once your ecobee thermostat is paired with the Bluetooth device, you’ll be able to see the name of the connected speaker by pressing the Voice icon ( ) on your ecobee’s display.

Does ecobee have Bluetooth?

Ecobee’s sensors have also been redesigned. And with the new addition of Bluetooth support, users will be able to stream music services including Spotify, Pandora, and Amazon Music from the thermostat to a discrete Bluetooth speaker.

How do I make ecobee discoverable?

How to enable the ecobee skill

1. Open the Alexa app and tap the top left Menu icon.
2. Tap Skills & Games.
3. Tap the magnifying glass icon and type in “ecobee” to search for the ecobee skill.
4. Tap ecobee from the list of skills.
5. Tap Enable to enable the skill.

Why is my ecobee not connecting to my phone?

If your ecobee is connected to your home network but is unable to connect to ecobee servers, the issue may be caused by security settings on your router. To check if your ecobee is connected to ecobee servers, go to MAIN MENU > ABOUT > WI-FI > CONNECTED TO ECOBEE.COM.

How do I connect ecobee to Spotify?

Now you can use your voice to control Spotify on your ecobee.

1. Launch the Amazon Alexa app.
2. Tap the Hamburger menu ( ) in the top-left corner, then select Settings.
3. Under Alexa Preferences, select Music.
4. Under Music Services, select Link account on Spotify.com.

Can you listen through ecobee?

An updated microphone makes it even easier to summon Alexa’s, and the addition of a Bluetooth radio gives you the option of pairing external speakers to the Ecobee in the pursuit of higher-quality audio streaming. The new Ecobee can do pretty much anything an Amazon Echo smart speaker can do.

How do I set up ecobee on my iPhone?

ecobee app (iOS 11+)

1. Open the ecobee app on your iPhone.
2. Tap the Account icon in the bottom right corner.
3. Select HomeKit under Integrations in the Menu.
4. Tap + on the top-right corner.
5. Choose Add Thermostat from the drop-down menu.
6. Select the home you’d wish to add your ecobee to, then tap Next.

How do I reconnect my ecobee to WIFI?

To connect your Ecobee thermostat to your Wi-Fi network:

1. From the Home screen, press Menu.
2. Then select Settings.
3. Go to Wi-Fi.
4. Make sure Wi-Fi Radio is Enabled.
5. Go to Network.
6. Tap on Select Wi-Fi Network.
7. Pick your Wi-Fi network from the list and enter your Wi-Fi password if required.
8. Tap OK to exit.

How do I connect my Samsung phone to ecobee?

How to connect your ecobee to Samsung SmartThings

1. Tap Marketplace.
2. Under Things, tap Thermostats or Switch/Dimmer.
3. Select your ecobee device.
4. Tap Connect Now.
5. Tap ecobee.
6. Enter your ecobee credentials (email address and password)
7. Tap Log In.
8. Tap Accept to authorize SmartThings to access your ecobee account.

Why is my ecobee unresponsive?

This is most likely happening because your ecobee is not connected to wi-fi or your ecobee mobile app. To check your ecobee’s wi-fi connection, from your ecobee select Menu > Settings > Wi-Fi > Wi-Fi Enabled > Network. If so, log in to the ecobee app and ensure your thermostat is connected.

Where is the registration code on ecobee?

Obtaining the Registration Code
Tap the three horizontal bars on the bottom left corner of the ecobee screen to open the Main Menu. After completing these steps, the code will then be displayed on the thermostat’s screen.

How do I control ecobee with Siri?

Setting up the integration is simple: pair the Ecobee to HomeKit from the thermostat’s screen, then add it as an accessory through the Home app, and an option to “Speak to Siri” will pop up. From there, you can tailor the experience (such as deciding if you want to enable personal requests).

How do I reconnect my ecobee switch?

Follow these steps to ensure your Switch+ is ready for setup:

1. Press and hold the main button for 5 seconds.
2. Wait for the voice prompt to say “Reset to factory settings.”
3. Press the main button again.
4. Wait for the amber light to illuminate (about 30 seconds).
5. Retry registration using the ecobee app.

How do I connect my thermostat to Wi-Fi?

Sign in to your Wi-Fi network

1. Press the thermostat ring to bring up the Quick View menu.
2. Select Settings .
3. Turn the ring and Select Network.
4. Select the new Wi-Fi network name and enter the new password. It may take a few moments for your network to appear.

Does ecobee work with Apple music?

Both SmartThermostat with voice control and ecobee4 support Amazon Music, TuneIn, and iHeartRadio. ecobee DOES NOT currently support Apple Music. You can ask Alexa to play music, podcasts, audiobooks, and more on your SmartThermostat with voice control or ecobee4.

Can ecobee connect to Alexa?

All ecobee devices are compatible with your Amazon Echo and Dot devices, which means you can control your ecobee device with your Amazon Alexa device.

How do you use ecobee with voice control?

Using the ecobee app to enable Alexa on your ecobee thermostat:

1. Sign in to the app using your registered ecobee username and password.
2. Select your thermostat, and tap the Microphone icon on the bottom-right corner of the screen.
3. Tap Sign in with Amazon.
4. Sign in with your Amazon account credentials.

Can you use ecobee as a speaker?

Ecobee’s SmartThermostat doubles as an Alexa speaker. The SmartThermostat also works with 2.4GHz and 5GHz Wi-Fi, whereas the the Ecobee4 only worked on 2.4GHz networks.

Does ecobee work with Iphone?

The ecobee app is compatible with all iOS and Android devices including iPad and Apple Watch. To know more about the ecobee Apple Watch app, see our ecobee Watch App FAQ.

How do I enable ecobee HomeKit?

On Your Mobile Device

1. Launch the ecobee app.
2. Go to the Menu in the top left.
3. Select Setup Homekit.
4. Tap Get started.
5. Enter a name for your home then tap Done.
6. Select the right home for your location, if you have more homes listed, then tap Next.

How does ecobee geofencing work?

Geofencing, or location-based triggering, uses your phone to detect when you’ve crossed a set boundary, and sends a corresponding signal to the iCloud servers.