The Drag S comes with an Auto-draw mode, you can of course switch between using the button instead, as well as both at the same time by clicking the fire button 3 times.
How do you change modes in VooPoo drag S?
Voopoo Drag S How to use/button functionality
Changing modes: Tap the fire button three times to change from ‘RBA’ to ‘smart’ modes. The DRAG S also lets you change between drag and button tap firing.
What is RBA mode on drag S?
RBA mode really is just standard variable wattage allowing to adjust right up to the maximum 60w whatever the resistance is.
How do I change the settings on my drag vape?
Press up and down buttons simultaneously to make adjustment manually. And press fire button shortly time will cause the device go into the next 1-second-adjustment. Then press the fire button for 1.5 seconds to save the setting and go back to the customization mode.
How do you unlock drag S?
– Lock / Unlock = Press the Fire button and ‘+’ (up) button simultaneously. – Mode Switching = Quickly press the fire button 3 times.
Is VooPoo drag s MTL?
The VooPoo Drag S Kit is the perfect pocket friendly pod kit. It offers both STL (straight-to-lung) and MTL (mouth-to-lung) vaping with its variety of coils. The Drag S has 60W of power and a 2600mAh battery inside.
Which PnP coil is best?
The 0.15 Ohm VM6 PNP coils low resistance means they can be used for Direct To Lung vaping, working best between 60 – 80W. For best results, we recommend a high VG e-liquid that’s 70% VG or higher.
VooPoo PNP VM Coils.
| Coil Resistance | 0.15ohm, 0.2ohm, 0.3ohm, 0.45ohm, 0.6ohm |
|---|---|
| Pack Size | 5 Pack |
Why is my Voopoo not working?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.
How do I turn off VooPoo drag S?
Operating The VooPoo Drag S Mod
- Turn On/ Off = Press fire button 5 times.
- Clear puff count = Press the fire button and ‘-‘ (down) button simultaneously.
- Lock / Unlock = Press the Fire button and ‘+’ (up) button simultaneously.
- Mode Switching = quickly press fire button 3 times.
What does SS mean on VooPoo drag?
Wattage/Voltage (Power Mode)
Appropriate Wire Materials: Kanthal, Stainless Steel (SS), NiChrome (NiCr) Wattage and Voltage Mode, also referred to as Power Mode, is the most common mod setting for vapers because of its simplicity and effectiveness.
What temp should VooPoo drag be?
Temperature control adjustable range : 200-600 F / 100-315C – When the temperature setting is at 1000, keep pressing “-“, it will turn to be 600 F; – When the temperature setting is at 200 F, keep pressing -, it will turn to be 315°C. c).
Why is my vape locked?
When You First Receive Your Vape Pen, It Will Be Locked
Generally, when you first buy your vape pen, it will be in the locked position. This is for safety reasons as well as giving protection to the battery. However, you do need to check whether it is on or off when you first open the packaging.
Can I use salt NIC in drag S?
From there users can fill it up with any nic salt or freebase e-liquid. With a maximum juice capacity of 4.5ml and a vast amount of various PnP Replacement Coils this device offers a great vaping experience for new and seasoned vapers alike.
Can you use salt NIC in a Voopoo drag S?
The VOOPOO DRAG S Kit is a incredibly versatile vaping system that can be geared for nicotine salts or regular eJuice, featuring the advanced Gene.
What coils does the drag s take?
The DRAG S comes pre-packaged with two coils from the VOOPOO PnP Coil series. Inside the box you will find a 0.3 ohm PnP-VM1 Mesh Coil rated for 32W to 40W and a 0.2 ohm PnP-VM5 Mesh Coil rated for 40W to 60W.
What coils does drag s use?
The new 0.2 Ohm PnP VM5 Mesh coil can be used between 40 60w and is compatible with the Drag S and Drag X Kits, For best results we recommend pairing it with a high VG e-liquid, that’s 60% VG or higher.
What coils are compatible with drag S?
DRAG S is compatible with all PnP coils including RBA, just pull and push, you can enjoy different vaping experience, fast and affordable.
Why is my Voopoo drag s not working?
If the Voopoo Find S doesn’t work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn’t working, an error message should appear on the screen.
Why wont my Voopoo drag mini turn on?
Voopoo Drag 2 Not Turning On
This issue is caused due to board failure. All you need to do is get a new board for your device.
If your e-cigarette does have a fire button, it can be turned on by pressing the button five times quickly in succession. For most e-cigarettes, you’ll need to press the fire button 5 times in 2 seconds – this is to prevent your device going off unexpectedly in your bag or pocket!
How do I unlock my geek vape?
If your Geek Vape Aegis Hero isn’t hitting when you hold the fire button, you should first check to confirm that you haven’t locked the device. Press the fire button five times to unlock it.
Contents